GitHub-Proxy/ESP3D
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/luc-github/ESP3D.git synced 2025-08-05 15:00:42 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Use ESP3D Configurator format but display all options commented

Browse Source
This commit is contained in:
Luc 2022-06-22 15:31:17 +08:00
parent d7d75f31b1
commit 6c2d5bc37d
1 changed files with 508 additions and 285 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

793
esp3d/configuration.h
View File

@ -19,253 +19,539 @@
*/ */
#ifndef _CONFIGURATION_H #ifndef _CONFIGURATION_H
#define _CONFIGURATION_H #define _CONFIGURATION_H
/* Setup station as default, use AP mode first if not done
//FEATURES - comment to disable ////////////////////////////////////////////////////////// * Note: need both defined to enable it
* Uncomment and edit them to define
//WiFi setup station as default, use AP mode first if not done */
//Note: need both defined to enable it
//#define STATION_WIFI_SSID "*********" //#define STATION_WIFI_SSID "*********"
//#define STATION_WIFI_PASSWORD "*********" //#define STATION_WIFI_PASSWORD "*********"
//you can also use a different config file for SSID/password
//this file is ignored by github /* You can also use a different config file for SSID/password
* Just save it in same location as this configuration.h
* This file is ignored by github
*/
#if defined __has_include #if defined __has_include
# if __has_include ("myconfig.h") # if __has_include ("myconfig.h")
# include "myconfig.h" # include "myconfig.h"
# endif # endif
#endif #endif
//SERIAL_COMMAND_FEATURE: allow to send command by serial /************************************
#define SERIAL_COMMAND_FEATURE *
* Serial Communications
*
* Settings and protocols
*
************************************/
//COMMUNICATION_PROTOCOL: to communicate with printer or TFT /* Serial Communication protocol
//RAW_SERIAL standard serial * RAW_SERIAL // Basic serial protocol, without data change
//MKS_SERIAL Mks protocol * MKS_SERIAL // This is a MakerBase communication protocol, used with MKS printers and TFT, it encapsulated data in a custom protocol
#define COMMUNICATION_PROTOCOL RAW_SERIAL */
#define COMMUNICATION_PROTOCOL MKS_SERIAL
//AUTHENTICATION_FEATURE: protect pages by login password /* Serial port
//#define AUTHENTICATION_FEATURE * which serial ESP use to communicate to printer (ESP32 has 3 serials available, ESP8266 only 2)
* USE_SERIAL_0 //for ESP8266/32, also used by bootloader output, so consider to make it quiet
* USE_SERIAL_1 //for ESP8266/32
* USE_SERIAL_2 //for ESP32 Only
*/
#define ESP_SERIAL_OUTPUT USE_SERIAL_0
//WIFI_FEATURE : enable WIFI function /* Serial buffer size
* Maximum size of the serial buffer
*/
#define SERIAL_RX_BUFFER_SIZE 512
/************************************
*
* Target firmware
*
* Targeted firmware that ESP3D will communicate with
*
************************************/
/* Target firmware (default UNKNOWN_FW can be changed later in settings)
* UNKNOWN_FW
* GRBL
* MARLIN
* SMOOTHIEWARE
* REPETIER
*/
#define DEFAULT_FW UNKNOWN_FW
/************************************
*
* Radio mode of ESP3D
*
* The radio mode ESP3D communicate with the network
*
************************************/
/* Use WiFi
* Enable wifi communications
*/
#define WIFI_FEATURE #define WIFI_FEATURE
