/*
  CONFIG.H - esp8266 configuration class

  Copyright (c) 2014 Luc Lebosse. All rights reserved.

  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
  License as published by the Free Software Foundation; either
  version 2.1 of the License, or (at your option) any later version.

  This library is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public
  License along with this library; if not, write to the Free Software
  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
*/

//comment to disable
//MDNS_FEATURE: this feature allow  type the name defined
//in web browser by default: http:\\esp8266.local and connect
#define MDNS_FEATURE

//SSDD_FEATURE: this feature is a discovery protocol, supported on Windows out of the box
#define SSDP_FEATURE

//CAPTIVE_PORTAL_FEATURE: In SoftAP redirect all unknow call to main page
#define CAPTIVE_PORTAL_FEATURE

//AUTHENTICATION_FEATURE: protect pages by login password
#define AUTHENTICATION_FEATURE

//WEB_UPDATE_FEATURE: allow to flash fw using web UI
#define WEB_UPDATE_FEATURE

//SERIAL_COMMAND_FEATURE: allow to send command by serial
#define SERIAL_COMMAND_FEATURE

#ifndef CONFIG_h
#define CONFIG_h

#include <Arduino.h>
#include "wifi.h"
extern "C" {
#include "user_interface.h"
}
//version and sources location
#define FW_VERSION "0.5.1"
#define REPOSITORY "https://github.com/luc-github/ESP8266"


//pin used to reset setting
#define RESET_CONFIG_PIN 2

//flags
#define AP_MODE			1
#define CLIENT_MODE		2
#define DHCP_MODE		1
#define STATIC_IP_MODE		2

//position in EEPROM
//AP mode = 1; Station client mode = 2
#define EP_WIFI_MODE			0    //1 byte = flag
#define EP_SSID				1    //33 bytes 32+1 = string  ; warning does not support multibyte char like chinese
#define EP_PASSWORD			34   //65 bytes 64 +1 = string ;warning does not support multibyte char like chinese
#define EP_IP_MODE			99   //1 byte = flag
#define EP_IP_VALUE			100  //4  bytes xxx.xxx.xxx.xxx
#define EP_MASK_VALUE			104  //4  bytes xxx.xxx.xxx.xxx
#define EP_GATEWAY_VALUE		108  //4  bytes xxx.xxx.xxx.xxx
#define EP_BAUD_RATE			112  //4  bytes = int
#define EP_PHY_MODE			116  //1 byte = flag
#define EP_SLEEP_MODE			117  //1 byte = flag
#define EP_CHANNEL			118 //1 byte = flag
#define EP_AUTH_TYPE			119 //1 byte = flag
#define EP_SSID_VISIBLE			120 //1 byte = flag
#define EP_WEB_PORT			121 //4  bytes = int
#define EP_DATA_PORT			125 //4  bytes = int
#define EP_REFRESH_PAGE_TIME			129 //1  bytes = flag
#define EP_HOSTNAME				130//33 bytes 32+1 = string  ; warning does not support multibyte char like chinese
#define EP_XY_FEEDRATE		    164//4  bytes = int
#define EP_Z_FEEDRATE		    168//4  bytes = int
#define EP_E_FEEDRATE		    172//4  bytes = int
#define EP_ADMIN_PWD		    176//21  bytes 20+1 = string  ; warning does not support multibyte char like chinese



//default values
#define DEFAULT_WIFI_MODE			AP_MODE
const char DEFAULT_SSID []  PROGMEM =		"ESP8266";
const char DEFAULT_PASSWORD [] PROGMEM =	"12345678";
#define DEFAULT_IP_MODE				STATIC_IP_MODE
const byte DEFAULT_IP_VALUE[]   =	        {192, 168, 0, 1};
const byte DEFAULT_MASK_VALUE[]  =	        {255, 255, 255, 0};
#define DEFAULT_GATEWAY_VALUE   	        DEFAULT_IP_VALUE
const long DEFAULT_BAUD_RATE =			9600;
const char M117_[] PROGMEM =		"M117 ";
#define DEFAULT_PHY_MODE			PHY_MODE_11G
#define DEFAULT_SLEEP_MODE			MODEM_SLEEP_T
#define DEFAULT_CHANNEL				11
#define DEFAULT_AUTH_TYPE			AUTH_WPA_PSK
#define DEFAULT_SSID_VISIBLE			1
#define DEFAULT_MAX_CONNECTIONS			4
#define DEFAULT_BEACON_INTERVAL			100
const int DEFAULT_WEB_PORT =			80;
const int DEFAULT_DATA_PORT =			8888;
#define DEFAULT_REFRESH_PAGE_TIME			3
const int  DEFAULT_XY_FEEDRATE=1000;
const int  DEFAULT_Z_FEEDRATE	=100;
const int  DEFAULT_E_FEEDRATE=400;
const char DEFAULT_ADMIN []  PROGMEM =	"admin";

//sizes
#define EEPROM_SIZE				256 //max is 512
#define MAX_SSID_LENGTH				32
#define MIN_SSID_LENGTH				1
#define MAX_PASSWORD_LENGTH 			64
#define MIN_PASSWORD_LENGTH 			8
#define MAX_ADMIN_PASSWORD_LENGTH 			16
#define MIN_ADMIN_PASSWORD_LENGTH 			1
#define IP_LENGTH 				4
#define INTEGER_LENGTH 				4
#define MAX_HOSTNAME_LENGTH		32

class CONFIG
{
public:
    static bool read_string(int pos, char byte_buffer[], int size_max);
    static bool read_string(int pos, String & sbuffer, int size_max);
    static bool read_buffer(int pos, byte byte_buffer[], int size_buffer);
    static bool read_byte(int pos, byte * value);
    static bool write_string(int pos, const char * byte_buffer);
    static bool write_string(int pos, const __FlashStringHelper *str);
    static bool write_buffer(int pos, const byte * byte_buffer, int size_buffer);
    static bool write_byte(int pos, const byte value);
    static bool reset_config();
    static void print_config();
};

#endif