mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 23:55:08 +08:00
71197e9101
This removes all settings that are equal to the defaults. Some settings are 'common' between all profiles of the same material. I've let those settings bubble up to the material profiles but that change is then obviously only apparent in the fdm_materials repository. Contributes to issue CURA-3960.
66 lines
2.2 KiB
INI
66 lines
2.2 KiB
INI
[general]
|
|
version = 2
|
|
name = Sprint
|
|
definition = ultimaker3
|
|
|
|
[metadata]
|
|
type = quality
|
|
quality_type = superdraft
|
|
material = generic_tpu_ultimaker3_AA_0.8
|
|
weight = -4
|
|
setting_version = 1
|
|
|
|
[values]
|
|
brim_width = 8.75
|
|
cool_min_layer_time_fan_speed_max = 6
|
|
expand_skins_expand_distance = =line_width * 2
|
|
expand_skins_into_infill = True
|
|
expand_upper_skins = True
|
|
gradual_infill_step_height = =4 * layer_height
|
|
gradual_infill_steps = 5
|
|
infill_before_walls = True
|
|
infill_line_width = =round(line_width * 0.7 / 0.8, 2)
|
|
infill_pattern = tetrahedral
|
|
infill_sparse_density = 80
|
|
jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
|
|
jerk_support = =math.ceil(jerk_print * 25 / 25)
|
|
jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
|
|
layer_height = 0.4
|
|
machine_nozzle_cool_down_speed = 0.5
|
|
machine_nozzle_heat_up_speed = 2.5
|
|
material_bed_temperature_layer_0 = 0
|
|
material_final_print_temperature = =material_print_temperature - 21
|
|
material_flow = 105
|
|
material_initial_print_temperature = =material_print_temperature - 16
|
|
material_print_temperature = =default_material_print_temperature + 2
|
|
material_print_temperature_layer_0 = =default_material_print_temperature + 2
|
|
multiple_mesh_overlap = 0.2
|
|
prime_tower_enable = True
|
|
prime_tower_flow = 100
|
|
prime_tower_wall_thickness = =prime_tower_line_width * 2
|
|
retract_at_layer_change = False
|
|
retraction_count_max = 12
|
|
retraction_extra_prime_amount = 0.5
|
|
retraction_hop = 1.5
|
|
retraction_hop_only_when_collides = False
|
|
retraction_min_travel = 0.8
|
|
retraction_prime_speed = 15
|
|
skin_line_width = =round(line_width * 0.78 / 0.8, 2)
|
|
speed_print = 30
|
|
speed_topbottom = =math.ceil(speed_print * 20 / 30)
|
|
speed_travel = 300
|
|
speed_wall = =math.ceil(speed_print * 30 / 30)
|
|
speed_wall_x = =math.ceil(speed_wall * 30 / 30)
|
|
support_angle = 50
|
|
support_bottom_distance = =support_z_distance
|
|
support_line_width = =round(line_width * 0.7 / 0.8, 2)
|
|
support_offset = =line_width
|
|
switch_extruder_prime_speed = 15
|
|
switch_extruder_retraction_amount = 20
|
|
switch_extruder_retraction_speeds = 45
|
|
top_bottom_thickness = 1.2
|
|
travel_avoid_distance = 1.5
|
|
travel_compensate_overlapping_walls_0_enabled = False
|
|
wall_0_wipe_dist = =line_width * 2
|
|
wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
|
|
wall_thickness = 1.3 |