+++ archetype = "section" title = "[ESP100]" weight = 800 +++ Set / Display Station SSID ## Input `[ESP100] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * SSID * if SSID is empty, it will display current SSID * if SSID is not empty, it will set the SSID ## Output - In json format ```json { "cmd":"100", "status":"ok", "data":"esp3d" } ``` * `cmd` Id of requested command, should be `100` * `status` status of command, should be `ok` * `data` content of response, here the SSID +++ archetype = "section" title = "[ESP101]" weight = 800 +++ Set Station Password ## Input `[ESP101] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * password * if password is not empty, it will set the password * NOPASSWORD * if NOPASSWORD is present, it will remove the password * if password is empty and NOPASSWORD is not present, it will raise error: `Password not displayable`` ## Output - In json format ```json { "cmd":"101", "status":"ok", "data":"ok" } ``` * `cmd` Id of requested command, should be `101` * `status` status of command, should be `ok` * `data` content of response, here `ok` if error : json format : ```json { "cmd":"101", "status":"error", "data":"Password not displayable" } ``` plain text : `error: Password not displayable` +++ archetype = "section" title = "[ESP102]" weight = 800 +++ Set / Display Station IP mode ## Input `[ESP102] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * mode * if mode is empty, it will display current mode * if mode is not empty, it will set the setting mode: `DHCP` or `STATIC` ## Output - In json format ```json { "cmd":"102", "status":"ok", "data":"DHCP" } ``` * `cmd` Id of requested command, should be `102` * `status` status of command, should be `ok` * `data` content of response, here the mode +++ archetype = "section" title = "[ESP103]" weight = 800 +++ Set / Display Station IP address ## Input `[ESP103]IP= MSK= GW= DNS= json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * IP * if IP is empty, it will display defined IP * if IP is not empty, it will set the IP * MSK * if MSK is empty, it will display defined Network Mask * if MSK is not empty, it will set the Network Mask * GW * if GW is empty, it will display defined Gateway * if GW is not empty, it will set the Gateway * DNS * if DNS is empty, it will display defined DNS * if DNS is not empty, it will set the DNS ## Output - In json format ```json { "cmd": "103", "status": "ok", "data": { "ip": "192.168.0.1", "gw": "192.168.0.1", "msk": "255.255.255.0", "dns": "192.168.0.1" } } ``` * `cmd` Id of requested command, should be `103` * `status` status of command, should be `ok` * `data` content of response, here the IP, GW, MSK and DNS +++ archetype = "section" title = "[ESP104]" weight = 800 +++ Set station fallback mode state at boot which can be BT, WIFI-AP, OFF ## Input `[ESP104] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * mode * if mode is empty, it will display current mode * if mode is not empty, it will set the setting mode: `BT`, `WIFI-AP` or `OFF` ## Output - In json format ```json { "cmd":"104", "status":"ok", "data":"OFF" } ``` * `cmd` Id of requested command, should be `104` * `status` status of command, should be `ok` * `data` content of response, here the mode +++ archetype = "section" title = "[ESP104]" weight = 800 +++ Set station fallback mode state at boot which can be BT, WIFI-SETUP, OFF ## Input `[ESP104] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * mode * if mode is empty, it will display current mode * if mode is not empty, it will set the setting mode: `BT`, `WIFI-SETUP` or `OFF` ## Output - In json format ```json { "cmd":"104", "status":"ok", "data":"OFF" } ``` +++ archetype = "section" title = "[ESP105]" weight = 800 +++ Set / Display Access point SSID ## Input `[ESP105] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * SSID * if SSID is empty, it will display current SSID * if SSID is not empty, it will set the SSID ## Output - In json format ```json { "cmd":"105", "status":"ok", "data":"esp3d" } ``` * `cmd` Id of requested command, should be `105` * `status` status of command, should be `ok` * `data` content of response, here the SSID +++ archetype = "section" title = "[ESP106]" weight = 800 +++ Set Access point password ## Input `[ESP106] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * password * if password is not empty, it will set the password * NOPASSWORD * if NOPASSWORD is present, it will remove the password * if password is empty and NOPASSWORD is not present, it will raise error: `Password not displayable`` ## Output - In json format ```json { "cmd":"106", "status":"ok", "data":"ok" } ``` * `cmd` Id of requested command, should be `106` * `status` status of command, should be `ok` * `data` content of response, here `ok` +++ archetype = "section" title = "[ESP107]" weight = 800 +++ Set / Display Access point IP value ## Input `[ESP107] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * IP * if IP is empty, it will display defined IP * if IP is not empty, it will set the IP ## Output - In json format ```json { "cmd":"107", "status":"ok", "data":"192.168.0.1" } ``` * `cmd` Id of requested command, should be `107` * `status` status of command, should be `ok` * `data` content of response, here the IP +++ archetype = "section" title = "[ESP108]" weight = 800 +++ Set / Display Access point channel value ## Input `[ESP108] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * channel * if channel is empty, it will display defined channel * if channel is not empty, it will set the channel ## Output - In json format ```json { "cmd":"108", "status":"ok", "data":"1" } ``` * `cmd` Id of requested command, should be `108` * `status` status of command, should be `ok` * `data` content of response, here the channel +++ archetype = "section" title = "[ESP110]" weight = 800 +++ Set radio state at boot which can be BT, WIFI-STA, WIFI-AP, ETH-STA, OFF ## Input `[ESP110] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * mode * if mode is empty, it will display current mode * if mode is not empty, it will set the setting mode: `BT`, `WIFI-STA`, `WIFI-AP`, `ETH-STA` or `OFF` ## Output - In json format ```json { "cmd":"110", "status":"ok", "data":"OFF" } ``` * `cmd` Id of requested command, should be `110` * `status` status of command, should be `ok` * `data` content of response, here the mode +++ archetype = "section" title = "[ESP111]" weight = 800 +++ Display current IP ## Input `[ESP111] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * OUTPUT * if OUTPUT is empty, it will display current IP as text `192.168.0.1` * if OUTPUT is `PRINTER`, it will display current IP in printer format `M117 192.168.0.1` ## Output - In json format ```json { "cmd":"111", "status":"ok", "data":"192.168.0.1" } ``` * `cmd` Id of requested command, should be `111` * `status` status of command, should be `ok` * `data` content of response, here the IP +++ archetype = "section" title = "[ESP112]" weight = 800 +++ Set / Display Hostname ## Input `[ESP112] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * hostname * if hostname is empty, it will display current hostname * if hostname is not empty, it will set the hostname ## Output - In json format ```json { "cmd":"112", "status":"ok", "data":"esp3d" } ``` * `cmd` Id of requested command, should be `112` * `status` status of command, should be `ok` * `data` content of response, here the hostname +++ archetype = "section" title = "[ESP114]" weight = 800 +++ Get/Set Boot radio state which can be ON, OFF ## Input `[ESP114] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * mode * if mode is empty, it will display current mode * if mode is not empty, it will set the setting mode: `ON` or `OFF` ## Output - In json format ```json { "cmd":"114", "status":"ok", "data":"OFF" } ``` * `cmd` Id of requested command, should be `114` * `status` status of command, should be `ok` * `data` content of response, here the mode +++ archetype = "section" title = "[ESP115]" weight = 800 +++ Get/Set immediate Network (WiFi/BT/Ethernet) state which can be ON, OFF ## Input `[ESP115] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * mode * if mode is empty, it will display current mode * if mode is not empty, it will set the setting mode: `ON` or `OFF` ## Output - In json format ```json { "cmd":"115", "status":"ok", "data":"OFF" } ``` * `cmd` Id of requested command, should be `115` * `status` status of command, should be `ok` * `data` content of response, here the mode +++ archetype = "section" title = "[ESP120]" weight = 800 +++ Get/Set HTTP state which can be ON, OFF ## Input `[ESP120] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * mode * if mode is empty, it will display current mode * if mode is not empty, it will set the setting mode: `ON` or `OFF` ## Output - In json format ```json { "cmd":"120", "status":"ok", "data":"OFF" } ``` * `cmd` Id of requested command, should be `120` * `status` status of command, should be `ok` * `data` content of response, here the mode +++ archetype = "section" title = "[ESP121]" weight = 800 +++ Get/Set HTTP port ## Input `[ESP121] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * port * if port is empty, it will display current port * if port is not empty, it will set the port ## Output - In json format ```json { "cmd":"121", "status":"ok", "data":"80" } ``` * `cmd` Id of requested command, should be `121` * `status` status of command, should be `ok` * `data` content of response, here the port +++ archetype = "section" title = "[ESP130]" weight = 800 +++ Get/Set TELNET state which can be ON, OFF, CLOSE ## Input `[ESP130] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * mode * if mode is empty, it will display current mode * if mode is not empty, it will set the setting mode: `ON`, `OFF` or `CLOSE` ## Output - In json format ```json { "cmd":"130", "status":"ok", "data":"OFF" } ``` * `cmd` Id of requested command, should be `130` * `status` status of command, should be `ok` * `data` content of response, here the mode +++ archetype = "section" title = "[ESP131]" weight = 800 +++ Get/Set TELNET port ## Input `[ESP131] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * port * if port is empty, it will display current port * if port is not empty, it will set the port ## Output - In json format ```json { "cmd":"131", "status":"ok", "data":"23" } ``` * `cmd` Id of requested command, should be `131` * `status` status of command, should be `ok` * `data` content of response, here the port +++ archetype = "section" title = "[ESP140]" weight = 800 +++ Sync / Set / Get current time ## Input `[ESP140] NOW json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * srv1 / srv2 / srv3 * if srv1 / srv2 / srv3 are empty, it will display current NTP servers * if srv1 / srv2 / srv3 are not empty, it will set the NTP servers * tzone * if tzone is empty, it will display current time zone * if tzone is not empty, it will set the time zone * time * if time is empty, it will display current time * if time is not empty, it will set the time * ntp * if ntp is empty, it will display current NTP state * if ntp is not empty, it will set the NTP state * SYNC * if SYNC, it will restart NTP service to sync time * NOW * if NOW, it will display current time in ISO 8601 format with time zone ## Output - In json format ```json { "cmd":"140", "status":"ok", "data":"2020-01-01T00:00:00 (+08:00)" } ``` * `cmd` Id of requested command, should be `140` * `status` status of command, should be `ok` * `data` content of response, here the time +++ archetype = "section" title = "[ESP150]" weight = 800 +++ Get/Set display/set boot delay in ms / Verbose boot ## Input `[ESP150] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * delay * if delay is empty, it will display current delay * if delay is not empty, it will set the delay * verbose * if verbose is empty, it will display current verbose state * if verbose is not empty, it will set the verbose state ## Output - In json format ```json { "cmd":"150", "status":"ok", "data": { "delay": "100", "verbose": "OFF" } } ``` * `cmd` Id of requested command, should be `150` * `status` status of command, should be `ok` * `data` content of response, here the delay and verbose state +++ archetype = "section" title = "[ESP160]" weight = 800 +++ Get/Set WebSocket state which can be ON, OFF, CLOSE ## Input `[ESP160] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * mode * if mode is empty, it will display current mode * if mode is not empty, it will set the setting mode: `ON`, `OFF` or `CLOSE` ## Output - In json format ```json { "cmd":"160", "status":"ok", "data":"OFF" } ``` * `cmd` Id of requested command, should be `160` * `status` status of command, should be `ok` * `data` content of response, here the mode +++ archetype = "section" title = "[ESP161]" weight = 800 +++ Get/Set WebSocket port ## Input `[ESP161] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * port * if port is empty, it will display current port * if port is not empty, it will set the port ## Output - In json format ```json { "cmd":"161", "status":"ok", "data":"81" } ``` * `cmd` Id of requested command, should be `161` * `status` status of command, should be `ok` * `data` content of response, here the port +++ archetype = "section" title = "[ESP170]" weight = 800 +++ Set Camera command value / list all values in JSON/plain text ## Input `[ESP170] pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * label * if label is empty, it will display current value * if label is not empty, it will set the value label can be: light/framesize/quality/contrast/brightness/saturation/gainceiling/colorbar/awb/agc/aec/hmirror/vflip/awb_gain/agc_gain/aec_value/aec2/cw/bpc/wpc/raw_gma/lenc/special_effect/wb_mode/ae_level value depend on label ## Output - In json format ```json { "cmd":"170", "status":"ok", "data":"ok" } ``` * `cmd` Id of requested command, should be `170` * `status` status of command, should be `ok` * `data` content of response, here `ok` +++ archetype = "section" title = "[ESP171]" weight = 800 +++ Save frame to target path and filename (default target = today date, default name=timestamp.jpg) ## Input `[ESP171] path= filename= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * path * if path is not empty, it will set the path * filename * if filename is not empty, it will set the filename ## Output - In json format ```json { "cmd":"171", "status":"ok", "data":"Snapshot taken" } ``` * `cmd` Id of requested command, should be `171` * `status` status of command, should be `ok` * `data` content of response, here `Snapshot taken` +++ archetype = "section" title = "[ESP180]" weight = 800 +++ Get/Set Ftp state which can be ON, OFF, CLOSE ## Input `[ESP180] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * state * if state is empty, it will display current state * if state is not empty, it will set the state ON, OFF, CLOSE ## Output - In json format ```json { "cmd":"180", "status":"ok", "data":"OFF" } ``` * `cmd` Id of requested command, should be `180` * `status` status of command, should be `ok` * `data` content of response, here the state +++ archetype = "section" title = "[ESP181]" weight = 800 +++ Get/Set Ftp ports ## Input `ESP181]ctrl= active= passive= json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * ctrl * if ctrl is empty, it will display current ctrl port * if ctrl is not empty, it will set the ctrl port * active * if active is empty, it will display current active port * if active is not empty, it will set the active port * passive * if passive is empty, it will display current passive port * if passive is not empty, it will set the passive port +++ archetype = "section" title = "[ESP190]" weight = 800 +++ Set WebDav state which can be ON, OFF, CLOSE ## Input `[ESP190] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * state * if state is empty, it will display current state * if state is not empty, it will set the state ON, OFF, CLOSE ## Output - In json format ```json { "cmd":"190", "status":"ok", "data":"OFF" } ``` * `cmd` Id of requested command, should be `190` * `status` status of command, should be `ok` * `data` content of response, here the state +++ archetype = "section" title = "[ESP191]" weight = 800 +++ Get/Set WebDav port ## Input `[ESP191] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * port * if port is empty, it will display current port * if port is not empty, it will set the port ## Output - In json format ```json { "cmd":"191", "status":"ok", "data":"80" } ``` * `cmd` Id of requested command, should be `191` * `status` status of command, should be `ok` * `data` content of response, here the port +++ archetype = "section" title = "[ESP200]" weight = 800 +++ Get/Set SD state ## Input `[ESP200] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * RELEASESD * if RELEASESD is present, it will release SD card * REFRESH * if REFRESH is present, it will refresh SD card ## Output - In json format ```json { "cmd":"200", "status":"ok", "data":"ok" } ``` states can be : `Busy`. `"Not available`, `ok`, `No SD card` * `cmd` Id of requested command, should be `200` * `status` status of command, should be `ok` * `data` content of response, here `ok` +++ archetype = "section" title = "[ESP201]" weight = 800 +++ Get/Set pin value ## Input `[ESP201]P= V= pwd= Range can be 255 / 1024 / 2047 / 4095 / 8191` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * P * if P is not empty, it will use the pin value * V * if V is empty, it will display current pin value * if V is not empty, it will set the pin value * RAW * if RAW is present, it will not set the pin mode * PULLUP * if PULLUP is present, it will set the pin mode to pullup * ANALOG * if ANALOG is present, it will set the pin ANALOG * ANALOG_RANGE * if ANALOG_RANGE is not empty, it will set the ANALOG_RANGE ## Output - In json format ```json { "cmd":"201", "status":"ok", "data":"1" } ``` * `cmd` Id of requested command, should be `201` * `status` status of command, should be `ok` * `data` content of response, here the pin value is 1 or High +++ archetype = "section" title = "[ESP202]" weight = 800 +++ Get/Set SD card Speed factor 1 2 4 6 8 16 32 ## Input `[ESP202]SPEED= json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * SPEED= * if factor is empty, it will display current factor * if factor is not empty, it will set the factor ## Output - In json format ```json { "cmd":"202", "status":"ok", "data":"1" } ``` * `cmd` Id of requested command, should be `202` * `status` status of command, should be `ok` * `data` content of response, here the current SPI factor +++ archetype = "section" title = "[ESP210]" weight = 800 +++ Get Sensor Value / type/Set Sensor type ## Input `[ESP210] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * type * if type is empty, it will display current type * if type is not empty, it will set the type * interval * if interval is empty, it will display current interval * if interval is not empty, it will set the interval ## Output - In json format ```json { "cmd":"210", "status":"ok", "data":"ok" } ``` * `cmd` Id of requested command, should be `210` * `status` status of command, should be `ok` * `data` content of response, here `ok` +++ archetype = "section" title = "[ESP214]" weight = 800 +++ Output to esp screen status ## Input `[ESP214] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * Text * if Text is not empty, it will set the Text * if Text is empty, it will clear current Text ## Output - In json format ```json { "cmd":"214", "status":"ok", "data":"ok" } ``` * `cmd` Id of requested command, should be `214` * `status` status of command, should be `ok` * `data` content of response, here `ok` +++ archetype = "section" title = "[ESP215]" weight = 800 +++ Start a Touch Calibration ## Input `[ESP215] json= pwd=` * json=no the output format * pwd= the admin password if authentication is enabled * CALIBRATE * if CALIBRATE is present, it will start the calibration ## Output - In json format ```json { "cmd":"215", "status":"ok", "data":"ok" } ``` * `cmd` Id of requested command, should be `215` * `status` status of command, should be `ok` * `data` content of response, here `ok` +++ archetype = "section" title = "[ESP220]" weight = 800 +++ Get ESP pins definition ## Input `[ESP220] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled ## Output - In json format ```json { "cmd": "220", "status": "ok", "data": [ { "id": "SD CS", "value": "13" }, { "id": "SD MOSI", "value": "15" }, { "id": "SD MISO", "value": "2" }, { "id": "SD SCK", "value": "14" }, { "id": "SD DETECT", "value": "-1" }, { "id": "SD SWITCH", "value": "26" } ] } ``` * `cmd` Id of requested command, should be `220` * `status` status of command, should be `ok` * `data` content of response, here the pins definitions - plain text format ```text SD CS: 13 SD MOSI: 15 SD MISO: 2 SD SCK: 14 SD DETECT: -1 SD SWITCH: 26 ``` +++ archetype = "section" title = "[ESP250]" weight = 800 +++ Play sound ## Input `[ESP250]F= D= json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * F * if F is empty, it will use current frequency * if F is not empty, it will use the frequency * D * if D is empty, it will use current duration * if D is not empty, it will use the duration ## Output - In json format ```json { "cmd":"250", "status":"ok", "data":"ok" } ``` * `cmd` Id of requested command, should be `250` * `status` status of command, should be `ok` * `data` content of response, here `ok` +++ archetype = "section" title = "[ESP290]" weight = 800 +++ Delay/Pause command ## Input `[ESP290] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled * delay * if delay is empty, it will use 0 delay * if delay is not empty, it will use the delay ## Output - In json format ```json { "cmd":"290", "status":"ok", "data":"ok" } ``` * `cmd` Id of requested command, should be `290` * `status` status of command, should be `ok` * `data` content of response, here `ok` +++ archetype = "section" title = "[ESP400]" weight = 800 +++ Get full ESP3D settings ## Input `[ESP400] json= pwd=` * json=no the output format can be in JSON or plain text * pwd= the admin password if authentication is enabled ## Output Passwords are not displayed and replaced by `********` * if json ```json {"cmd":"400","status":"ok","data":[ {"F":"network/network","P":"130","T":"S","R":"1","V":"esp3d","H":"hostname" ,"S":"32", "M":"1"}, {"F":"network/network","P":"0","T":"B","R":"1","V":"1","H":"radio mode","O":[{"none":"0"}, {"sta":"1"}, {"ap":"2"}, {"setup":"5"}]}, {"F":"network/network","P":"1034","T":"B","R":"1","V":"1","H":"radio_boot","O":[{"no":"0"}, {"yes":"1"}]}, {"F":"network/sta","P":"1","T":"S","V":"Luc-Lab","S":"32","H":"SSID","M":"1"}, {"F":"network/sta","P":"34","T":"S","N":"1","MS":"0","R":"1","V":"********","S":"64","H":"pwd","M":"8"}, {"F":"network/sta","P":"99","T":"B","R":"1","V":"1","H":"ip mode","O":[{"dhcp":"1"}, {"static":"0"}]}, {"F":"network/sta","P":"100","T":"A","R":"1","V":"192.168.0.1","H":"ip"}, {"F":"network/sta","P":"108","T":"A","R":"1","V":"192.168.0.1","H":"gw"}, {"F":"network/sta","P":"104","T":"A","R":"1","V":"255.255.255.0","H":"msk"}, {"F":"network/sta","P":"1029","T":"A","R":"1","V":"192.168.0.1","H":"DNS"}, {"F":"network/sta","P":"1035","T":"B","R":"0","V":"5","H":"sta fallback mode","O":[{"none":"0"}, {"setup":"5"}]}, {"F":"network/ap","P":"218","T":"S","R":"1","V":"ESP3D","S":"32","H":"SSID","M":"1"}, {"F":"network/ap","P":"251","T":"S","N":"1","MS":"0","R":"1","V":"********","S":"64","H":"pwd","M":"8"}, {"F":"network/ap","P":"316","T":"A","R":"1","V":"192.168.0.1","H":"ip"}, {"F":"network/ap","P":"118","T":"B","R":"1","V":"11","H":"channel","O":[{"1":"1"}, {"2":"2"}, {"3":"3"}, {"4":"4"}, {"5":"5"}, {"6":"6"}, {"7":"7"}, {"8":"8"}, {"9":"9"}, {"10":"10"}, {"11":"11"}, {"12":"12"}, {"13":"13"}, {"14":"14"}]}, {"F":"service/http","P":"328","T":"B","R":"1","V":"1","H":"enable","O":[{"no":"0"},{"yes":"1"}]}, {"F":"service/http","P":"121","T":"I","R":"1","V":"8181","H":"port","S":"65001","M":"1"}, {"F":"service/telnetp","P":"329","T":"B","R":"1","V":"1","H":"enable","O":[{"no":"0"},{"yes":"1"}]}, {"F":"service/telnetp","P":"125","T":"I","R":"1","V":"23","H":"port","S":"65001","M":"1"}, {"F":"service/webdavp","P":"1024","T":"B","R":"1","V":"1","H":"enable","O":[{"no":"0"},{"yes":"1"}]}, {"F":"service/webdavp","P":"1025","T":"I","R":"1","V":"80","H":"port","S":"65001","M":"1"}, {"F":"service/time","P":"120","T":"B","V":"1","H":"i-time","O":[{"no":"0"},{"yes":"1"}]}, {"F":"service/time","P":"1042","T":"S","R":"1","V":"+08:00","H":"tzone","O":[{"-12:00":"-12:00"}, {"-11:00":"-11:00"}, {"-10:00":"-10:00"}, {"-09:00":"-09:00"}, {"-08:00":"-08:00"}, {"-07:00":"-07:00"}, {"-06:00":"-06:00"}, {"-05:00":"-05:00"}, {"-04:00":"-04:00"}, {"-03:30":"-03:30"}, {"-03:00":"-03:00"}, {"-02:00":"-02:00"}, {"-01:00":"-01:00"}, {"+00:00":"+00:00"}, {"+01:00":"+01:00"}, {"+02:00":"+02:00"}, {"+03:00":"+03:00"}, {"+03:30":"+03:30"}, {"+04:00":"+04:00"}, {"+04:30":"+04:30"}, {"+05:00":"+05:00"}, {"+05:30":"+05:30"}, {"+05:45":"+05:45"}, {"+06:00":"+06:00"}, {"+06:30":"+06:30"}, {"+07:00":"+07:00"}, {"+08:00":"+08:00"}, {"+08:45":"+08:45"}, {"+09:00":"+09:00"}, {"+09:30":"+09:30"}, {"+10:00":"+10:00"}, {"+10:30":"+10:30"}, {"+11:00":"+11:00"}, {"+12:00":"+12:00"}, {"+12:45":"+12:45"}, {"+13:00":"+13:00"}, {"+14:00":"+14:00"}]}, {"F":"service/time","P":"464","T":"S","R":"1","V":"time.windows.com","S":"128","H":"t-server","M":"0"}, {"F":"service/time","P":"593","T":"S","R":"1","V":"time.google.com","S":"128","H":"t-server","M":"0"}, {"F":"service/time","P":"722","T":"S","R":"1","V":"0.pool.ntp.org","S":"128","H":"t-server","M":"0"}, {"F":"service/notification","P":"1022","T":"B","R":"1","V":"1","H":"auto notif","O":[{"no":"0"},{"yes":"1"}]}, {"F":"service/notification","P":"116","T":"B","R":"1","V":"0","H":"notification","O":[{"none":"0"}, {"pushover":"1"}, {"email":"2"}, {"line":"3"}, {"telegram":"4"}, {"IFTTT":"5"}]}, {"F":"service/notification","P":"332","T":"S","R":"1","V":"********","S":"63","H":"t1","M":"0"}, {"F":"service/notification","P":"396","T":"S","R":"1","V":"********","S":"63","H":"t2","M":"0"}, {"F":"service/notification","P":"856","T":"S","R":"1","V":" ","S":"128","H":"ts","M":"0"}, {"F":"system/system","P":"461","T":"B","V":"0","H":"targetfw","O":[{"repetier":"50"}, {"marlin":"20"}, {"smoothieware":"40"}, {"grbl":"10"}, {"unknown":"0"}]}, {"F":"system/system","P":"112","T":"I","V":"115200","H":"baud","O":[{"9600":"9600"}, {"19200":"19200"}, {"38400":"38400"}, {"57600":"57600"}, {"74880":"74880"}, {"115200":"115200"}, {"230400":"230400"}, {"250000":"250000"}, {"500000":"500000"}, {"921600":"921600"}, {"1958400":"1958400"}]}, {"F":"system/boot","P":"320","T":"I","V":"100","H":"bootdelay","S":"40000","M":"0"}, {"F":"system/boot","P":"1023","T":"B","V":"0","H":"verbose","O":[{"no":"0"},{"yes":"1"}]}, {"F":"system/outputmsg","P":"129","T":"B","V":"1","H":"serial","O":[{"no":"0"},{"yes":"1"}]}, {"F":"system/outputmsg","P":"851","T":"B","V":"1","H":"M117","O":[{"no":"0"},{"yes":"1"}]}, {"F":"system/outputmsg","P":"1006","T":"B","V":"1","H":"telnet","O":[{"no":"0"},{"yes":"1"}] }]} ``` 1 - key : `Settings` 2 - value: array of data formated like this {"F":"network/network","P":"130","T":"S","V":"esp3d","H":"hostname","S":"32","M":"1"} or {"F":"service/notification","P":"1004","T":"B","V":"1","H":"auto notif","O":[{"no":"0"},{"yes":"1"}]} - F: is filter formated as section/sub-section, if section is same as sub-section, it means no sub-section - P: is id (also position reference so it is unique) - T: is type of data which can be: - S: for string - I: for integer - B: for Byte - A: for IP address / Mask - F: for float (only grblHAL) - M: for bits mask (only grblHAL) - X: for exclusive bitsfield (only grblHAL) - V: is current value, if type is string and value is `********`, (8 stars) then it is a password - E: is integer for exactess / precision of float/double value (only grblHAL) - U: is text unit of value (only grblHAL) - H: is text label of value - S: is max size if type is string, and max possible value if value is number (byte, integer) - M: is min size if type is string, and min possible value if value is number (byte, integer) - MS: is additionnal min size if type is string (e.g for password can be 0 or 8, so need additional min size), M should be the more minimal value so MS value must be between M and S - O: is an array of {label:value} used for possible values in selection or bits labels list - R: need restart to be applied Note: if Type `M` and `X` use `O` entry to define the label / position, if `O` is `[]` then axis label are used according need `X`, `Y`, `Z`, `A`, `B`, `C` Note2 : the 2.1 Flag type is no more used, several entries are used instead grouped by sub-section If no json the list is limited to a list of `: ` ```text Settings: network/network/hostname: esp3d network/network/mdns: 1 ```