ESP8266

FW for ESP8266 used with 3D printer

##Description
Thanks to @disneysw for bringing this module idea
Thanks to @lkarlslund for suggestion about independant reset using GPIO2

Have a bridge configurable by web (implemented) and optionally by printer (not yet implemented)
Have a front end to know what is the wifi status (implemented) or know what is the print status (not yet implemented) - this part can be optional and removed by compilation directive if no need

Should be compatible with reprap printer (Marlin FW/Repetier FW)

##Hardware connection
--Use GPIO2 to ground to reset all settings in hard way - 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW - I did not found information on this. Currently boot take 10 sec - giving 8 seconds to connect GPIO2 to GND and do an hard recovery for settings
--Use GPIO0 to ground to be in update mode
--Use a switch to reset/disable module

##Development
Currently using Arduino IDE 1.6.4 with the esp8266 module from board manager added from github.com/esp8266/Arduino
using relased version (http://arduino.esp8266.com/package_esp8266com_index.json)
and staging version (http://arduino.esp8266.com/staging/package_esp8266com_index.json)

Additionnaly:
--Use minimal css from http://getbootstrap.com/examples/theme/ if connected to internet, this is to get better UI and rendering according display device (link can be changed in FW), if not available ,CSS is ignored displaying basic HTML

##Flash the Module
*Tools:
--Use IDE to upload directly (latest version of board manager module generate one binary)

*Connection --Connect GPIO0 to ground to be in update mode

##Web configuration
*Wifi Mode : Access point / Client station
*IP Generation: DHCP/Static IP
*IP/MASK/GATEWAY for static data
*Baud Rate for serial (supported : 9600, 19200, 38400, 57600, 115200, 230400)
*web port and data port

##Default Configuration
Default Settings:
AP:ESP8266
PW:12345678
Authentification: WPA
Mode: g (n is not supported by AP, just by STA)
channel: 11
AP: visible
Sleep Mode: Modem
IP Mode: Static IP
IP: 192.168.0.1
Mask: 255.255.255.0
GW:192.168.0.1
Baud rate: 9600
Web port:80
Data port: 8888

These are the UI when css is in cache or internet is available:

##Commands from/to serial(not yet implemented):
*from module to printer [Need Printer FW support and can be disabled in ESP FW]
-M800 S1 , restart module done need a wifi/activity restart
-M801 [Message], Error message from module
-M802 [Message], Status message from module
-M804 [AP/STATION,SSID,DHC/STATIC,IP,MASK,GW,STATUS,MAC ADDRESSS, BAUD?], ]Module configuration without password

*from host to printer (not yet implemented) [Need Printer FW support] on port 8888
-M803 [IP, AP,SSID, Password....], ]Module configuration settings to be used by module
-M805 query to get M804 informations

*from printer to module [Need Printer FW support and can be disabled in ESP FW] (not yet implemented)
-request configuration/status (generate the M804 as answer)
-set AP/STATION,SSID,PASSSWORD,DHC/STATIC,IP,MASK,GW,BAUD from serial

##Front End (basic implemented) [need Printer FW support it] or just display module status --Display printer status
--Display temperatures (done)
--Display positions/flow/speed (done)
--Display print progress if any
--List SDCard Content
--Launch/Stop/(Pause?) a Print

##TODO
-- Define Front End Functions
-- do testing
-- do a complete drawing for connections
-- add some Javascript to enhance web UI

more to come