* Change STA SSID [ESP100] if authentication is on, need admin password [ESP100]pwd= * Change STA Password [ESP101] if authentication is on, need admin password [ESP101]pwd= * Change Hostname [ESP102] if authentication is on, need admin password [ESP102]pwd= * Change Wifi mode (STA/AP) [ESP103] if authentication is on, need admin password [ESP103]pwd= * Change STA IP mode (DHCP/STATIC) [ESP104] if authentication is on, need admin password [ESP104]pwd= * Change AP SSID [ESP105] if authentication is on, need admin password [ESP105]pwd= * Change AP Password [ESP106] if authentication is on, need admin password [ESP106]pwd= * Change AP IP mode (DHCP/STATIC) [ESP107] if authentication is on, need admin password [ESP107]pwd= * Set wifi on/off [ESP110] state can be ON, OFF, RESTART if authentication is on, need admin password [ESP110]pwd= * Get current IP [ESP111]

* Get hostname [ESP112]

* Restart time client [ESP114] *Get/Set pin value [ESP201]P V [PULLUP=YES RAW=YES]pwd= if no V get P value if V 0/1 set INPUT_PULLUP value, but for GPIO16 INPUT_PULLDOWN_16 GPIO1 and GPIO3 cannot be used as they are used for serial if PULLUP=YES set input pull up, if not set input if RAW=YES do not set pinmode just read value *Save data string [ESP300] pwd= *Get data string [ESP301] pwd= *Get full EEPROM settings content but do not give any passwords can filter if only need wifi or printer [ESP400] *Set EEPROM setting position in EEPROM, type: B(byte), I(integer/long), S(string), A(IP address / mask) [ESP401]P= T= V= pwd= *Get available AP list (limited to 30) output is JSON or plain text according parameter [ESP410] *Get current settings of ESP3D output is JSON or plain text according parameter [ESP420] * Get/Set ESP mode cmd can be RESET, SAFEMODE, CONFIG, RESTART [ESP444] if authentication is on, need admin password for RESET, RESTART and SAFEMODE [ESP444]pwd= * Change / Reset user password [ESP555]pwd= if no password set it use default one * Read SPIFFS file and send each line to serial [ESP700] * Format SPIFFS [ESP710]FORMAT pwd= * SPIFFS total size and used size [ESP720]

* Get fw version and basic information [ESP800]

* Get fw target [ESP801]

* Clear status/error/info list cmd can be ALL, ERROR, INFO, STATUS [ESP999]