mirror of
https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura
synced 2025-08-02 03:20:38 +08:00
37 lines
2.0 KiB
JSON
37 lines
2.0 KiB
JSON
{
|
|
"version": 2,
|
|
"name": "Z-Bolt Plus",
|
|
"inherits": "fdmprinter",
|
|
"metadata":
|
|
{
|
|
"visible": true,
|
|
"author": "Z-Bolt",
|
|
"manufacturer": "Z-Bolt Co.",
|
|
"file_formats": "text/x-gcode",
|
|
"platform": "z-bolt_plus_platform.3mf",
|
|
"machine_extruder_trains": { "0": "z-bolt_extruder_0" }
|
|
},
|
|
"overrides":
|
|
{
|
|
"gantry_height": { "value": "55" },
|
|
"machine_center_is_zero": { "default_value": false },
|
|
"machine_depth": { "default_value": 200 },
|
|
"machine_end_gcode": { "default_value": "'M104 S0 ;extruder heater off' + ('\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 Z0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning'" },
|
|
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
|
"machine_head_with_fans_polygon":
|
|
{
|
|
"default_value": [
|
|
[-75, 35],
|
|
[-75, -18],
|
|
[18, 35],
|
|
[18, -18]
|
|
]
|
|
},
|
|
"machine_heated_bed": { "default_value": true },
|
|
"machine_height": { "default_value": 335 },
|
|
"machine_name": { "default_value": "Z-Bolt Plus" },
|
|
"machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
|
|
"machine_use_extruder_offset_to_offset_coords": { "default_value": true },
|
|
"machine_width": { "default_value": 300 }
|
|
}
|
|
} |