mirror of
https://git.mirrors.martin98.com/https://github.com/luc-github/ESP3D.git
synced 2025-08-05 20:46:12 +08:00
93312ff8b5
* Update WebSocket library * Update SSDP library * Update TFT_eSPI library * Update EspLuaEngine library * Update SDFat library * Change to pioarduino * Make ESP3DMessageFIFO and ESP3DMessage more thread safe * Fix sanity checks for BT * Add some C6 support * Refactor ethernet code * Split Ethernet Sta / WiFi sta ESP Commands and settings * Simplify wait and wdtFeed code * Set C3 with 4MB by default in platformio.ini * Apply Disable brown out only on ESP32 to avoid crash e.g:ESP32S3 * Add missing entries in platformio.ini
49 lines
2.0 KiB
C
49 lines
2.0 KiB
C
// ST7789 240 x 240 display with no chip select line
|
|
#define USER_SETUP_ID 207
|
|
|
|
#define ST7789_DRIVER // Configure all registers
|
|
|
|
// #define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
|
|
|
|
#define TFT_WIDTH 240
|
|
#define TFT_HEIGHT 320
|
|
|
|
#define CGRAM_OFFSET
|
|
// #define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
|
|
#define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
|
|
|
|
// #define TFT_INVERSION_ON
|
|
#define TFT_INVERSION_OFF
|
|
|
|
#define TFT_PARALLEL_8_BIT
|
|
|
|
// The ESP32 and TFT the pins used for testing are:
|
|
#define TFT_CS 6 // Chip select control pin (library pulls permanently low
|
|
#define TFT_DC 7 // Data Command control pin
|
|
#define TFT_RST -1 // Reset pin, toggles on startup
|
|
|
|
#define TFT_WR 8 // Write strobe control pin
|
|
#define TFT_RD -1 // Read strobe control pin
|
|
|
|
#define TFT_D0 48 // Must use pins in the range 0-31 or alternatively 32-48
|
|
#define TFT_D1 47 // so a single register write sets/clears all bits.
|
|
#define TFT_D2 39 // Pins can be randomly assigned, this does not affect
|
|
#define TFT_D3 40 // TFT screen update performance.
|
|
#define TFT_D4 41
|
|
#define TFT_D5 42
|
|
#define TFT_D6 45
|
|
#define TFT_D7 46
|
|
|
|
#define TFT_BL 38 // LED back-light
|
|
|
|
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
|
|
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
|
|
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
|
|
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
|
|
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
|
|
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
|
|
|
|
#define SMOOTH_FONT
|