mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-05-19 00:37:30 +08:00
35 lines
2.4 KiB
JSON
35 lines
2.4 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "JGAurora JGMaker Magic",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "Samuel Pinches",
|
|
"manufacturer": "JGAurora",
|
|
"file_formats": "text/x-gcode",
|
|
"machine_extruder_trains": { "0": "jgaurora_jgmaker_magic_extruder_0" },
|
|
"preferred_quality_type": "fast"
|
|
},
|
|
"overrides":
|
|
{
|
|
"gantry_height": { "value": "10" },
|
|
"layer_height_0": { "default_value": 0.2 },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"machine_depth": { "default_value": 220 },
|
|
"machine_end_gcode": { "default_value": "; -- END GCODE --\nM104 S0 ;turn off nozzle heater\nM140 S0 ;turn off bed heater\nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament slightly\nG90 ;set to absolute positioning\nG28 X0 ;move to the X-axis origin (Home)\nG0 Y280 F600 ;bring the bed to the front for easy print removal\nM84 ;turn off stepper motors\n; -- end of END GCODE --" },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_height": { "default_value": 250 },
|
|
"machine_name": { "default_value": "JGAurora JGMaker Magic" },
|
|
"machine_start_gcode": { "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 ;home all axis\nM420 S1 ;turn on mesh bed levelling if enabled in firmware\nG92 E0 ;zero the extruded length\nG1 Z1 F1000 ;move up slightly\nG1 X60.0 Z0 E9.0 F1000.0;intro line\nG1 X100.0 E21.5 F1000.0 ;continue line\nG92 E0 ;zero the extruded length again\n; -- end of START GCODE --" },
|
|
"machine_width": { "default_value": 220 },
|
|
"material_diameter": { "default_value": 1.75 },
|
|
"retraction_amount": { "default_value": 5 },
|
|
"retraction_enable": { "default_value": true },
|
|
"retraction_speed": { "default_value": 50 },
|
|
"speed_print": { "default_value": 60 },
|
|
"support_enable": { "default_value": true },
|
|
"wall_thickness": { "value": "1.2" }
|
|
}
|
|
} |