GitHub-Proxy/ESP3D
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/luc-github/ESP3D.git synced 2025-08-15 01:15:56 +08:00
Code Issues Actions Packages Projects Releases Wiki Activity

Add wires diagram

Browse Source 
add diagram and update readme
This commit is contained in:
luc 2015-07-12 21:15:57 +08:00
parent 5cd45b2976
commit f12d7d9abb
2 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@ -16,7 +16,7 @@ Should be compatible with reprap printer (Marlin FW/Repetier FW)
--Use GPIO2 to ground to reset all settings in hard way - 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW - I did not found information on this. Currently boot take 10 sec - giving 8 seconds to connect GPIO2 to GND and do an hard recovery for settings --Use GPIO2 to ground to reset all settings in hard way - 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW - I did not found information on this. Currently boot take 10 sec - giving 8 seconds to connect GPIO2 to GND and do an hard recovery for settings
--Use GPIO0 to ground to be in update mode --Use GPIO0 to ground to be in update mode
--Use a switch to reset/disable module --Use a switch to reset/disable module
--TODO: Full wiring with drawing <img src=https://raw.githubusercontent.com/luc-github/ESP8266/master/Wires.png><br>
##Development ##Development

BIN
Wires.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 91 KiB