mirror of
https://git.mirrors.martin98.com/https://github.com/luc-github/ESP3D.git
synced 2025-07-28 02:41:58 +08:00
93312ff8b5
* Update WebSocket library * Update SSDP library * Update TFT_eSPI library * Update EspLuaEngine library * Update SDFat library * Change to pioarduino * Make ESP3DMessageFIFO and ESP3DMessage more thread safe * Fix sanity checks for BT * Add some C6 support * Refactor ethernet code * Split Ethernet Sta / WiFi sta ESP Commands and settings * Simplify wait and wdtFeed code * Set C3 with 4MB by default in platformio.ini * Apply Disable brown out only on ESP32 to avoid crash e.g:ESP32S3 * Add missing entries in platformio.ini
682 lines
16 KiB
C
682 lines
16 KiB
C
/*
|
|
configuration.h - ESP3D configuration file
|
|
|
|
Copyright (c) 2014 Luc Lebosse. All rights reserved.
|
|
|
|
This code is free software; you can redistribute it and/or
|
|
modify it under the terms of the GNU Lesser General Public
|
|
License as published by the Free Software Foundation; either
|
|
version 2.1 of the License, or (at your option) any later version.
|
|
|
|
This code is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
Lesser General Public License for more details.
|
|
|
|
You should have received a copy of the GNU Lesser General Public
|
|
License along with This code; if not, write to the Free Software
|
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
#ifndef _CONFIGURATION_H
|
|
#define _CONFIGURATION_H
|
|
/* Setup station as default, use AP mode first if not done
|
|
* Note: need both defined to enable it
|
|
* Uncomment and edit them to define
|
|
*/
|
|
// #define STATION_WIFI_SSID "*********"
|
|
// #define STATION_WIFI_PASSWORD "*********"
|
|
|
|
/* You can also use a different config file for SSID/password
|
|
* Just save it in same location as this configuration.h
|
|
* This file is ignored by github
|
|
*/
|
|
#if defined __has_include
|
|
#if __has_include("myconfig.h")
|
|
#include "myconfig.h"
|
|
#endif
|
|
#endif
|
|
/************************************
|
|
*
|
|
* ESP32 C3 -patch
|
|
*
|
|
* Uncomment only if your ESP32 C3 board cannot start
|
|
*
|
|
************************************/
|
|
// Possible values
|
|
// WIFI_POWER_5dBm
|
|
// WIFI_POWER_8_5dBm
|
|
// WIFI_POWER_15dBm
|
|
|
|
// #define ESP32_WIFI_TX_POWER WIFI_POWER_15dBm
|
|
|
|
/************************************
|
|
*
|
|
* Serial Communications
|
|
*
|
|
* Settings and protocols
|
|
*
|
|
************************************/
|
|
|
|
/* Serial Communication protocol
|
|
* RAW_SERIAL // Basic serial protocol, without data change
|
|
* MKS_SERIAL // This is a MakerBase communication protocol, used with MKS
|
|
* printers and TFT, it encapsulated data in a custom protocol
|
|
*/
|
|
#define COMMUNICATION_PROTOCOL RAW_SERIAL
|
|
|
|
/* Main Serial port
|
|
* which serial ESP use to communicate to printer (ESP32 has 3 serials
|
|
* available, ESP8266 only 2) USE_SERIAL_0 //for ESP8266/32, also used by
|
|
* bootloader output, so consider to make it quiet USE_SERIAL_1 //for ESP8266/32
|
|
* USE_SERIAL_2 //for ESP32 Only
|
|
*/
|
|
// Main serial port
|
|
#define ESP_SERIAL_OUTPUT USE_SERIAL_0
|
|
|
|
/* Bridge Serial port (deprecated on esp8266 as second serial is)
|
|
* which serial ESP use to bridge to another device (ESP32 has 3 serials
