mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-06-29 19:25:11 +08:00
cf922295db
A lot was changed in support. The short of it is that we now think towers should be on by default, but aren't _completely_ certain about it. It makes more sense to do make this change before the beta rather than just before stable, so we have a chance to revert should it prove disastrous.
148 lines
7.8 KiB
JSON
148 lines
7.8 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Geeetech Base Multi-Extruder Printer",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": false,
|
|
"author": "Teddy.Hu",
|
|
"manufacturer": "Geeetech",
|
|
"file_formats": "text/x-gcode",
|
|
"first_start_actions": [ "MachineSettingsAction" ],
|
|
"has_machine_quality": true,
|
|
"has_materials": true,
|
|
"has_variants": false,
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "Geeetech_Multi_Extruder_0",
|
|
"1": "Geeetech_Multi_Extruder_1",
|
|
"2": "Geeetech_Multi_Extruder_2"
|
|
},
|
|
"preferred_material": "generic_pla",
|
|
"preferred_quality_type": "standard",
|
|
"preferred_variant_name": "0.4mm Nozzle",
|
|
"quality_definition": "Geeetech_Base_Single_Extruder",
|
|
"variants_name": "Nozzle Size"
|
|
},
|
|
"overrides":
|
|
{
|
|
"acceleration_print": { "value": 500 },
|
|
"acceleration_travel": { "value": 500 },
|
|
"acceleration_travel_layer_0": { "value": "acceleration_travel" },
|
|
"adhesion_type": { "value": "'skirt'" },
|
|
"brim_replaces_support": { "value": false },
|
|
"cool_min_layer_time": { "value": "1.3 if speed_infill>=200 else 5" },
|
|
"gantry_height": { "value": 40 },
|
|
"infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'grid'" },
|
|
"line_width": { "value": "1.125*machine_nozzle_size if speed_infill<=100 else machine_nozzle_size" },
|
|
"machine_acceleration": { "value": 500 },
|
|
"machine_depth": { "default_value": 350 },
|
|
"machine_end_gcode": { "default_value": ";Geeetech Custom end G-code\nG91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers\n\n\n" },
|
|
"machine_extruder_count": { "default_value": 3 },
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[-40, 40],
|
|
[40, 40],
|
|
[40, -40],
|
|
[-40, -40]
|
|
]
|
|
},
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_height": { "default_value": 350 },
|
|
"machine_max_acceleration_e": { "value": 1000 },
|
|
"machine_max_acceleration_x": { "value": 500 },
|
|
"machine_max_acceleration_y": { "value": 500 },
|
|
"machine_max_acceleration_z": { "value": 111 },
|
|
"machine_max_feedrate_e": { "value": 40 },
|
|
"machine_max_feedrate_x": { "value": 500 },
|
|
"machine_max_feedrate_y": { "value": 500 },
|
|
"machine_max_feedrate_z": { "value": 10 },
|
|
"machine_max_jerk_e": { "value": 4.9 },
|
|
"machine_max_jerk_xy": { "value": 10 },
|
|
"machine_max_jerk_z": { "value": 0.3 },
|
|
"machine_name": { "default_value": "Geeetech Base Multi-Extruder Printer" },
|
|
"machine_start_gcode": { "default_value": ";Geeetech Custom Start G-code\nM104 S{material_print_temperature_layer_0} ;Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ;Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ;Wait for Hotend Temperature\nG92 E0 ;Reset Extruder\nG28 ;Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ;ON Light\n;M106 P0 S383 ;ON MainFan 150% if need\n;M106 P1 S255 ;ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ;Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ;Draw the first line\nG92 E0 ;Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ;Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ;Scrape off nozzle residue" },