//ETH_FEATURE : enable Ethernet function /* Use Ethernet
* Enable ethernet communications
*/
//#define ETH_FEATURE //#define ETH_FEATURE
//BLUETOOTH_FEATURE : enable BT Serial function /* Use Bluetooth
* Enable serial bluetooth communications
*/
//#define BLUETOOTH_FEATURE //#define BLUETOOTH_FEATURE
//HTTP_FEATURE : enable HTTP function /************************************
*
* Channels of ESP3D
*
* The way ESP3D communicate
*
************************************/
/* Use Web server
* Enable http server
*/
#define HTTP_FEATURE #define HTTP_FEATURE
//TELNET_FEATURE : enable Telnet function /* Use telnet server
* Enable telnet light (raw tcp) communications
*/
#define TELNET_FEATURE #define TELNET_FEATURE
//WS_DATA_FEATURE: allow to connect serial from Websocket /* Use Websocket server
* Enable websocket communications
*/
//#define WS_DATA_FEATURE //#define WS_DATA_FEATURE
//DISPLAY_DEVICE: allow screen output // Enable notifications
//OLED_I2C_SSD1306_128X64 1 // Allows to send notifications to the user
//OLED_I2C_SSDSH1106_132X64 2
//TFT_SPI_ST7789_240X240 5
//TFT_SPI_ST7789_135X240 6
//#define DISPLAY_DEVICE TFT_SPI_ST7789_240X240
//#define DISPLAY_I2C_ADDR 0x3c
//#define DISPLAY_I2C_PIN_RST 16 //comment if not applicable
//#define DISPLAY_FLIP_VERTICALY 1
//#define DISPLAY_TOUCH_DRIVER XPT2046_SPI
//#define DISPLAY_LED_PIN 27 //-1 if none
//BUZZER_DEVICE: allow to connect passive buzzer
//#define BUZZER_DEVICE
//Printer has display and can show message using `M117 <Message>`
//#define PRINTER_HAS_DISPLAY
//INPUT_DEVICE: allow input
//ROTARY_ENCODER 1
//#define INPUT_DEVICE ROTARY_ENCODER
//SENSOR_DEVICE: send info based on defined sensor
//DHT11_DEVICE 1
//DHT22_DEVICE 2
//ANALOG_DEVICE 3
//BMP280_DEVICE 4
//BME280_DEVICE 5
//#define SENSOR_DEVICE BMP280_DEVICE
#ifdef BUZZER_DEVICE
#define ESP3D_BUZZER_PIN 15
#endif //BUZZER_DEVICE
#ifdef SENSOR_DEVICE
//pin
#define ESP3D_SENSOR_PIN 22
#define SENSOR_ADDR 0x76
//Conversion coefficient
#define SENSOR_CONVERTER(v) v*0.588
//Unit to use, if not applicaple for sensor will use default one
//it is used also for the output format
//C for Celsius / F for Fahrenheit / V for volt
#define SENSOR__UNIT "C"
#endif //SENSOR_DEVICE
//PIN_RESET_FEATURE : allow to reset settings by setting low a pin
//#define PIN_RESET_FEATURE
//#define ESP3D_RESET_PIN 0
//SD_DEVICE: to access SD Card files directly instead of access by serial using printer Board FW
//ESP_SD_NATIVE 1 //esp32 / esp8266
//ESP_SDIO 2 //esp32 only
//ESP_SDFAT 3 //esp8266 / esp32
//ESP_SDFAT2 4 //esp8266 / esp32
//#define SD_DEVICE ESP_SDFAT2
#if defined(SD_DEVICE)
//SDIO mode
//SD_ONE_BIT_MODE
//SD_FOUR_BIT_MODE
//#define SDIO_BIT_MODE SD_ONE_BIT_MODE
//SD Device Connection type (default is ESP_NO_SD if not defined)
//ESP_NO_SD
//ESP_DIRECT_SD
//ESP_SHARED_SD
#define SD_DEVICE_CONNECTION ESP_SHARED_SD
#if SD_DEVICE_CONNECTION == ESP_SHARED_SD
//Pin used by multiplexer or hardware switch to select SD device
#define ESP_FLAG_SHARED_SD_PIN 0
//value to enable SD device on ESP
#define ESP_FLAG_SHARED_SD_VALUE 0
#endif //SD_DEVICE_CONNECTION ESP_SHARED_SD
//pin if reader has insert detection feature
//let -1 or comment if none
#define ESP_SD_DETECT_PIN 4
//value expected for ESP_SD_DETECT_PIN (0 or 1)
