mirror of
https://git.mirrors.martin98.com/https://github.com/luc-github/ESP3D.git
synced 2025-08-04 13:50:36 +08:00
5963eca3a6
new command [ESP920] to configure outputs Remove REPETIER for Davinci definition that should be pure REPETIER from now Change FW Target ID numbering to support different Flavors more easily Add Ini file configuration file from SD (espconf.ini) to configure ESP3D at start Add Target FW ID in ESP800 command in addition to Target FW short name Bumb version Warning this commit is breaking EEPROM org so - check then in webUI after
228 lines
8.4 KiB
Plaintext
228 lines
8.4 KiB
Plaintext
Note:
|
|
1 - add space to separate parameters
|
|
2 - if parameter has space add \ in front of space to not be seen as separator
|
|
|
|
* Set/Get STA SSID
|
|
[ESP100]<SSID>pwd=<admin password>
|
|
|
|
* Set STA Password
|
|
[ESP101]<Password>pwd=<admin password>
|
|
|
|
* Set/Get STA IP mode (DHCP/STATIC)
|
|
[ESP102]<mode>pwd=<admin password>
|
|
|
|
* Set/Get STA IP/Mask/GW
|
|
[ESP103]IP=<IP> MSK=<IP> GW=<IP> pwd=<admin password>
|
|
|
|
* Set/Get AP SSID
|
|
[ESP105]<SSID>pwd=<admin password>
|
|
|
|
* Change AP Password
|
|
[ESP106]<Password>pwd=<admin password>
|
|
|
|
* Set/Get AP IP
|
|
[ESP107]<IP>pwd=<admin password>
|
|
|
|
* Set/Get AP channel
|
|
[ESP108]<channel>pwd=<admin password>
|
|
|
|
* Set/Get radio state which can be WIFI-STA, WIFI-AP, BT, ETH-STA, ETH-AP, OFF
|
|
[ESP110]<state>pwd=<admin password>
|
|
|
|
* Get current IP
|
|
[ESP111]<header answer>
|
|
|
|
* Get/Set hostname
|
|
[ESP112]<Hostname> pwd=<admin password>
|
|
|
|
* Get/Set immediate network(WiFi/BT/Ethernet) state which can be ON, OFF
|
|
[ESP115]<state>pwd=<admin password>
|
|
|
|
* Get/Set HTTP state which can be ON, OFF
|
|
[ESP120]<state>pwd=<admin password>
|
|
|
|
* Get/Set HTTP port
|
|
[ESP121]<port>pwd=<admin password>
|
|
|
|
* Get/Set Telnet state which can be ON, OFF, CLOSE
|
|
[ESP130]<state>pwd=<admin password>
|
|
|
|
* Get/Set Telnet port
|
|
[ESP131]<port>pwd=<admin password>
|
|
|
|
* Sync / Set / Get current time
|
|
[ESP140]<SYNC> <srv1=XXXXX> <srv2=XXXXX> <srv3=XXXXX> <zone=xxx> <dst=YES/NO> <time=YYYY-MM-DD#H24:MM:SS> pwd=<admin password>
|
|
|
|
* Get/Set boot delay
|
|
[ESP150]<time in milliseconds>[pwd=<admin password>]
|
|
|
|
* Get/Set WebSocket state which can be ON, OFF
|
|
[ESP160]<state>pwd=<admin password>
|
|
|
|
* Get/Set WebSocket port
|
|
[ESP161]<port>pwd=<admin password>
|
|
|
|
* Get/Set Camera command value / list all values in JSON/plain
|
|
label can be: light/framesize/quality/contrast/brightness/saturation/gainceiling/colorbar/awb/agc/aec/hmirror/vflip/awb_gain/agc_gain/aec_value/aec2/cw/bpc/wpc/raw_gma/lenc/special_effect/wb_mode/ae_level
|
|
[ESP170]<plain><label=value> pwd=<admin password>
|
|
|
|
* Get/Set Ftp state which can be ON, OFF, CLOSE
|
|
[ESP180]<state>pwd=<admin password>
|
|
|
|
* Get/Set Ftp ports
|
|
[ESP181]ctrl=<port> active=<port> passive=<port> pwd=<admin password>
|
|
|
|
* Get SD Card Status
|
|
[ESP200] pwd=<user/admin password>
|
|
|
|
