mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-02 03:20:38 +08:00
86 lines
4.1 KiB
JSON
86 lines
4.1 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "fusedform_doppia_base",
|
|
"inherits": "fusedform_base",
|
|
"metadata":
|
|
{
|
|
"visible": false,
|
|
"author": "Juan Blanco",
|
|
"manufacturer": "Fused Form",
|
|
"exclude_materials": [ "structur3d_dap100silicone" ],
|
|
"has_machine_quality": true,
|
|
"has_materials": true,
|
|
"machine_extruder_trains":
|
|
{
|
|
"0": "fusedform_doppia_base_extruder_0",
|
|
"1": "fusedform_doppia_base_extruder_1"
|
|
},
|
|
"preferred_material": "generic_pla",
|
|
"preferred_quality_type": "normal"
|
|
},
|
|
"overrides":
|
|
{
|
|
"adhesion_type": { "default_value": "skirt" },
|
|
"cool_fan_enabled": { "default_value": true },
|
|
"cool_fan_full_at_height": { "value": 0.4 },
|
|
"cool_fan_full_layer": { "value": 2 },
|
|
"cool_min_speed": { "value": 30 },
|
|
"gantry_height": { "value": "70" },
|
|
"infill_overlap": { "value": 0 },
|
|
"infill_sparse_density": { "value": 15 },
|
|
"layer_height": { "default_value": 0.15 },
|
|
"layer_height_0": { "default_value": 0.2 },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"machine_end_gcode": { "value": "'M104 S0 ;extruder heater off' + ('\\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning\\nM107 ; Fans off'" },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[-20, 20],
|
|
[-20, -20],
|
|
[18, 20],
|
|
[18, -18]
|
|
]
|
|
},
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\n;Put printing message on LCD screen\nM117 Printing..." },
|
|
"machine_use_extruder_offset_to_offset_coords": { "default_value": true },
|
|
"optimize_wall_printing_order": { "value": true },
|
|
"retraction_amount": { "default_value": 4 },
|
|
"retraction_count_max": { "default_value": 10 },
|
|
"retraction_enable": { "default_value": true },
|
|
"retraction_extrusion_window": { "value": 4 },
|
|
"retraction_hop": { "default_value": 0.2 },
|
|
"retraction_hop_enabled": { "value": true },
|
|
"retraction_min_travel": { "value": 5 },
|
|
"retraction_speed": { "default_value": 70 },
|
|
"speed_infill": { "value": 45 },
|
|
"speed_print": { "value": 45 },
|
|
"speed_topbottom": { "value": 40 },
|
|
"speed_travel": { "value": 75 },
|
|
"speed_wall": { "value": 35 },
|
|
"speed_wall_x": { "value": 40 },
|
|
"speed_z_hop": { "value": 2.5 },
|
|
"support_angle": { "default_value": 50 },
|
|
"support_brim_enable": { "value": true },
|
|
"support_enable": { "value": true },
|
|
"support_infill_angles":
|
|
{
|
|
"value": [
|
|
-45
|
|
]
|
|
},
|
|
"support_interface_density": { "value": 70 },
|
|
"support_interface_enable": { "value": true },
|
|
"support_interface_height": { "value": 0.5 },
|
|
"support_interface_pattern": { "default_value": "lines" },
|
|
"support_pattern": { "default_value": "lines" },
|
|
"support_xy_distance": { "value": 0.5 },
|
|
"support_z_distance": { "value": 0.3 },
|
|
"switch_extruder_retraction_amount": { "value": 6 },
|
|
"switch_extruder_retraction_speeds": { "value": 60 },
|
|
"top_bottom_thickness": { "value": 1.5 },
|
|
"wall_line_count": { "value": 3 },
|
|
"wall_thickness": { "value": 1.2 }
|
|
}
|
|
} |