From c87b63b44fbd26c1730cd0cedfd91177a6e0391a Mon Sep 17 00:00:00 2001
From: Luc <8822552+luc-github@users.noreply.github.com>
Date: Mon, 12 Dec 2022 19:00:50 +0800
Subject: [PATCH] Update hardware-connection.md

Signed-off-by: Luc <8822552+luc-github@users.noreply.github.com>
---
 wiki/hardware-connection.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/wiki/hardware-connection.md b/wiki/hardware-connection.md
index 7c633414..7ada1b92 100644
--- a/wiki/hardware-connection.md
+++ b/wiki/hardware-connection.md
@@ -114,7 +114,7 @@ To connect the ESP12e to the UART0. (Credits:<https://www.lesimprimantes3d.fr/fo
 5V (buck to 3.3v if directly connect to ESP - most development ESP boards already have this voltage limited built-in - but check!) and GND can be taken from the AUX3 exposed connector.  
 UART0 is normally used by USB port so don't use both together - so this hack piggybacks on that same port at UART level.  
 
-<img src='https://raw.githubusercontent.com/wiki/luc-github/ESP3D/images/Trigorilla/board.jpg' width='200'><br>
+<a href="https://raw.githubusercontent.com/wiki/luc-github/ESP3D/images/Trigorilla/board.jpg" target="_blank"><img src='https://raw.githubusercontent.com/wiki/luc-github/ESP3D/images/Trigorilla/board.jpg' width='200'></a><br>
 click to enlarge
 
 <img src='https://raw.githubusercontent.com/wiki/luc-github/ESP3D/images/Trigorilla/nodemcu.jpg' width='200'><br>