|
|
"machine_width": { "default_value": 350 },
|
|
"material_bed_temperature": { "maximum_value_warning": 110 },
|
|
"material_final_print_temperature": { "value": "material_print_temperature" },
|
|
"material_initial_print_temperature":
|
|
{
|
|
"minimum_value_warning": "material_standby_temperature - 10",
|
|
"value": "material_print_temperature - 5"
|
|
},
|
|
"material_print_temperature":
|
|
{
|
|
"maximum_value": "250",
|
|
"value": "200 if speed_infill <=100 else 210 if speed_infill <= 150 else 220 if speed_infill <= 180 else 230"
|
|
},
|
|
"material_print_temperature_layer_0":
|
|
{
|
|
"maximum_value_warning": 250,
|
|
"value": "material_print_temperature + 5"
|
|
},
|
|
"minimum_interface_area": { "value": 10 },
|
|
"minimum_support_area": { "value": 2 },
|
|
"optimize_wall_printing_order": { "value": true },
|
|
"prime_tower_brim_enable": { "value": true },
|
|
"prime_tower_min_volume":
|
|
{
|
|
"maximum_value_warning": 150,
|
|
"value": 85
|
|
},
|
|
"prime_tower_size": { "value": 30 },
|
|
"retraction_combing": { "value": "'off' if retraction_hop_enabled else 'all'" },
|
|
"retraction_combing_max_distance": { "value": 30 },
|
|
"retraction_hop": { "value": 0.5 },
|
|
"retraction_speed": { "value": 35 },
|
|
"skirt_brim_speed":
|
|
{
|
|
"maximum_value_warning": "60",
|
|
"value": "speed_print_layer_0"
|
|
},
|
|
"skirt_gap": { "value": 6 },
|
|
"small_hole_max_size": { "value": "5 if speed_infill>=150 else 0" },
|
|
"speed_layer_0":
|
|
{
|
|
"maximum_value_warning": "100",
|
|
"value": "50 if speed_infill <= 150 else 75"
|
|
},
|
|
"speed_print_layer_0":
|
|
{
|
|
"maximum_value_warning": "60",
|
|
"value": "25 if speed_infill <= 150 else 35"
|
|
},
|
|
"speed_support": { "value": "speed_print*0.5" },
|
|
"speed_support_bottom": { "value": "speed_support_roof" },
|
|
"speed_support_interface": { "value": "speed_support / 0.8" },
|
|
"speed_support_roof": { "value": "speed_support_interface / 2" },
|
|
"speed_topbottom": { "value": "speed_print" },
|
|
"speed_travel": { "value": "200 if 120<=speed_print<=200 else speed_print if speed_print>200 else 120" },
|
|
"speed_travel_layer_0":
|
|
{
|
|
"maximum_value_warning": "150",
|
|
"value": "speed_layer_0"
|
|
},
|
|
"speed_wall": { "value": "60 if speed_print==60 else math.ceil(round(speed_print*0.90))" },
|
|
"speed_wall_0": { "value": "30 if speed_print==60 else math.ceil(round(speed_print*0.75))" },
|
|
"speed_wall_x": { "value": "60 if speed_print==60 else math.ceil(round(speed_print*0.90))" },
|
|
"support_brim_enable": { "value": true },
|
|
"support_brim_width": { "value": 5 },
|
|
"support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
|
|
"support_interface_density": { "value": 33.333 },
|
|
"support_interface_height": { "value": "layer_height * 3" },
|
|
"support_interface_pattern": { "value": "zigzag" },
|
|
"support_interface_skip_height": { "value": 0.2 },
|
|
"support_pattern": { "value": "'zigzag'" },
|
|
"support_wall_count": { "value": 0 },
|
|
"support_xy_distance": { "value": "wall_line_width_0 * 2" },
|
|
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
|
"support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
|
|
"top_bottom_thickness": { "value": "layer_height_0 + layer_height * 3" },
|
|
"travel_avoid_supports": { "value": true },
|
|
"wall_thickness": { "value": "line_width * 2" },
|
|
"wall_transition_filter_deviation": { "value": 0.15 },
|
|
"z_seam_corner": { "value": "'z_seam_corner_inner'" },
|
|
"z_seam_type": { "value": "'sharpest_corner'" }
|
|
}
|
|
} |