mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 18:55:14 +08:00
91 lines
4.4 KiB
JSON
91 lines
4.4 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Discov3ry Complete",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "Andrew Finkle, CTO",
|
|
"manufacturer": "Structur3d.io",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "ultimaker2_platform.obj",
|
|
"firmware_file": "MarlinUltimaker2plus.hex",
|
|
"first_start_actions": [],
|
|
"has_machine_quality": false,
|
|
"has_materials": true,
|
|
"has_variants": true,
|
|
"machine_extruder_trains": { "0": "structur3d_discov3ry1_complete_um2plus_extruder_0" },
|
|
"platform_offset": [
|
|
0,
|
|
0,
|
|
0
|
|
],
|
|
"platform_texture": "Ultimaker2Plusbackplate.png",
|
|
"preferred_material": "structur3d_dap100silicone",
|
|
"preferred_quality_type": "extra_fast",
|
|
"preferred_variant_name": "0.84mm (Green)",
|
|
"supported_actions": [],
|
|
"variants_name": "Print core"
|
|
},
|
|
"overrides":
|
|
{
|
|
"adhesion_type": { "default_value": "skirt" },
|
|
"gantry_height": { "value": "52" },
|
|
"infill_sparse_density": { "value": 100 },
|
|
"layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
|
|
"line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" },
|
|
"machine_depth": { "default_value": 205 },
|
|
"machine_disallowed_areas":
|
|
{
|
|
"default_value": [
|
|
[
|
|
[-115, 112.5],
|
|
[-78, 112.5],
|
|
[-80, 102.5],
|
|
[-115, 102.5]
|
|
],
|
|
[
|
|
[115, 112.5],
|
|
[115, 102.5],
|
|
[105, 102.5],
|
|
[103, 112.5]
|
|
],
|
|
[
|
|
[-115, -112.5],
|
|
[-115, -104.5],
|
|
[-84, -104.5],
|
|
[-82, -112.5]
|
|
],
|
|
[
|
|
[115, -112.5],
|
|
[108, -112.5],
|
|
[110, -104.5],
|
|
[115, -104.5]
|
|
]
|
|
]
|
|
},
|
|
"machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off \nM140 S0 ;heated bed heater off (if you have it) \nM92 E282 ;reset extruder EEPROM steps/mm for plastic filament \nG91 ;relative positioning \nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure \nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more \nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way \nM84 ;steppers off\nG90 ;absolute positioning" },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[-44, 14],
|
|
[-44, -34],
|
|
[64, 14],
|
|
[64, -34]
|
|
]
|
|
},
|
|
"machine_heat_zone_length": { "default_value": 20 },
|
|
"machine_height": { "default_value": 205 },
|
|
"machine_name": { "default_value": "Discov3ry Complete (Ultimaker 2+)" },
|
|
"machine_nozzle_head_distance": { "default_value": 5 },
|
|
"machine_show_variants": { "default_value": true },
|
|
"machine_start_gcode": { "default_value": "\n;Updated Firmware (.hex and Marlin .ino) for \n;Ultimaker 2+ with Discov3ry Extruder available at: \n;https://github.com/Structur3d/UM2.1Discov3ry-Firmware-beta \n;**Learn more at https://www.structur3d.io** \n \nM104 S{material_print_temperature} ;Start heating extruder \nM140 S{material_bed_temperature} ;Start heating bed \nG21 ;metric values \nG90 ;absolute positioning \nM82 ;set extruder to absolute mode \nM107 ;start with the fan off \nM302 ;allow cold extrusion \nM92 E2589 ;set extruder EEPROM steps/mm for paste \nG28 Z0 ;move Z to bottom endstops \nG28 X0 Y0 ;move X/Y to endstops \nG1 X15 Y0 F4000 ;move X/Y to front of printer \nG1 Z15.0 F9000 ;move the platform to 15mm \nG92 E0 ;zero the extruded length \nG1 F200 E10 ;extrude 10 mm of feed stock \nG92 E0 ;zero the extruded length again \nG1 F9000 \n;Put printing message on LCD screen \nM117 Printing..." },
|
|
"machine_width": { "default_value": 205 },
|
|
"retraction_hop_enabled": { "value": true },
|
|
"skirt_brim_minimal_length": { "value": 1500 },
|
|
"speed_print": { "value": 15 },
|
|
"speed_support": { "value": "speed_wall_0" },
|
|
"speed_wall_x": { "value": "speed_wall" }
|
|
}
|
|
} |