#define ESP_SD_DETECT_VALUE 0
#define ESP_SD_CS_PIN 5
#endif //SD_DEVICE
//FILESYSTEM_FEATURE: to host some files on flash
//ESP_SPIFFS_FILESYSTEM 0
//ESP_FAT_FILESYSTEM 1
//ESP_LITTLEFS_FILESYSTEM 2
#define FILESYSTEM_FEATURE ESP_LITTLEFS_FILESYSTEM
//Allows to mount /FS and /SD under / for FTP server
//#define GLOBAL_FILESYSTEM_FEATURE
//WEBDAV_FEATURE : enable WebDav feature
//FS_ROOT mount all FS
//FS_FLASH mount Flash FS
//FS_SD mount SD FS
//FS_USBDISK mount USB disk FS
//#define WEBDAV_FEATURE FS_FLASH
//FTP_FEATURE : enable FTP feature
//FS_ROOT mount all FS
//FS_FLASH mount Flash FS
//FS_SD mount SD FS
//FS_USBDISK mount USB disk FS
//#define FTP_FEATURE FS_ROOT
//DIRECT_PIN_FEATURE: allow to access pin using ESP201 command
#define DIRECT_PIN_FEATURE
//TIMESTAMP_FEATURE: set time system
#define TIMESTAMP_FEATURE
//FILESYSTEM_TIMESTAMP_FEATURE: display last write time from Flash files
//#define FILESYSTEM_TIMESTAMP_FEATURE
//FILESYSTEM_TIMESTAMP_FEATURE:display last write time from SD files
#define SD_TIMESTAMP_FEATURE
//MDNS_FEATURE: this feature allow type the name defined
//in web browser by default: http:\\esp8266.local and connect
//need `bonjour` protocol on windows
#define MDNS_FEATURE
//SSDP_FEATURE: this feature is a discovery protocol, supported on Windows out of the box
#define SSDP_FEATURE
//CAPTIVE_PORTAL_FEATURE: In SoftAP redirect all unknow call to main page
#define CAPTIVE_PORTAL_FEATURE
//OTA_FEATURE: this feature is arduino update over the air
//#define OTA_FEATURE
//WEB_UPDATE_FEATURE: allow to flash fw using web UI
#define WEB_UPDATE_FEATURE
//SD_UPDATE_FEATURE: allow to flash/configure fw using SD
//#define SD_UPDATE_FEATURE
//NOTIFICATION_FEATURE : allow to push notifications
#define NOTIFICATION_FEATURE #define NOTIFICATION_FEATURE
//Notifications messages /* Notification message when online
* The message that will be sent when the ESP is online
*/
#define NOTIFICATION_ESP_ONLINE "Hi, %ESP_NAME% is now online at %ESP_IP%" #define NOTIFICATION_ESP_ONLINE "Hi, %ESP_NAME% is now online at %ESP_IP%"
/* Notification title message
* The title of notification
*/
#define ESP_NOTIFICATION_TITLE "ESP3D Notification" #define ESP_NOTIFICATION_TITLE "ESP3D Notification"
//CAMERA_DEVICE: Enable the support of connected camera (Only Camera with PSRAM are supported) /************************************
//CAMERA_MODEL_CUSTOM 0 //Edit the pins in include/pins.h *
//CAMERA_MODEL_ESP_EYE 1 * Discovery methods of ESP3D
//CAMERA_MODEL_M5STACK_PSRAM 2 *
//CAMERA_MODEL_M5STACK_V2_PSRAM 3 * The discovery methods of ESP3D
//CAMERA_MODEL_M5STACK_WIDE 4 *
//CAMERA_MODEL_AI_THINKER 7 e.g. used by ESP32-CAM ************************************/
//CAMERA_MODEL_WROVER_KIT 8
//CAMERA_MODEL_ESP32_CAM_BOARD 10 /* Use captive portal
//CAMERA_MODEL_ESP32S2_CAM_BOARD 11 * Enable captive portal in AP mode
//CAMERA_MODEL_ESP32S3_CAM_LCD 12 */
//CAMERA_MODEL_ESP32S3_EYE 13 #define CAPTIVE_PORTAL_FEATURE
/* Use mDNS discovery
* This method need `bonjour` protocol on windows, or `avahi` on linux
*/
#define MDNS_FEATURE
/* Use Simple Service Discovery Protocol
* It is supported on Windows out of the box
*/
#define SSDP_FEATURE
/************************************
*
* SSDP Customization settings
*
* Customize your ESP3D
*
