fab2c31b4f
If for some reason the print sequence is set to one-at-a-time be default in the printer definition and the number of extruders of the printer is set to >=2, then the print_sequence won't show up in neither the quality changes nor the user changes, yet it will still have "one-at-a-time" as a value. In a such case, it will still need to be set to "all-at-once" in the user changes. This is a theoretical case, as it is very unlikely for a printer to have "one-at-a-time" set by default in its definition (.def.json) file and still be able to support more than one extruders. But it is a world full of possibilities out there, so you never know... CURA-7827
Cura
Ultimaker Cura is a state-of-the-art slicer application to prepare your 3D models for printing with a 3D printer. With hundreds of settings and hundreds of community-managed print profiles, Ultimaker Cura is sure to lead your next project to a success.
Logging Issues
For crashes and similar issues, please attach the following information:
- (On Windows) The log as produced by dxdiag (start -> run -> dxdiag -> save output)
- The Cura GUI log file, located at
%APPDATA%\cura\<Cura version>\cura.log(Windows), or usuallyC:\Users\\<your username>\AppData\Roaming\cura\<Cura version>\cura.log$USER/Library/Application Support/cura/<Cura version>/cura.log(OSX)$USER/.local/share/cura/<Cura version>/cura.log(Ubuntu/Linux)
If the Cura user interface still starts, you can also reach this directory from the application menu in Help -> Show settings folder
For additional support, you could also ask in the #cura channel on FreeNode IRC. For help with development, there is also the #cura-dev channel.
Dependencies
- Uranium Cura is built on top of the Uranium framework.
- CuraEngine This will be needed at runtime to perform the actual slicing.
- fdm_materials Required to load a printer that has swappable material profiles.
- PySerial Only required for USB printing support.
- python-zeroconf Only required to detect mDNS-enabled printers.
Build scripts
Please checkout cura-build for detailed building instructions.
Running from Source
Please check our Wiki page for details about running Cura from source.
Plugins
Please check our Wiki page for details about creating and using plugins.
Supported printers
Please check our Wiki page for guidelines about adding support for new machines.
Configuring Cura
Please check out Wiki page about configuration options for developers.
Translating Cura
Please check out Wiki page about how to translate Cura into other languages.
License
Cura is released under the terms of the LGPLv3 or higher. A copy of this license should be included with the software.