/* config.h - ESP3D configuration file Copyright (c) 2014 Luc Lebosse. All rights reserved. This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef _CONFIGURATION_H #define _CONFIGURATION_H //FEATURES - comment to disable ////////////////////////////////////////////////////////// //SERIAL_COMMAND_FEATURE: allow to send command by serial #define SERIAL_COMMAND_FEATURE //AUTHENTICATION_FEATURE: protect pages by login password //#define AUTHENTICATION_FEATURE //WIFI_FEATURE : enable WIFI function #define WIFI_FEATURE //ETH_FEATURE : enable Ethernet function #define ETH_FEATURE //BLUETOOTH_FEATURE : enable BT Serial function #define BLUETOOTH_FEATURE //HTTP_FEATURE : enable HTTP function #define HTTP_FEATURE //TELNET_FEATURE : enable Telnet function #define TELNET_FEATURE //WS_DATA_FEATURE: allow to connect serial from Websocket #define WS_DATA_FEATURE //DISPLAY_DEVICE: allow screen output //OLED_I2C_SSD1306 1 //OLED_I2C_SSDSH1106 2 //TFT_SPI_ILI9341_320X240 3 //TFT_SPI_ILI9488_480X320 4 #define DISPLAY_DEVICE TFT_SPI_ILI9488_480X320 //UI_TYPE_BASIC 1 //UI_TYPE_ADVANCED 2 #define DISPLAY_UI_TYPE UI_TYPE_ADVANCED //UI_COLORED 1 //UI_MONOCHROME 2 #define DISPLAY_UI_COLOR UI_COLORED //BUZZER_DEVICE: allow to connect passive buzzer #define BUZZER_DEVICE #if defined (DISPLAY_DEVICE) //for ILI9143 edit User_Setup.h of TFT_eSPI library #if (DISPLAY_DEVICE == OLED_I2C_SSD1306) || (DISPLAY_DEVICE == OLED_I2C_SSDSH1106) #define DISPLAY_I2C_PIN_SDA 4 #define DISPLAY_I2C_PIN_SCL 15 #define DISPLAY_I2C_PIN_RST 16 //comment if not applicable #define DISPLAY_I2C_ADDR 0x3c #endif //(DISPLAY_DEVICE == OLED_I2C_SSD1306) || (DISPLAY_DEVICE == OLED_I2C_SSDSH1106) #define DISPLAY_FLIP_VERTICALY 1 //comment to disable #if (DISPLAY_DEVICE == TFT_SPI_ILI9341_320X240) || (DISPLAY_DEVICE == TFT_SPI_ILI9488_480X320) #define DISPLAY_TOUCH_DRIVER XPT2046_SPI #define DISPLAY_LED_PIN 33 //-1 if none #endif //(DISPLAY_DEVICE == TFT_SPI_ILI9341_320X240) || (DISPLAY_DEVICE == TFT_SPI_ILI9488_480X320) #endif //DISPLAY_DEVICE //INPUT_DEVICE: allow input //ROTARY_ENCODER 1 //#define INPUT_DEVICE ROTARY_ENCODER //DHT_DEVICE: send update of temperature / humidity based on DHT 11/22 //#define DHT_DEVICE #ifdef BUZZER_DEVICE #define ESP3D_BUZZER_PIN 15 #endif //BUZZER_DEVICE #ifdef DHT_DEVICE #define ESP3D_DHT_PIN 22 //USE_CELSIUS //USE_FAHRENHEIT #define DHT_UNIT USE_CELSIUS #endif //DHT_DEVICE //PIN_RESET_FEATURE : allow to reset settings by setting low a pin //#define PIN_RESET_FEATURE #if defined (PIN_RESET_FEATURE) #define ESP3D_RESET_PIN 2 #endif //PIN_RESET_FEATURE //SDCARD_FEATURE: to access SD Card files directly instead of access by serial using printer Board FW //#define SDCARD_FEATURE //FILESYSTEM_FEATURE: to host some files on flash //ESP_SPIFFS_FILESYSTEM 0 //ESP_FAT_FILESYSTEM 1 //ESP_LITTLEFS_FILESYSTEM 2 //Not Yet implemented #define FILESYSTEM_FEATURE ESP_FAT_FILESYSTEM //DIRECT_PIN_FEATURE: allow to access pin using ESP201 command #define DIRECT_PIN_FEATURE //TIMESTAMP_FEATURE: set time system //#define TIMESTAMP_FEATURE //FILESYSTEM_TIMESTAMP_FEATURE: allow to get last write time from FILESYSTEM files //#define FILESYSTEM_TIMESTAMP_FEATURE //MDNS_FEATURE: this feature allow type the name defined //in web browser by default: http:\\esp8266.local and connect //need `bonjour` protocol on windows #define MDNS_FEATURE //SSDP_FEATURE: this feature is a discovery protocol, supported on Windows out of the box #define SSDP_FEATURE //CAPTIVE_PORTAL_FEATURE: In SoftAP redirect all unknow call to main page #define CAPTIVE_PORTAL_FEATURE //OTA_FEATURE: this feature is arduino update over the air #define OTA_FEATURE //WEB_UPDATE_FEATURE: allow to flash fw using web UI #define WEB_UPDATE_FEATURE //NOTIFICATION_FEATURE : allow to push notifications #define NOTIFICATION_FEATURE //Extra features ///////////////////////////////////////////////////////////////////////// /************************************ * * DEBUG * * **********************************/ //Do not do this when connected to printer !!! //be noted all upload may failed if enabled //DEBUG_OUTPUT_SERIAL0 1 //DEBUG_OUTPUT_SERIAL1 2 //DEBUG_OUTPUT_SERIAL2 3 //DEBUG_OUTPUT_TELNET 4 //DEBUG_OUTPUT_WEBSOCKET 5 //#define ESP_DEBUG_FEATURE DEBUG_OUTPUT_SERIAL0 #ifdef ESP_DEBUG_FEATURE #define DEBUG_ESP3D_OUTPUT_PORT 8000 #endif //ESP_DEBUG_FEATURE /************************************ * * Serial Communications * * **********************************/ //which serial ESP use to communicate to printer (ESP32 has 3 serials available, ESP8266 only 2) //USE_SERIAL_0 for ESP8266/32 //USE_SERIAL_1 for ESP8266/32 //USE_SERIAL_2 for ESP32 Only #define ESP_SERIAL_OUTPUT USE_SERIAL_0 //Serial rx buffer size is 256 but can be extended #define SERIAL_RX_BUFFER_SIZE 512 //Serial Parameters #define ESP_SERIAL_PARAM SERIAL_8N1 //Serial Pins //-1 means use default pins of your board what ever the serial you choose // * UART 0 possible options are (1, 3), (2, 3) or (15, 13) // * UART 1 allows only TX on 2 if UART 0 is not (2, 3) #define ESP_RX_PIN -1 #define ESP_TX_PIN -1 /************************************ * * Settings * * **********************************/ //SETTINGS_IN_EEPROM 0 //SETTINGS_IN_PREFERENCES 1 #define ESP_SAVE_SETTINGS SETTINGS_IN_EEPROM /************************************ * * Customize ESP3D * * **********************************/ #if defined( ARDUINO_ARCH_ESP8266) #define ESP_MODEL_NAME "ESP8266" #define ESP_MODEL_URL "http://espressif.com/en/products/esp8266/" #endif //ARDUINO_ARCH_ESP8266 #if defined( ARDUINO_ARCH_ESP32) #define ESP_MODEL_NAME "ESP32" #define ESP_MODEL_URL "https://www.espressif.com/en/products/hardware/esp-wroom-32/overview" #endif //ARDUINO_ARCH_ESP32 #define ESP_MODEL_NUMBER "ESP3D 3.0" #define ESP_MANUFACTURER_NAME "Espressif Systems" #define ESP_MANUFACTURER_URL "http://espressif.com" #endif //_CONFIGURATION_H