*Get/Set pin value
|
|
[ESP201]P<pin> V<value> [PULLUP=YES RAW=YES]pwd=<admin password>
|
|
if no V<value> get P<pin> value
|
|
if V<value> 0/1 set INPUT_PULLUP value, but for GPIO16(ESP8266) INPUT_PULLDOWN_16
|
|
if PULLUP=YES set input pull up (for GPIO16(ESP8266) INPUT_PULLDOWN_16), if not set input
|
|
if RAW=YES do not set pinmode just read value
|
|
Flash pins (6~11) cannot be used
|
|
|
|
* Output to esp screen status
|
|
[ESP214]<Text>pwd=<user password>
|
|
|
|
* Touch Calibration
|
|
[ESP215]<CALIBRATE>[pwd=<user password>]
|
|
|
|
* Take screen snapshot
|
|
[ESP216]<SNAP>[pwd=<user password>]
|
|
|
|
* Play sound
|
|
No parameter just play beep
|
|
[ESP250]F=<frequency> D=<duration> [pwd=<user password>]
|
|
|
|
* Delay command
|
|
[ESP290]<delay in ms>[pwd=<user password>]
|
|
|
|
* Get full EEPROM settings content
|
|
but do not give any passwords
|
|
[ESP400] pwd=<admin password>
|
|
|
|
*Set EEPROM setting
|
|
position in EEPROM, type: B(byte), I(integer/long), S(string), A(IP address / mask)
|
|
[ESP401]P=<position> T=<type> V=<value> pwd=<user/admin password>
|
|
Description: Positions:
|
|
ESP_RADIO_MODE 0 //1 byte = flag
|
|
ESP_STA_SSID 1 //33 bytes 32+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_STA_PASSWORD 34 //65 bytes 64 +1 = string ;warning does not support multibyte char like chinese
|
|
ESP_STA_IP_MODE 99 //1 byte = flag
|
|
ESP_STA_IP_VALUE 100 //4 bytes xxx.xxx.xxx.xxx
|
|
ESP_STA_MASK_VALUE 104 //4 bytes xxx.xxx.xxx.xxx
|
|
ESP_STA_GATEWAY_VALUE 108 //4 bytes xxx.xxx.xxx.xxx
|
|
ESP_BAUD_RATE 112 //4 bytes = int
|
|
ESP_NOTIFICATION_TYPE 116 //1 byte = flag
|
|
ESP_CALIBRATION 117 //1 byte = flag
|
|
ESP_AP_CHANNEL 118 //1 byte = flag
|
|
ESP_BUZZER 119 //1 byte = flag
|
|
ESP_INTERNET_TIME 120 //1 byte = flag
|
|
ESP_HTTP_PORT 121 //4 bytes = int
|
|
ESP_TELNET_PORT 125 //4 bytes = int
|
|
ESP_SERIAL_FLAG 129 //1 bytes = flag
|
|
ESP_HOSTNAME 130 //33 bytes 32+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_SENSOR_INTERVAL 164 //4 bytes = int
|
|
ESP_SETTINGS_VERSION 168 //8 bytes = 7+1 = string ESP3D + 2 digits
|
|
ESP_ADMIN_PWD 176 //21 bytes 20+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_USER_PWD 197 //21 bytes 20+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_AP_SSID 218 //33 bytes 32+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_AP_PASSWORD 251 //65 bytes 64 +1 = string ;warning does not support multibyte char like chinese
|
|
ESP_AP_IP_VALUE 316 //4 bytes xxx.xxx.xxx.xxx
|
|
ESP_BOOT_DELAY 320 //4 bytes = int
|
|
ESP_WEBSOCKET_PORT 324 //4 bytes= int
|
|
ESP_HTTP_ON 328 //1 byte = flag
|
|
ESP_TELNET_ON 329 //1 byte = flag
|
|
ESP_WEBSOCKET_ON 330 //1 byte = flag
|
|
ESP_SD_SPEED_DIV 331 //1 byte = flag
|
|
ESP_NOTIFICATION_TOKEN1 332 //64 bytes 63+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_NOTIFICATION_TOKEN2 396 //64 bytes 63+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_SENSOR_TYPE 460 //1 bytes = flag
|
|
ESP_TARGET_FW 461 //1 bytes = flag
|
|
ESP_TIMEZONE 462 //1 bytes = flag
|
|