************************************/
/* Model name
* Modele name of device
*/
#define ESP_MODEL_NAME "ESP Board"
/* Model number
* Modele number of device
*/
#define ESP_MODEL_NUMBER "ESP3D 3.0"
/* Model url
* Modele url of device
*/
#define ESP_MODEL_URL "https://www.espressif.com/en/products/devkits"
/* Manufacturer name
* Manufacturer name of device
*/
#define ESP_MANUFACTURER_NAME "Espressif Systems"
/* Manufacturer url
* Manufacturer url of device
*/
#define ESP_MANUFACTURER_URL "https://www.espressif.com"
/************************************
*
* Flash filesystem
*
* Filesystem on flash
*
************************************/
/* File system type used by ESP3D
* Type of file system used by ESP3D to store files
* ESP_SPIFFS_FILESYSTEM (Deprecated)
* ESP_FAT_FILESYSTEM (ESP32 only with large partitions)
* ESP_LITTLEFS_FILESYSTEM (Default)
*/
#define FILESYSTEM_FEATURE ESP_LITTLEFS_FILESYSTEM
/* Enable date/time on files
* Set date/time on files using SNTP or last webui connection
*/
//#define FILESYSTEM_TIMESTAMP_FEATURE
/************************************
*
* SD filesystem
*
* Filesystem on SD card
*
************************************/
/* SD card connection
* ESP_NO_SD //(default)
* ESP_DIRECT_SD //Only your ESP board is connected to SDCard
* ESP_SHARED_SD //Printer SD Card is also connected to ESP3D
* Does your system has SD card and how it is connected to your ESP3D
*/
#define SD_DEVICE_CONNECTION ESP_DIRECT_SD
/* SD card library
* ESP_SD_NATIVE //esp32 / esp8266
* ESP_SDIO //esp32 only
* ESP_SDFAT //esp8266 / esp32
* ESP_SDFAT2 //esp8266 / esp32
*/
#define SD_DEVICE ESP_SDFAT2
/* Sdio bit mode
* Mode used by SDIO library 1 bit / 4bits
* SD_ONE_BIT_MODE
* SD_FOUR_BIT_MODE
*/
//#define SDIO_BIT_MODE SD_ONE_BIT_MODE
/* Enable date/time on files
* Set date/time on files using SNTP or last webui connection
*/
//#define SD_TIMESTAMP_FEATURE
/************************************
*
* SD card pins
*
************************************/
/* SD card detect pin
* The pin used to detect SD card
*/
//#define ESP_DETECT_PIN 4
/* SD card detect pin value
* State of SD card detect pin when card is present
*/
//#define ESP_SD_DETECT_VALUE 0
/* SD shared flag pin
* The pin used to enable SD card for ESP board
*/
//#define ESP_FLAG_SHARED_SD_PIN -1
/* SD shared flag pin value
* State of SD card shared pin for ESP board
*/
//#define ESP_FLAG_SHARED_SD_VALUE 0
/* SD card CS pin
* The pin used to select SD card in SPI mode
*/
//#define ESP_SD_CS_PIN 5
/************************************
*
* Remote access
*
* Remote filesystem access
*
************************************/
/* Enable global filesystem
* Allows to access to all filesystems from same location
*/
//#define GLOBAL_FILESYSTEM_FEATURE
/* WebDav access
* Use WebDav to access to your filesystem
* FS_ROOT //mount all FS, need GLOBAL_FILESYSTEM_FEATURE
* FS_FLASH //mount Flash FS
* FS_SD mount SD FS
*/
//#define WEBDAV_FEATURE FS_ROOT
/* FTP access
* Use FTP to access to your filesystem (1 connection only)
* FS_ROOT //mount all FS, need GLOBAL_FILESYSTEM_FEATURE
* FS_FLASH //mount Flash FS
* FS_SD //mount SD FS
*/
//#define FTP_FEATURE FS_ROOT
/************************************
*
* Reset ESP3D
*
* Reset ESP3D settings
*
************************************/
/* Enable pin reset feature