|
|
* available, ESP8266 only 2) USE_SERIAL_0 //for ESP8266/32, also used by
|
|
* bootloader output, so consider to make it quiet USE_SERIAL_1 //for ESP8266/32
|
|
* USE_SERIAL_2 //for ESP32 Only\
|
|
* Comment if not used
|
|
*/
|
|
// #define ESP_SERIAL_BRIDGE_OUTPUT USE_SERIAL_1
|
|
|
|
/* Serial buffer size
|
|
* Maximum size of the serial buffer
|
|
*/
|
|
#define SERIAL_RX_BUFFER_SIZE 512
|
|
|
|
/************************************
|
|
*
|
|
* Target firmware
|
|
*
|
|
* Targeted firmware that ESP3D will communicate with
|
|
*
|
|
************************************/
|
|
/* Target firmware (default UNKNOWN_FW can be changed later in settings)
|
|
* UNKNOWN_FW
|
|
* GRBL
|
|
* MARLIN
|
|
* SMOOTHIEWARE
|
|
* REPETIER
|
|
*/
|
|
#define DEFAULT_FW UNKNOWN_FW
|
|
|
|
/************************************
|
|
*
|
|
* Radio mode of ESP3D
|
|
*
|
|
* The radio mode ESP3D communicate with the network
|
|
*
|
|
************************************/
|
|
|
|
/* Use WiFi
|
|
* Enable wifi communications
|
|
*/
|
|
#define WIFI_FEATURE
|
|
|
|
/* Use Ethernet
|
|
* Enable ethernet communications
|
|
*/
|
|
//#define ETH_FEATURE
|
|
|
|
// Ethernet type (Check ETH.h eth_phy_type_t)
|
|
// TYPE_ETH_PHY_LAN8720
|
|
// TYPE_ETH_PHY_TLK110
|
|
// TYPE_ETH_PHY_RTL8201
|
|
// TYPE_ETH_PHY_DP83848
|
|
// TYPE_ETH_PHY_DM9051
|
|
// TYPE_ETH_PHY_KSZ8041
|
|
// TYPE_ETH_PHY_KSZ8081
|
|
#define ESP3D_ETH_PHY_TYPE TYPE_ETH_PHY_LAN8720
|
|
|
|
// Ethernet board Clock mode
|
|
// MODE_ETH_CLOCK_GPIO0_IN
|
|
// MODE_ETH_CLOCK_GPIO0_OUT
|
|
// MODE_ETH_CLOCK_GPIO16_OUT
|
|
// MODE_ETH_CLOCK_GPIO17_OUT
|
|
#define ESP3D_ETH_CLK_MODE MODE_ETH_CLOCK_GPIO0_IN
|
|
|
|
// Pins of ethernet board
|
|
#define ESP3D_ETH_PHY_POWER_PIN 16
|
|
#define ESP3D_ETH_PHY_MDC_PIN 23
|
|
#define ESP3D_ETH_PHY_MDIO_PIN 18
|
|
|
|
// Address of ethernet board
|
|
#define ESP3D_ETH_PHY_ADDR 1
|
|
|
|
/* Use Bluetooth
|
|
* Enable serial bluetooth communications
|
|
*/
|
|
//#define BLUETOOTH_FEATURE
|
|
|
|
/************************************
|
|
*
|
|
* Channels of ESP3D
|
|
*
|
|
* The way ESP3D communicate
|
|
*
|
|
************************************/
|
|
|
|
/* Use Web server
|
|
* Enable http server
|
|
*/
|
|
#define HTTP_FEATURE
|
|
|
|
/* Use telnet server
|
|
* Enable telnet light (raw tcp) communications
|
|
*/
|
|
#define TELNET_FEATURE
|
|
|
|
/* Disable telnet welcome message
|
|
*/
|
|
#define DISABLE_TELNET_WELCOME_MESSAGE
|
|
|
|
/* Use Websocket server
|
|
* Enable websocket communications
|
|
*/
|
|
// #define WS_DATA_FEATURE
|
|
|
|
// Enable notifications
|
|
// Allows to send notifications to the user
|
|
#define NOTIFICATION_FEATURE
|
|
|
|
/* Notification message when online
|
|
* The message that will be sent when the ESP is online
|
|
*/
|
|
#define NOTIFICATION_ESP_ONLINE "Hi, %ESP_NAME% is now online at %ESP_IP%"
|
|
|
|
/* Notification title message
|
|
* The title of notification
|
|
*/
|
|
#define ESP_NOTIFICATION_TITLE "ESP3D Notification"
|
|
|
|
/************************************
|
|
*
|
|
* Discovery methods of ESP3D
|
|
*
|
|
* The discovery methods of ESP3D
|
|
*
|
|
************************************/
|
|
|
|
/* Use captive portal
|
|
* Enable captive portal in AP mode
|
|
*/
|
|
#define CAPTIVE_PORTAL_FEATURE
|
|
|
|
/* Use mDNS discovery
|
|
* This method need `bonjour` protocol on windows, or `avahi` on linux
|
|
*/
|
|
#define MDNS_FEATURE
|
|
|
|
/* Use Simple Service Discovery Protocol
|
|
* It is supported on Windows out of the box
|
|
*/
|
|
#define SSDP_FEATURE
|
|
|
|
/************************************
|
|
*
|
|
* SSDP Customization settings
|
|
*
|
|
* Customize your ESP3D
|
|
*
|
|
************************************/
|
|
|
|
/* Model name
|
|
* Modele name of device
|
|
*/
|
|
#define ESP_MODEL_NAME "ESP Board"
|
|
|
|
/* Model number
|
|
* Modele number of device
|
|
*/
|
|
#define ESP_MODEL_NUMBER "ESP3D 3.0"
|
|
|
|
/* Model url
|
|
* Modele url of device
|
|
*/
|
|
#define ESP_MODEL_URL "https://www.espressif.com/en/products/devkits"
|
|
|
|
/* Manufacturer name
|
|
* Manufacturer name of device
|
|
*/
|
|
#define ESP_MANUFACTURER_NAME "Espressif Systems"
|
|
|
|
/* Manufacturer url
|
|
* Manufacturer url of device
|
|
*/
|
|
#define ESP_MANUFACTURER_URL "https://www.espressif.com"
|
|
|
|
/************************************
|
|
*
|
|
* Flash filesystem
|
|
*
|
|
* Filesystem on flash
|
|
*
|
|
************************************/
|
|
|
|
/* File system type used by ESP3D
|
|
* Type of file system used by ESP3D to store files
|
|
* ESP_SPIFFS_FILESYSTEM (Deprecated)
|
|
* ESP_FAT_FILESYSTEM (ESP32 only with large partitions)
|
|
* ESP_LITTLEFS_FILESYSTEM (Default)
|
|
*/
|
|
#define FILESYSTEM_FEATURE ESP_LITTLEFS_FILESYSTEM
|
|
|
|
/* Enable date/time on files
|
|
* Set date/time on files using SNTP or last webui connection
|
|
*/
|
|
#define FILESYSTEM_TIMESTAMP_FEATURE
|
|
|
|
/************************************
|
|
*
|
|
* SD filesystem
|
|
*
|
|
* Filesystem on SD card
|
|
*
|
|
************************************/
|
|
|
|
/* SD card connection
|
|
* ESP_NO_SD //(default)
|
|
* ESP_DIRECT_SD //Only your ESP board is connected to SDCard
|
|
* ESP_SHARED_SD //Printer SD Card is also connected to ESP3D
|
|
* Does your system has SD card and how it is connected to your ESP3D
|
|
*/
|
|
//#define SD_DEVICE_CONNECTION ESP_DIRECT_SD
|
|
|
|
/* SD card library
|
|
* ESP_SD_NATIVE //esp32 / esp8266
|
|
* ESP_SDIO //esp32 only
|
|
* ESP_SDFAT2 //esp8266 / esp32
|
|
*/
|
|
//#define SD_DEVICE ESP_SDFAT2
|
|
|
|
|
|
// #define SD_CARD_TYPE ESP_FYSETC_WIFI_PRO_SDCARD
|
|
|
|
/* Sdio bit mode
|
|
* Mode used by SDIO library 1 bit / 4bits
|
|
* SD_ONE_BIT_MODE
|
|
* SD_FOUR_BIT_MODE
|
|
*/
|
|
//#define SDIO_BIT_MODE SD_ONE_BIT_MODE
|
|
|
|
/* Enable date/time on files
|
|
* Set date/time on files using SNTP or last webui connection
|
|
*/
|
|
// #define SD_TIMESTAMP_FEATURE
|
|
|
|
/************************************
|
|
*
|
|
* SD card pins
|
|
*
|
|
************************************/
|
|
|
|
/* SD card detect pin
|
|
* The pin used to detect SD card
|
|
*/
|
|
// #define ESP_SD_DETECT_PIN 4
|
|
|
|
/* SD card detect pin value
|
|
* State of SD card detect pin when card is present
|
|
*/
|
|
// #define ESP_SD_DETECT_VALUE 0
|
|
|
|
/* SD shared flag pin
|
|
* The pin used to enable SD card for ESP board
|
|
*/
|
|
// #define ESP_FLAG_SHARED_SD_PIN -1
|
|
|
|
/* SD shared flag pin value
|
|
* State of SD card shared pin for ESP board
|
|
*/
|
|
// #define ESP_FLAG_SHARED_SD_VALUE 0
|
|
|
|
/* SD card CS pin
|
|
* The pin used to select SD card in SPI mode