ESP_TIME_IS_DST 463 //1 bytes = flag
|
|
ESP_TIME_SERVER1 464 //129 bytes 128+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_TIME_SERVER2 593 //129 bytes 128+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_TIME_SERVER3 722 //129 bytes 128+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_PRINTER_LCD 851 //1 bytes = flag
|
|
ESP_SD_MOUNT 852 //1 bytes = flag
|
|
ESP_SESSION_TIMEOUT 853 //1 bytes = flag
|
|
ESP_WEBSOCKET_FLAG 854 //1 bytes = flag
|
|
ESP_SD_CHECK_UPDATE_AT_BOOT 855//1 bytes = flag
|
|
ESP_NOTIFICATION_SETTINGS 856 //129 bytes 128+1 = string ; warning does not support multibyte char like chinese
|
|
ESP_CALIBRATION_1 985 //4 bytes = int
|
|
ESP_CALIBRATION_2 989 //4 bytes = int
|
|
ESP_CALIBRATION_3 993 //4 bytes = int
|
|
ESP_CALIBRATION_4 997 //4 bytes = int
|
|
ESP_CALIBRATION_5 1001 //4 bytes = int
|
|
ESP_SETUP 1005 //1 byte = flag
|
|
ESP_TELNET_FLAG 1006 //1 byte = flag
|
|
ESP_BT_FLAG 1007 //1 byte = flag
|
|
ESP_LCD_FLAG 1008 //1 byte = flag
|
|
ESP_FTP_CTRL_PORT 1009 //4 bytes = int
|
|
ESP_FTP_DATA_ACTIVE_PORT 1013 //4 bytes = int
|
|
ESP_FTP_DATA_PASSIVE_PORT 1017 //4 bytes = int
|
|
ESP_FTP_ON 1021 //1 byte = flag
|
|
ESP_AUTO_NOTIFICATION 1022 //1 byte = flag
|
|
|
|
* Get/Set Check update at boot state which can be ON, OFF
|
|
[ESP402]<state>pwd=<admin password>
|
|
|
|
*Get available AP list (limited to 30)
|
|
output is JSON or plain text according parameter
|
|
[ESP410]<plain><pwd=admin/user>
|
|
|
|
*Get current settings of ESP3D
|
|
output is plain text
|
|
[ESP420]<pwd=admin/user>
|
|
|
|
* Set ESP State
|
|
cmd are RESTART / RESET
|
|
[ESP444]<cmd><pwd=admin>
|
|
|
|
* Change admin password
|
|
[ESP550]<password>pwd=<admin password>
|
|
|
|
* Change user password
|
|
[ESP555]<password>pwd=<admin/user password>
|
|
|
|
* Send Notification
|
|
[ESP600]msg [pwd=<admin password>]
|
|
|
|
* Set/Get Notification settings
|
|
[ESP610]type=<NONE/PUSHOVER/EMAIL/LINE> T1=<token1> T2=<token2> TS=<Settings> [pwd=<admin password>]
|
|
Get will give type and settings only, not the protected T1/T2
|
|
|
|
* Format ESP Filesystem
|
|
[ESP710]FORMAT pwd=<admin password>
|
|
|
|
* Format SD Filesystem
|
|
[ESP715]FORMATSD pwd=<admin password>
|
|
|
|
* List ESP Filesystem
|
|
[ESP720]<Root> pwd=<admin password>
|
|
|
|
* Action on ESP Filesystem
|
|
rmdir / remove / mkdir / exists / create
|
|
[ESP730]<Action>=<path> pwd=<admin password>
|
|
|
|
* List SD Filesystem
|
|
[ESP740]<Root> pwd=<admin password>
|
|
|
|
* Action on SD Filesystem
|
|
rmdir / remove / mkdir / exists / create
|
|
[ESP750]<Action>=<path> pwd=<admin password>
|
|
|
|
* FW Informations
|
|
[ESP800]<plain> pwd=<admin password>
|
|
|
|
* Get state / Set Enable / Disable Serial Communication
|
|
[ESP900]<ENABLE/DISABLE>[pwd=<admin/user password>]
|
|
|
|
* Get state / Set Enable / Disable buzzer
|
|
[ESP910]<ENABLE/DISABLE>[pwd=<admin/user password>]
|
|
|
|
*Get state / Set state of output message clients
|
|
[ESP910]<SERIAL / LCD / PRINTER_LCD/ WEBSOCKET / TELNET /BT / ALL>=<ON/OFF>[pwd=<admin/user password>] |