* Use a pin to reset ESP3D settings
*/
#define PIN_RESET_FEATURE
/* Reset pin
* The pin used to reset ESP3D setting if set to low for more than 1 second at start
*/
#define ESP3D_RESET_PIN 0
/************************************
*
* Update ESP3D
*
* Update ESP3D firmware
*
************************************/
/* Enable OTA
* Over The Air Update (OTA)
*/
//#define OTA_FEATURE
/* Enable Web Update
* Update firmware using WebUI, need 4MB of flash
*/
#define WEB_UPDATE_FEATURE
/* Enable SD card Update
* Update firmware and settings using file on SDCard
*/
//#define SD_UPDATE_FEATURE
/************************************
*
* Display settings
*
* Rendering screens
*
************************************/
/* Printer screen
* If your printer has a display
*/
#define PRINTER_HAS_DISPLAY
/* ESP3D screen
* Screen connected to ESP board
* OLED I2C SSD1306 128X64
* OLED_I2C_SSDSH1106_132X64
* TFT_SPI_ST7789_240X240
* TFT_SPI_ST7789_135X240
*/
//#define DISPLAY_DEVICE OLED_I2C_SSD1306_128X64
/* Flip screen
* Flip/rotate screen
*/
//#define DISPLAY_FLIP_VERTICALY
/* Display i2C address
* Wire address of display
*/
//#define DISPLAY_I2C_ADDR 0x3c
/* Display reset pin
* The pin used to reset the screen (optional)
*/
//#define DISPLAY_I2C_PIN_RST 22
/* TFT led pin
* The pin used for the backlight
*
//#define DISPLAY_LED_PIN -1
/************************************
*
* Audio settings
*
* Buzzer feature
*
************************************/
/* Enable buzzer
* Your esp board has a passive buzzer
*/
//#define BUZZER_DEVICE
/* Buzzer pin
* The pin used for the passive buzzer
*/
#define ESP3D_BUZZER_PIN 33
/************************************
*
* Sensor settings
*
* Sensor feature
*
************************************/
/* Sensor pin
* The pin used for the sensor
*/
#define ESP3D_SENSOR_PIN 34
/* Sensor Unit
* Unit of the sensor result
*/
#define SENSOR__UNIT "C"
/************************************
*
* Camera settings
*
* Connected camera
*
************************************/
/* Camera type
* CAMERA_MODEL_CUSTOM //Edit the pins in include/pins.h
* CAMERA_MODEL_ESP_EYE
* CAMERA_MODEL_M5STACK_PSRAM
* CAMERA_MODEL_M5STACK_V2_PSRAM
* CAMERA_MODEL_M5STACK_WIDE
* CAMERA_MODEL_AI_THINKER //ESP32-CAM
* CAMERA_MODEL_WROVER_KIT
* CAMERA_MODEL_ESP32_CAM_BOARD
* CAMERA_MODEL_ESP32S2_CAM_BOARD
* CAMERA_MODEL_ESP32S3_CAM_LCD
* CAMERA_MODEL_ESP32S3_EYE
* Camera connected to ESP board, only ones with PSRAM are supported
*/
//#define CAMERA_DEVICE CAMERA_MODEL_AI_THINKER //#define CAMERA_DEVICE CAMERA_MODEL_AI_THINKER
//#define USE_BOARD_HEADER 1 //CAMERA_MODEL_ESP32_CAM_BOARD /CAMERA_MODEL_ESP32S2_CAM_BOARD /* Flip vertically
//#define CAMERA_DEVICE_FLIP_VERTICALY //comment to disable * Flip camera vertically
//#define CAMERA_DEVICE_FLIP_HORIZONTALY//comment to disable */
//#define CUSTOM_CAMERA_NAME "ESP32-CAM" //#define CAMERA_DEVICE_FLIP_VERTICALY
//Allow remote access by enabling cross origin access /************************************
//check https://developer.mozilla.org/en-US/docs/Web/HTTP/CORS *
//this should be enabled only in specific cases * Levels of security
//like show the camera in web page different than device web server *
//if you do not know what is that then better left it commented * How commands are allowed to be sent to ESP3D
*
************************************/
/* Enable serial commands
* Allow commands to be sent to ESP3D via serial port
*/
#define SERIAL_COMMAND_FEATURE
/* Allow remote access by enabling cross origin access
* check https://developer.mozilla.org/en-US/docs/Web/HTTP/CORS
* this should be enabled only in specific cases
* like show the camera in web page different than device web server
* /if you do not know what is that then better left it commented
* Allow to show the camera in web page different than device web server
*/
//#define ESP_ACCESS_CONTROL_ALLOW_ORIGIN //#define ESP_ACCESS_CONTROL_ALLOW_ORIGIN
//GCODE_HOST_FEATURE : allow to send GCODE with ack /* Enable authentication
#define GCODE_HOST_FEATURE * Force usage of authentication for commands
*/
//#define AUTHENTICATION_FEATURE
//ESP_AUTOSTART_SCRIPT : to do some actions / send GCODE at start, need ESP_GCODE_HOST_FEATURE enabled /************************************
//can be a line od several GCODES separated by `\n` e.g. "M21\nM117 SD mounted\n" *
//can be a file name, if exists, commands inside will be processed, e.g "/FS:/autostart.esp" * Additional features
*
* Extra settings
*
************************************/
/* Enable direct control pin
* Controls pins using [ESP201]
*
#define DIRECT_PIN_FEATURE
/************************************
*
* Scripting settings
*
* Scripting on ESP3D
*
************************************/
/* Enable Autostart
* Commands to run on startup
* Separate commands with ';' or use file
*/
//#define ESP_AUTOSTART_SCRIPT "M117 Mounting SD;M21" //#define ESP_AUTOSTART_SCRIPT "M117 Mounting SD;M21"
//#define ESP_AUTOSTART_SCRIPT_FILE "autoscript.gco" //#define ESP_AUTOSTART_SCRIPT_FILE "autoscript.gco"
//ESP_LUA_INTERPRETER_FEATURE : add lua scripting feature /* Enable lua interpreter
* Allow to use lua interpreter on ESP3D
*/
//#define ESP_LUA_INTERPRETER_FEATURE //#define ESP_LUA_INTERPRETER_FEATURE
//Extra features ///////////////////////////////////////////////////////////////////////// /* Gcode Host Feature
* This feature allows to process Gcode files like macros.
*/
#define GCODE_HOST_FEATURE
/* Settings location
* SETTINGS_IN_EEPROM //ESP8266/ESP32
* SETTINGS_IN_PREFERENCES //ESP32 only
* Location where ESP3D will save settings
*/
#define ESP_SAVE_SETTINGS SETTINGS_IN_EEPROM
/* Add serial task
* ESP32 need to add a task to handle serial communication
*/
#define SERIAL_INDEPENDANT_TASK
/************************************ /************************************
* *
* DEBUG * Development setting
* * Do not modify them for production
* **********************************/ ************************************/
//Enable debug mode
//Do not do this when connected to printer !!! //Do not do this when connected to printer !!!
//be noted all upload may failed if enabled //be noted all upload may failed if enabled
//DEBUG_OUTPUT_SERIAL0 1 //DEBUG_OUTPUT_SERIAL0
//DEBUG_OUTPUT_SERIAL1 2 //DEBUG_OUTPUT_SERIAL1
//DEBUG_OUTPUT_SERIAL2 3 //DEBUG_OUTPUT_SERIAL2
//DEBUG_OUTPUT_TELNET 4 //DEBUG_OUTPUT_TELNET
//DEBUG_OUTPUT_WEBSOCKET 5 //DEBUG_OUTPUT_WEBSOCKET
//#define ESP_DEBUG_FEATURE DEBUG_OUTPUT_SERIAL0 //#define ESP_DEBUG_FEATURE DEBUG_OUTPUT_SERIAL0
#ifdef ESP_DEBUG_FEATURE #ifdef ESP_DEBUG_FEATURE
@ -273,86 +559,32 @@
#define DEBUG_ESP3D_OUTPUT_PORT 8000 #define DEBUG_ESP3D_OUTPUT_PORT 8000
#endif //ESP_DEBUG_FEATURE #endif //ESP_DEBUG_FEATURE
/************************************ //Enable benchmark report in dev console
*
* Serial Communications
*
* **********************************/
//which serial ESP use to communicate to printer (ESP32 has 3 serials available, ESP8266 only 2)
//USE_SERIAL_0 for ESP8266/32
//USE_SERIAL_1 for ESP8266/32
//USE_SERIAL_2 for ESP32 Only
#define ESP_SERIAL_OUTPUT USE_SERIAL_0
//Serial rx buffer size is 256 but can be extended
#define SERIAL_RX_BUFFER_SIZE 512
/************************************
*
* Benchmark report
*
* **********************************/
//#define ESP_BENCHMARK_FEATURE //#define ESP_BENCHMARK_FEATURE
//Serial need speed up on esp32 //Disable sanity check at compilation
#define SERIAL_INDEPENDANT_TASK
/************************************
*
* Settings
*
* **********************************/
//SETTINGS_IN_EEPROM 0
//SETTINGS_IN_PREFERENCES 1
#define ESP_SAVE_SETTINGS SETTINGS_IN_EEPROM
/************************************
*
* SSL Client
*
* **********************************/
//Using BearSSL need to decrease size of packet to not be OOM on ESP8266
#define BEARSSL_MFLN_SIZE 512
#define BEARSSL_MFLN_SIZE_FALLBACK 4096
/************************************
*
* Disable sanity check
*
* **********************************/
//#define ESP_NO_SANITY_CHECK //#define ESP_NO_SANITY_CHECK
/************************************
*
* Target Firmware (default is UNKNOWN_FW)
*
* **********************************/
//UNKNOWN_FW 0
//GRBL 10
//MARLIN 20
//SMOOTHIEWARE 40
//REPETIER 50
///REPRAP 70
//#define DEFAULT_FW UNKNOWN_FW
/************************************ /************************************
* *
* Customize ESP3D * Sanity checks
* * Do not modify
* **********************************/ ************************************/
#if defined( ARDUINO_ARCH_ESP8266)
#define ESP_MODEL_NAME "ESP8266"
#endif //ARDUINO_ARCH_ESP8266
#if defined( ARDUINO_ARCH_ESP32)
#define ESP_MODEL_NAME "ESP32"
#endif //ARDUINO_ARCH_ESP32
#define ESP_MODEL_URL "https://www.espressif.com/en/products"
#define ESP_MODEL_NUMBER "ESP3D 3.0"
#define ESP_MANUFACTURER_NAME "Espressif Systems"
#define ESP_MANUFACTURER_URL "http://espressif.com"
#if defined (SD_TIMESTAMP_FEATURE) || defined (FILESYSTEM_TIMESTAMP_FEATURE)
#define TIMESTAMP_FEATURE
#endif //SD_TIMESTAMP_FEATURE || FILESYSTEM_TIMESTAMP_FEATURE
#if defined(PRINTER_HAS_DISPLAY)
#define HAS_SERIAL_DISPLAY ""
#endif // PRINTER_HAS_DISPLAY
#if defined(CAMERA_DEVICE)
#if CAMERA_DEVICE==CAMERA_MODEL_ESP32_CAM_BOARD || CAMERA_DEVICE==CAMERA_MODEL_ESP32S2_CAM_BOARD
#define USE_BOARD_HEARDER 1
#endif // CAMERA_DEVICE==CAMERA_MODEL_ESP32_CAM_BOARD || CAMERA_DEVICE==CAMERA_MODEL_ESP32S2_CAM_BOARD
#endif // CAMERA_DEVICE
#if !defined(WIFI_FEATURE) && !defined(ETH_FEATURE) #if !defined(WIFI_FEATURE) && !defined(ETH_FEATURE)
#undef HTTP_FEATURE #undef HTTP_FEATURE
@ -366,13 +598,4 @@
#undef NOTIFICATION_FEATURE #undef NOTIFICATION_FEATURE
#endif #endif
/************************************
*
* Printer display (M117 support)
*
* **********************************/
#if defined(PRINTER_HAS_DISPLAY)
#define HAS_SERIAL_DISPLAY ""
#endif //PRINTER_HAS_DISPLAY
#endif //_CONFIGURATION_H #endif //_CONFIGURATION_H