mirror of
https://git.mirrors.martin98.com/https://github.com/luc-github/ESP3D.git
synced 2025-08-04 14:20:44 +08:00
93312ff8b5
* Update WebSocket library * Update SSDP library * Update TFT_eSPI library * Update EspLuaEngine library * Update SDFat library * Change to pioarduino * Make ESP3DMessageFIFO and ESP3DMessage more thread safe * Fix sanity checks for BT * Add some C6 support * Refactor ethernet code * Split Ethernet Sta / WiFi sta ESP Commands and settings * Simplify wait and wdtFeed code * Set C3 with 4MB by default in platformio.ini * Apply Disable brown out only on ESP32 to avoid crash e.g:ESP32S3 * Add missing entries in platformio.ini
57 lines
2.2 KiB
C
57 lines
2.2 KiB
C
// ST7789 135 x 240 display with no chip select line
|
|
#define USER_SETUP_ID 135
|
|
|
|
#define ST7789_DRIVER // Configure all registers
|
|
|
|
#define TFT_WIDTH 135
|
|
#define TFT_HEIGHT 240
|
|
|
|
#define CGRAM_OFFSET // Library will add offsets required
|
|
|
|
//#define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
|
|
//#define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
|
|
|
|
//#define TFT_INVERSION_ON
|
|
//#define TFT_INVERSION_OFF
|
|
|
|
// DSTIKE stepup
|
|
//#define TFT_DC 23
|
|
//#define TFT_RST 32
|
|
//#define TFT_MOSI 26
|
|
//#define TFT_SCLK 27
|
|
|
|
// Generic ESP32 setup
|
|
//#define TFT_MISO 19
|
|
//#define TFT_MOSI 23
|
|
//#define TFT_SCLK 18
|
|
//#define TFT_CS -1 // Not connected
|
|
//#define TFT_DC 2
|
|
//#define TFT_RST 4 // Connect reset to ensure display initialises
|
|
|
|
// For NodeMCU - use pin numbers in the form PIN_Dx where Dx is the NodeMCU pin designation
|
|
#define TFT_CS -1 // Define as not used
|
|
#define TFT_DC PIN_D1 // Data Command control pin
|
|
//#define TFT_RST PIN_D4 // TFT reset pin (could connect to NodeMCU RST, see next line)
|
|
#define TFT_RST -1 // TFT reset pin connect to NodeMCU RST, must also then add 10K pull down to TFT SCK
|
|
|
|
|
|
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
|
|
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
|
|
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
|
|
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
|
|
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
|
|
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
|
|
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
|
|
|
|
#define SMOOTH_FONT
|
|
|
|
|
|
// #define SPI_FREQUENCY 27000000
|
|
#define SPI_FREQUENCY 40000000
|
|
|
|
#define SPI_READ_FREQUENCY 20000000
|
|
|
|
#define SPI_TOUCH_FREQUENCY 2500000
|
|
|
|
// #define SUPPORT_TRANSACTIONS
|