mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 23:25:09 +08:00
4a5673746c
These are overrides of default_value while there is a value defined. As such these overrides had no effect at all. Changing them to value can actually change the behaviour of the profile. That is not what the profile author has apparently tested with, so I'm not doing that. I'm just removing the unused data. In the future if we get new definitions the author gets notified of the error so that he may test more effectively. The legacy can't be fixed without re-testing, so I'm leaving that to the authors. Done during Turbo Testing & Tooling. I want to go home for the weekend now...
43 lines
2.9 KiB
JSON
43 lines
2.9 KiB
JSON
{
|
|
"name": "Julia",
|
|
"version": 2,
|
|
"inherits": "fdmprinter",
|
|
"metadata": {
|
|
"visible": true,
|
|
"author": "Ultimaker",
|
|
"manufacturer": "Fracktal",
|
|
"file_formats": "text/x-gcode",
|
|
"platform_offset": [ 0, 0, 0],
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "julia_extruder_0"
|
|
}
|
|
},
|
|
|
|
"overrides": {
|
|
"machine_start_gcode": {
|
|
"default_value": " ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n ;metric values\n M107\n G28\n G29\n G90 ;absolute positioning\n G92 E0; reset extruder distance\n G1 Z5 F300 ;move nozzle up 5mm for safe homing\n G1 X0 Y0 Z0 F5000; move nozzle to home\n M300 S600P200\n M300 S800 P200\n M190 S{material_bed_temperature} ;Uncomment to add your own bed temperature line\n M109 S{material_print_temperature} ;Uncomment to add your own temperature line\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E3 ;extrude 3mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel}\n ;Put printing message on LCD screen\n M117 Printing...\n"
|
|
},
|
|
"machine_end_gcode": {
|
|
"default_value": " M104 S0 ;extruder heater off\n M140 S0 ;heated bed heater off (if you have it)\n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning\n"
|
|
},
|
|
"layer_height": { "default_value": 0.2 },
|
|
"support_angle": { "default_value": 30 },
|
|
"layer_height_0": { "default_value": 0.2 },
|
|
"speed_print": { "default_value": 80 },
|
|
"prime_tower_size": { "default_value": 8.660254037844387 },
|
|
"retraction_amount": { "default_value": 3 },
|
|
"support_pattern": { "default_value": "grid" },
|
|
"infill_sparse_density": { "default_value": 10 },
|
|
"machine_extruder_count": { "default_value": 1 },
|
|
"retraction_combing": { "default_value": "off" },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"machine_height": { "default_value": 260 },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_depth": { "default_value": 250 },
|
|
"machine_width": { "default_value": 210 },
|
|
"machine_name": { "default_value": "Julia V2" }
|
|
}
|
|
}
|