|
|
*/
|
|
//#define ESP_SD_CS_PIN 21
|
|
//#define ESP_SD_MISO_PIN 8
|
|
//#define ESP_SD_MOSI_PIN 9
|
|
//#define ESP_SD_SCK_PIN 7
|
|
//#define ESP_SDIO_CMD_PIN 38
|
|
//#define ESP_SDIO_D0_PIN 40
|
|
//#define ESP_SDIO_CLK_PIN 39
|
|
|
|
/************************************
|
|
*
|
|
* Remote access
|
|
*
|
|
* Remote filesystem access
|
|
*
|
|
************************************/
|
|
|
|
/* Enable global filesystem
|
|
* Allows to access to all filesystems from same location
|
|
*/
|
|
#define GLOBAL_FILESYSTEM_FEATURE
|
|
|
|
/* WebDav access
|
|
* Use WebDav to access to your filesystem
|
|
* FS_ROOT //mount all FS, need GLOBAL_FILESYSTEM_FEATURE
|
|
* FS_FLASH //mount Flash FS
|
|
* FS_SD mount SD FS
|
|
*/
|
|
#define WEBDAV_FEATURE FS_ROOT
|
|
|
|
/* FTP access
|
|
* Use FTP to access to your filesystem (1 connection only)
|
|
* FS_ROOT //mount all FS, need GLOBAL_FILESYSTEM_FEATURE
|
|
* FS_FLASH //mount Flash FS
|
|
* FS_SD //mount SD FS
|
|
*/
|
|
// #define FTP_FEATURE FS_ROOT
|
|
|
|
/************************************
|
|
*
|
|
* Reset ESP3D
|
|
*
|
|
* Reset ESP3D settings
|
|
*
|
|
************************************/
|
|
|
|
/* Enable pin reset feature
|
|
* Use a pin to reset ESP3D settings
|
|
*/
|
|
// #define PIN_RESET_FEATURE
|
|
|
|
/* Reset pin
|
|
* The pin used to reset ESP3D setting if set to low for more than 1 second at
|
|
* start
|
|
*/
|
|
//#define ESP3D_RESET_PIN 0
|
|
|
|
/************************************
|
|
*
|
|
* Update ESP3D
|
|
*
|
|
* Update ESP3D firmware
|
|
*
|
|
************************************/
|
|
|
|
/* Enable OTA
|
|
* Over The Air Update (OTA)
|
|
*/
|
|
// #define OTA_FEATURE
|
|
|
|
/* Enable Web Update
|
|
* Update firmware using WebUI, need 4MB of flash
|
|
*/
|
|
#define WEB_UPDATE_FEATURE
|
|
|
|
/* Enable SD card Update
|
|
* Update firmware and settings using file on SDCard
|
|
*/
|
|
// #define SD_UPDATE_FEATURE
|
|
|
|
/************************************
|
|
*
|
|
* Display settings
|
|
*
|
|
* Rendering screens
|
|
*
|
|
************************************/
|
|
|
|
/* Printer screen
|
|
* If your printer has a display
|
|
*/
|
|
#define PRINTER_HAS_DISPLAY
|
|
|
|
/* ESP3D screen
|
|
* Screen connected to ESP board
|
|
* OLED I2C SSD1306 128X64
|
|
* OLED_I2C_SSDSH1106_132X64
|
|
* TFT_SPI_ST7789_240X240
|
|
* TFT_SPI_ST7789_135X240
|
|
*/
|
|
// #define DISPLAY_DEVICE OLED_I2C_SSD1306_128X64
|
|
|
|
/* Flip screen
|
|
* Flip/rotate screen
|
|
*/
|
|
// #define DISPLAY_FLIP_VERTICALY
|
|
|
|
/* Display i2C address
|
|
* Wire address of display
|
|
*/
|
|
// #define DISPLAY_I2C_ADDR 0x3c
|
|
|
|
/* Display reset pin
|
|
* The pin used to reset the screen (optional)
|
|
*/
|
|
// #define DISPLAY_I2C_PIN_RST 22
|
|
|
|
/* TFT led pin
|
|
* The pin used for the backlight
|
|
*/
|
|
// #define DISPLAY_LED_PIN -1
|
|
|
|
/************************************
|
|
*
|
|
* Audio settings
|
|
*
|
|
* Buzzer feature
|
|
*
|
|
************************************/
|
|
|
|
/* Enable buzzer
|
|
* Your esp board has a passive buzzer
|
|
*/
|
|
// #define BUZZER_DEVICE
|
|
|
|
/* Buzzer pin
|
|
* The pin used for the passive buzzer
|
|
*/
|
|
// #define ESP3D_BUZZER_PIN 33
|
|
|
|
/************************************
|
|
*
|
|
* Sensor settings
|
|
*
|
|
* Sensor feature
