GitHub-Proxy/ESP3D
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/luc-github/ESP3D.git synced 2025-07-25 09:24:26 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Update README.md

Browse Source 
missng space to emulate LF
This commit is contained in:
Luc 2015-04-17 23:16:14 +08:00
parent ef9e42ceb1
commit 3d4cf9a065
1 changed files with 3 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
README.md
View File

@ -14,7 +14,7 @@ TBD
--Use GPIO2 to ground to reset all settings in hard way - 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW - I did not found information on this. Currently boot take 10 sec - giving 8 seconds to connect GPIO2 to GND and do an hard recovery for settings
--Use GPIO0 to ground to be in update mode
--Use a switch to reset/disable module
<S>--Use GPIO2 connected to a printer pin to interrupt the bridge loop if need change configuration (may be not necessary if no performance impact of allowing ESP screening commands - TBT - TBC) </S> no need anymore
<S>--Use GPIO2 connected to a printer pin to interrupt the bridge loop if need change configuration (may be not necessary if no performance impact of allowing ESP screening commands - TBT - TBC) </S> no need anymore
--TODO: Full wiring with drawing
TBD
@ -38,7 +38,7 @@ Additionnaly:
*Wifi Mode : Access point / Client station (not sure it is useful to handle AP/STA in same time as make configuration more complex, but use AP/STA only to help the configuration mode = be able to scan other AP/ test connection when in AP mode )
*IP Generation: DHCP/Static IP
*IP/MASK/GATEWAY for static data
<S>*Usage: Bridge/Front End </S> no need anymore
<S>*Usage: Bridge/Front End </S> no need anymore
*Baud Rate for serial (supported : 9600, 19200, 38400, 57600, 115200, 230400)
...
TBD
@ -50,7 +50,7 @@ PW:12345678
IP: 192.168.0.1
Mask: 255.255.255.0
GW:192.168.0.1
<S>Bridge Mode </S> no need anymore
<S>Bridge Mode </S> no need anymore
Baud rate: 9600
From web: