mirror of
https://git.mirrors.martin98.com/https://github.com/luc-github/ESP3D.git
synced 2025-08-05 19:56:02 +08:00
93312ff8b5
* Update WebSocket library * Update SSDP library * Update TFT_eSPI library * Update EspLuaEngine library * Update SDFat library * Change to pioarduino * Make ESP3DMessageFIFO and ESP3DMessage more thread safe * Fix sanity checks for BT * Add some C6 support * Refactor ethernet code * Split Ethernet Sta / WiFi sta ESP Commands and settings * Simplify wait and wdtFeed code * Set C3 with 4MB by default in platformio.ini * Apply Disable brown out only on ESP32 to avoid crash e.g:ESP32S3 * Add missing entries in platformio.ini
30 lines
1.4 KiB
C
30 lines
1.4 KiB
C
#define USER_SETUP_ID 66
|
|
|
|
#define GC9A01_DRIVER // Full configuration option, define additional parameters below for this display
|
|
|
|
#define TFT_RGB_ORDER TFT_RGB // Colour order Blue-Green-Red
|
|
#define TFT_HEIGHT 240 // GC9A01 240 x 240
|
|
|
|
#define TFT_SCLK D8
|
|
#define TFT_MISO D9
|
|
#define TFT_MOSI D10
|
|
#define TFT_CS D1 // Chip select control pin
|
|
#define TFT_DC D3 // Data Command control pin
|
|
#define TFT_BL D6
|
|
#define TFT_RST -1 // Reset pin (could connect to RST pin)
|
|
|
|
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
|
|
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
|
|
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
|
|
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
|
|
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
|
|
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
|
|
|
|
#define SMOOTH_FONT
|
|
|
|
#define SPI_FREQUENCY 40000000
|
|
#define SPI_READ_FREQUENCY 20000000
|
|
// #define USE_HSPI_PORT
|