mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-04-29 15:25:02 +08:00
9088ab23f4
In the initial PR for PP-71 I only cleaned up material_final_print_temperatures, but now the material_initial_print_temperatures are also coming into play, so I cleaned those as well. From research for PP-123 I know this is a safe change. Due to this cleanup the cool_min_temperature can now always follow the ultimaker default settings.
35 lines
992 B
INI
35 lines
992 B
INI
[general]
|
|
definition = ultimaker3
|
|
name = AA 0.25
|
|
version = 4
|
|
|
|
[metadata]
|
|
hardware_type = nozzle
|
|
setting_version = 21
|
|
type = variant
|
|
|
|
[values]
|
|
brim_width = 7
|
|
cool_min_layer_time = 0
|
|
machine_nozzle_cool_down_speed = 0.85
|
|
machine_nozzle_heat_up_speed = 1.5
|
|
machine_nozzle_id = AA 0.25
|
|
machine_nozzle_size = 0.25
|
|
machine_nozzle_tip_outer_diameter = 0.65
|
|
retraction_min_travel = 0.7
|
|
retraction_prime_speed = =retraction_speed
|
|
skin_overlap = 15
|
|
speed_print = 55
|
|
speed_topbottom = 20
|
|
speed_wall = =math.ceil(speed_print * 30 / 55)
|
|
support_angle = 60
|
|
support_bottom_distance = =support_z_distance / 2
|
|
support_top_distance = =support_z_distance
|
|
support_z_distance = =layer_height * 2
|
|
switch_extruder_prime_speed = =switch_extruder_retraction_speeds
|
|
switch_extruder_retraction_amount = =machine_heat_zone_length
|
|
top_bottom_thickness = 1.2
|
|
wall_thickness = =wall_line_width_0 + wall_line_width_x * 2
|
|
xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
|
|
|