GitHub-Proxy/ESP3D
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/luc-github/ESP3D.git synced 2025-08-18 03:45:56 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
Luc 2015-04-16 21:56:49 +08:00
parent 46cdebc7b1
commit 03164cc061
1 changed files with 60 additions and 62 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@ -11,8 +11,7 @@ Have a front end to know what is wifi status or know what is the print status -
TBD TBD
##Hardware connection ##Hardware connection
--Use GPIO2 to ground to reset all settings in hard way - 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW - I did not found information on this --Use GPIO2 to ground to reset all settings in hard way - 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW - I did not found information on this. Currently boot take 10 sec - giving 8 seconds to connect GPIO2 to GND and do an hard recovery for settings
currently boot take 10 sec - giving 8 seconds to connect GPIO2 to GND and do an hard recovery for settings
--Use GPIO0 to ground to be in update mode --Use GPIO0 to ground to be in update mode
--Use a switch to reset/disable module --Use a switch to reset/disable module
--Use GPIO2 connected to a printer pin to interrupt the bridge loop if need change configuration --Use GPIO2 connected to a printer pin to interrupt the bridge loop if need change configuration
@ -51,7 +50,6 @@ Baud rate: 9600
From web: From web:
--Need picture and flow --Need picture and flow
... ...
TBD TBD
From serial: From serial: