GitHub-Proxy/ESP3D
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/luc-github/ESP3D.git synced 2025-08-15 14:15:54 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Update Web/Data interface as now 2 port can be listened

Browse Source 
Web config/front end use port 80
Data interface use port 8888
This commit is contained in:
Luc 2015-04-17 23:14:45 +08:00
parent 5b9f3835b9
commit ef9e42ceb1
1 changed files with 9 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
README.md
View File

@ -14,7 +14,7 @@ TBD
--Use GPIO2 to ground to reset all settings in hard way - 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW - I did not found information on this. Currently boot take 10 sec - giving 8 seconds to connect GPIO2 to GND and do an hard recovery for settings --Use GPIO2 to ground to reset all settings in hard way - 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW - I did not found information on this. Currently boot take 10 sec - giving 8 seconds to connect GPIO2 to GND and do an hard recovery for settings
--Use GPIO0 to ground to be in update mode --Use GPIO0 to ground to be in update mode
--Use a switch to reset/disable module --Use a switch to reset/disable module
--Use GPIO2 connected to a printer pin to interrupt the bridge loop if need change configuration (may be not necessary if no performance impact of allowing ESP screening commands - TBT - TBC) <S>--Use GPIO2 connected to a printer pin to interrupt the bridge loop if need change configuration (may be not necessary if no performance impact of allowing ESP screening commands - TBT - TBC) </S> no need anymore
--TODO: Full wiring with drawing --TODO: Full wiring with drawing
TBD TBD
@ -38,7 +38,7 @@ Additionnaly:
*Wifi Mode : Access point / Client station (not sure it is useful to handle AP/STA in same time as make configuration more complex, but use AP/STA only to help the configuration mode = be able to scan other AP/ test connection when in AP mode ) *Wifi Mode : Access point / Client station (not sure it is useful to handle AP/STA in same time as make configuration more complex, but use AP/STA only to help the configuration mode = be able to scan other AP/ test connection when in AP mode )
*IP Generation: DHCP/Static IP *IP Generation: DHCP/Static IP
*IP/MASK/GATEWAY for static data *IP/MASK/GATEWAY for static data
*Usage: Bridge/Front End <S>*Usage: Bridge/Front End </S> no need anymore
*Baud Rate for serial (supported : 9600, 19200, 38400, 57600, 115200, 230400) *Baud Rate for serial (supported : 9600, 19200, 38400, 57600, 115200, 230400)
... ...
TBD TBD
@ -50,14 +50,16 @@ PW:12345678
IP: 192.168.0.1 IP: 192.168.0.1
Mask: 255.255.255.0 Mask: 255.255.255.0
GW:192.168.0.1 GW:192.168.0.1
Bridge Mode <S>Bridge Mode </S> no need anymore
Baud rate: 9600 Baud rate: 9600
From web: From web:
port 80
--Need picture and flow --Need picture and flow
... ...
TBD TBD
##Commands from/to serial: ##Commands from/to serial:
*from module to printer [Need Printer FW support and can be disabled in ESP FW] *from module to printer [Need Printer FW support and can be disabled in ESP FW]
-M800 S1 , restart module done need a wifi/activity restart -M800 S1 , restart module done need a wifi/activity restart
@ -67,7 +69,7 @@ TBD
... ...
TBD TBD
*from host to printer [Need Printer FW support] *from host to printer [Need Printer FW support] on port 8888
-M803 [IP, AP,SSID, Password....], ]Module configuration settings to be used by module -M803 [IP, AP,SSID, Password....], ]Module configuration settings to be used by module
-M805 query to get M804 informations -M805 query to get M804 informations
... ...
@ -80,7 +82,7 @@ TBD
... ...
TBD TBD
##Front End [need Printer FW support it] ##Front End [need Printer FW support it] or just display module status
--Display printer status --Display printer status
--Display temperatures --Display temperatures
--Display print progress if any --Display print progress if any
@ -88,7 +90,8 @@ TBD
--Launch/Stop/(Pause?) a Print --Launch/Stop/(Pause?) a Print
##TODO ##TODO
-- Define Front End Functions -- Define Front End Functions
-- do the bridge serial/TCPIP
-- do coding -- do coding
-- do testing -- do testing
-- do a complete drawing for connections -- do a complete drawing for connections