GitHub-Proxy/ESP3D
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/luc-github/ESP3D.git synced 2025-08-18 21:26:02 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
Luc 2015-04-16 21:56:49 +08:00
parent 46cdebc7b1
commit 03164cc061
1 changed files with 60 additions and 62 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
README.md
View File

@ -11,12 +11,11 @@ Have a front end to know what is wifi status or know what is the print status -
TBD TBD
##Hardware connection ##Hardware connection
--Use GPIO2 to ground to reset all settings in hard way - 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW - I did not found information on this --Use GPIO2 to ground to reset all settings in hard way - 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW - I did not found information on this. Currently boot take 10 sec - giving 8 seconds to connect GPIO2 to GND and do an hard recovery for settings
currently boot take 10 sec - giving 8 seconds to connect GPIO2 to GND and do an hard recovery for settings --Use GPIO0 to ground to be in update mode
--Use GPIO0 to ground to be in update mode --Use a switch to reset/disable module
--Use a switch to reset/disable module --Use GPIO2 connected to a printer pin to interrupt the bridge loop if need change configuration
--Use GPIO2 connected to a printer pin to interrupt the bridge loop if need change configuration --TODO: Full wiring with drawing
--TODO: Full wiring with drawing
TBD TBD
##Development ##Development
@ -27,8 +26,8 @@ Full IDE from https://github.com/esp8266/Arduino can be used
##Flash the Module ##Flash the Module
*tools: *tools:
--Use IDE to upload directly --Use IDE to upload directly
--Use esp flasher: https://github.com/nodemcu/nodemcu-flasher for 0x00000 and 0X00004 binaries --Use esp flasher: https://github.com/nodemcu/nodemcu-flasher for 0x00000 and 0X00004 binaries
##Wifi connection ##Wifi connection
*Wifi Mode : Access point / Client station (not sure it is useful to handle AP/STA in same time as make configuration more complex, but use AP/STA only to help the configuration mode = be able to scan other AP/ test connection when in AP mode ) *Wifi Mode : Access point / Client station (not sure it is useful to handle AP/STA in same time as make configuration more complex, but use AP/STA only to help the configuration mode = be able to scan other AP/ test connection when in AP mode )
@ -51,7 +50,6 @@ Baud rate: 9600
From web: From web:
--Need picture and flow --Need picture and flow
... ...
TBD TBD
From serial: From serial: