From ac52b330d477c3903ff71866a939500309b7c129 Mon Sep 17 00:00:00 2001 From: Luc Date: Fri, 12 Jun 2015 13:50:09 +0800 Subject: [PATCH] Update README.md --- README.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/README.md b/README.md index 584d06fa..3a8e264a 100644 --- a/README.md +++ b/README.md @@ -9,7 +9,8 @@ Thanks to @lkarlslund for suggestion about independant reset using GPIO2 Have a bridge configurable by web (implemented) and optionally by printer (not yet implemented) Have a front end to know what is the wifi status (implemented) or know what is the print status (not yet implemented) - this part can be optional and removed by compilation directive if no need - + +Should be compatible with reprap printer (Marlin FW/Repetier FW) ##Hardware connection --Use GPIO2 to ground to reset all settings in hard way - 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW - I did not found information on this. Currently boot take 10 sec - giving 8 seconds to connect GPIO2 to GND and do an hard recovery for settings