|
|
*
|
|
************************************/
|
|
/* Sensor pin
|
|
* The pin used for the sensor
|
|
*/
|
|
// #define ESP3D_SENSOR_PIN 34
|
|
|
|
/* Sensor Unit
|
|
* Unit of the sensor result
|
|
*/
|
|
// #define SENSOR__UNIT "C"
|
|
|
|
/************************************
|
|
*
|
|
* Camera settings
|
|
*
|
|
* Connected camera
|
|
*
|
|
************************************/
|
|
|
|
/* Camera type
|
|
* CAMERA_MODEL_CUSTOM //Edit the pins in include/pins.h
|
|
* CAMERA_MODEL_ESP_EYE
|
|
* CAMERA_MODEL_M5STACK_PSRAM
|
|
* CAMERA_MODEL_M5STACK_V2_PSRAM
|
|
* CAMERA_MODEL_M5STACK_WIDE
|
|
* CAMERA_MODEL_AI_THINKER //ESP32-CAM
|
|
* CAMERA_MODEL_WROVER_KIT
|
|
* CAMERA_MODEL_ESP32_CAM_BOARD
|
|
* CAMERA_MODEL_ESP32S2_CAM_BOARD
|
|
* CAMERA_MODEL_ESP32S3_CAM_LCD
|
|
* CAMERA_MODEL_ESP32S3_EYE
|
|
* CAMERA_MODEL_XIAO_ESP32S3
|
|
* Camera connected to ESP board, only ones with PSRAM are supported
|
|
*/
|
|
// #define CAMERA_DEVICE CAMERA_MODEL_XIAO_ESP32S3
|
|
|
|
/* Flip vertically
|
|
* Flip camera vertically
|
|
*/
|
|
// #define CAMERA_DEVICE_FLIP_VERTICALY
|
|
|
|
/* Flip horizontally
|
|
* Flip camera horizontally
|
|
*/
|
|
// #define CAMERA_DEVICE_FLIP_HORIZONTALY
|
|
|
|
/************************************
|
|
*
|
|
* Levels of security
|
|
*
|
|
* How commands are allowed to be sent to ESP3D
|
|
*
|
|
************************************/
|
|
|
|
/* Enable serial commands
|
|
* Allow commands to be sent to ESP3D via serial port
|
|
*/
|
|
#define SERIAL_COMMAND_FEATURE
|
|
|
|
/* Allow remote access by enabling cross origin access
|
|
* check https://developer.mozilla.org/en-US/docs/Web/HTTP/CORS
|
|
* this should be enabled only in specific cases
|
|
* like show the camera in web page different than device web server
|
|
* /if you do not know what is that then better left it commented
|
|
* Allow to show the camera in web page different than device web server
|
|
*/
|
|
// #define ESP_ACCESS_CONTROL_ALLOW_ORIGIN
|
|
|
|
/* Enable authentication
|
|
* Force usage of authentication for commands
|
|
*/
|
|
// #define AUTHENTICATION_FEATURE
|
|
|
|
/************************************
|
|
*
|
|
* Additional features
|
|
*
|
|
* Extra settings
|
|
*
|
|
************************************/
|
|
|
|
/* Enable direct control pin
|
|
* Controls pins using [ESP201]
|
|
*/
|
|
#define DIRECT_PIN_FEATURE
|
|
|
|
/************************************
|
|
*
|
|
* Scripting settings
|
|
*
|
|
* Scripting on ESP3D
|
|
*
|
|
************************************/
|
|
/* Enable Autostart
|
|
* Commands to run on startup
|
|
* Separate commands with ';' or use file
|
|
*/
|
|
// #define ESP_AUTOSTART_SCRIPT "M117 Mounting SD;M21"
|
|
// #define ESP_AUTOSTART_SCRIPT_FILE "autoscript.gco"
|
|
|
|
/* Enable lua interpreter
|
|
* Allow to use lua interpreter on ESP3D on ESP32/S2/S3/C3 only
|
|
*/
|
|
//#define ESP_LUA_INTERPRETER_FEATURE
|
|
|
|
/* Hook when got IP
|
|
* Commands to run on event
|
|
* Separate commands with ';'
|
|
*/
|
|
#define ESP_GOT_IP_HOOK "[ESP212]IP:%ESP_IP%"
|
|
|
|
/* Hook when got date time
|
|
* Commands to run on event
|
|
* Separate commands with ';'
|
|
*/
|
|
#define ESP_GOT_DATE_TIME_HOOK "[ESP212]DATE:%ESP_DATETIME%"
|
|
|
|
/* Gcode Host Feature
|
|
* This feature allows to process Gcode files like macros.
|
|
*/
|
|
#define GCODE_HOST_FEATURE
|
|
|
|
/* Settings location
|
|
* SETTINGS_IN_EEPROM //ESP8266/ESP32
|
|
* SETTINGS_IN_PREFERENCES //ESP32 only
|
|
* Location where ESP3D will save settings
|
|
*/
|
|
#define ESP_SAVE_SETTINGS SETTINGS_IN_EEPROM
|
|
|
|
/* Add serial task
|
|
* ESP32 need to add a task to handle serial communication
|
|
*/
|
|
#define SERIAL_INDEPENDANT_TASK
|
|
|
|
/************************************
|
|
*
|
|
* Development setting
|
|
* Do not modify them for production
|
|
************************************/
|
|
|
|
// Enable log mode
|
|
// Do not do this when connected to printer !!!
|
|
// be noted all upload may failed if enabled
|
|
// LOG_OUTPUT_SERIAL0
|
|
// LOG_OUTPUT_SERIAL1
|
|
// LOG_OUTPUT_SERIAL2
|
|
// LOG_OUTPUT_TELNET
|
|
// LOG_OUTPUT_WEBSOCKET
|
|
//#define ESP_LOG_FEATURE LOG_OUTPUT_SERIAL0
|
|
|
|
//#define ESP3D_DEBUG_LEVEL LOG_LEVEL_DEBUG
|
|
|
|
#ifdef ESP_LOG_FEATURE
|
|
#define LOG_ESP3D_BAUDRATE 115200
|
|
#define LOG_ESP3D_OUTPUT_PORT 8000
|
|
#endif // ESP_LOG_FEATURE
|
|
|
|
// Enable benchmark report in dev console
|
|
// #define ESP_BENCHMARK_FEATURE
|
|
|
|
// Disable sanity check at compilation
|
|
// #define ESP_NO_SANITY_CHECK
|
|
|
|
/************************************
|
|
*
|
|
* Sanity checks
|
|
* Do not modify
|
|
************************************/
|
|
|
|
#if defined(ESP_GOT_DATE_TIME_HOOK) || defined(SD_TIMESTAMP_FEATURE) || \
|
|
defined(FILESYSTEM_TIMESTAMP_FEATURE)
|
|
#define TIMESTAMP_FEATURE
|
|
#endif // SD_TIMESTAMP_FEATURE || FILESYSTEM_TIMESTAMP_FEATURE
|
|
|
|
#if defined(PRINTER_HAS_DISPLAY)
|
|
#define HAS_SERIAL_DISPLAY ""
|
|
#endif // PRINTER_HAS_DISPLAY
|
|
|
|
#if defined(CAMERA_DEVICE)
|
|
#if CAMERA_DEVICE == CAMERA_MODEL_ESP32_CAM_BOARD || \
|
|
CAMERA_DEVICE == CAMERA_MODEL_ESP32S2_CAM_BOARD
|
|
#define USE_BOARD_HEARDER 1
|
|
#endif // CAMERA_DEVICE==CAMERA_MODEL_ESP32_CAM_BOARD ||
|
|
// CAMERA_DEVICE==CAMERA_MODEL_ESP32S2_CAM_BOARD
|
|
#endif // CAMERA_DEVICE
|
|
|
|
#if !defined(WIFI_FEATURE) && !defined(ETH_FEATURE)
|
|
#undef HTTP_FEATURE
|
|
#undef TELNET_FEATURE
|
|
#undef WEBDAV_FEATURE
|
|
#undef FTP_FEATURE
|
|
#undef WEB_UPDATE_FEATURE
|
|
#undef CAPTIVE_PORTAL_FEATURE
|
|
#undef SSDP_FEATURE
|
|
#undef MDNS_FEATURE
|
|
#undef NOTIFICATION_FEATURE
|
|
#endif
|
|
|
|
#endif //_CONFIGURATION_H
|