mirror of
https://git.mirrors.martin98.com/https://github.com/luc-github/ESP3D.git
synced 2025-08-03 10:50:37 +08:00
1cf2744bad
Add EEPROM version Check Update embedded page content and build process Move check sum ESP commands from ESP6XX to ESP5XX to let Notifications use ESP6XX Update command.txt with latest commands
170 lines
5.1 KiB
Plaintext
170 lines
5.1 KiB
Plaintext
* Change STA SSID
|
|
[ESP100]<SSID>
|
|
if authentication is on, need admin password
|
|
[ESP100]<SSID>pwd=<admin password>
|
|
|
|
* Change STA Password
|
|
[ESP101]<Password>
|
|
if authentication is on, need admin password
|
|
[ESP101]<Password>pwd=<admin password>
|
|
|
|
* Change Hostname
|
|
[ESP102]<hostname>
|
|
if authentication is on, need admin password
|
|
[ESP102]<hostname>pwd=<admin password>
|
|
|
|
* Change Wifi mode (STA/AP)
|
|
[ESP103]<mode>
|
|
if authentication is on, need admin password
|
|
[ESP103]<mode>pwd=<admin password>
|
|
|
|
* Change STA IP mode (DHCP/STATIC)
|
|
[ESP104]<mode>
|
|
if authentication is on, need admin password
|
|
[ESP104]<mode>pwd=<admin password>
|
|
|
|
* Change AP SSID
|
|
[ESP105]<SSID>
|
|
if authentication is on, need admin password
|
|
[ESP105]<SSID>pwd=<admin password>
|
|
|
|
* Change AP Password
|
|
[ESP106]<Password>
|
|
if authentication is on, need admin password
|
|
[ESP106]<Password>pwd=<admin password>
|
|
|
|
* Change AP IP mode (DHCP/STATIC)
|
|
[ESP107]<mode>
|
|
if authentication is on, need admin password
|
|
[ESP107]<mode>pwd=<admin password>
|
|
|
|
* Set wifi on/off
|
|
[ESP110]<state>
|
|
state can be ON, OFF, RESTART
|
|
if authentication is on, need admin password
|
|
[ESP110]<state>pwd=<admin password>
|
|
|
|
* Get current IP
|
|
[ESP111]<header answer>
|
|
|
|
* Get hostname
|
|
[ESP112]<header answer>
|
|
|
|
*Get/Set pin value
|
|
[ESP201]P<pin> V<value> [PULLUP=YES RAW=YES ANALOG=NO ANALOG_RANGE=255 CLEARCHANNELS=NO]pwd=<admin password>
|
|
if no V<value> get P<pin> value
|
|
if V<value> 0/1 set INPUT_PULLUP value, but for GPIO16 INPUT_PULLDOWN_16
|
|
GPIO1 and GPIO3 cannot be used as they are used for serial
|
|
if PULLUP=YES set input pull up, if not set input
|
|
if RAW=YES do not set pinmode just read value
|
|
|
|
* Output to oled column C and line L
|
|
[ESP210]C=<col> L=<line> T=<Text>
|
|
|
|
* Output to oled line 1
|
|
[ESP211]<Text>
|
|
|
|
* Output to oled line 2
|
|
[ESP212]<Text>
|
|
|
|
* Output to oled line 3
|
|
[ESP213]<Text>
|
|
|
|
* Output to oled line 4
|
|
[ESP214]<Text>
|
|
|
|
* Give EEPROM Version detected
|
|
[ESP300]
|
|
|
|
*Get full EEPROM settings content
|
|
but do not give any passwords
|
|
can filter if only need wifi or printer
|
|
[ESP400]<network/printer>
|
|
|
|
*Set EEPROM setting
|
|
position in EEPROM, type: B(byte), I(integer/long), S(string), A(IP address / mask)
|
|
[ESP401]P=<position> T=<type> V=<value> pwd=<user/admin password>
|
|
|
|
Positions:
|
|
* EP_WIFI_MODE 0 //1 byte = flag
|
|
* EP_STA_SSID 1 //33 bytes 32+1 = string ; warning does not support multibyte char like chinese
|
|
* EP_STA_PASSWORD 34 //65 bytes 64 +1 = string ;warning does not support multibyte char like chinese
|
|
* EP_STA_IP_MODE 99 //1 byte = flag
|
|
* EP_STA_IP_VALUE 100 //4 bytes xxx.xxx.xxx.xxx
|
|
* EP_STA_MASK_VALUE 104 //4 bytes xxx.xxx.xxx.xxx
|
|
* EP_STA_GATEWAY_VALUE 108 //4 bytes xxx.xxx.xxx.xxx
|
|
* EP_BAUD_RATE 112 //4 bytes = int
|
|
* EP_STA_PHY_MODE 116 //1 byte = flag
|
|
* EP_SLEEP_MODE 117 //1 byte = flag
|
|
* EP_CHANNEL 118 //1 byte = flag
|
|
* EP_AUTH_TYPE 119 //1 byte = flag
|
|
* EP_SSID_VISIBLE 120 //1 byte = flag
|
|
* EP_WEB_PORT 121 //4 bytes = int
|
|
* EP_DATA_PORT 125 //4 bytes = int
|
|
* EP_OUTPUT_FLAG 129 //1 bytes = flag
|
|
* EP_HOSTNAME 130//33 bytes 32+1 = string ; warning does not support multibyte char like chinese
|
|
* EP_DHT_INTERVAL 164//4 bytes = int
|
|
* EP_FREE_INT2 168//4 bytes = int
|
|
* EP_FREE_INT3 172//4 bytes = int
|
|
* EP_ADMIN_PWD 176//21 bytes 20+1 = string ; warning does not support multibyte char like chinese
|
|
* EP_USER_PWD 197//21 bytes 20+1 = string ; warning does not support multibyte char like chinese
|
|
* EP_AP_SSID 218 //33 bytes 32+1 = string ; warning does not support multibyte char like chinese
|
|
* EP_AP_PASSWORD 251 //65 bytes 64 +1 = string ;warning does not support multibyte char like chinese
|
|
* EP_AP_IP_VALUE 316 //4 bytes xxx.xxx.xxx.xxx
|
|
* EP_AP_MASK_VALUE 320 //4 bytes xxx.xxx.xxx.xxx
|
|
* EP_AP_GATEWAY_VALUE 324 //4 bytes xxx.xxx.xxx.xxx
|
|
* EP_AP_IP_MODE 329 //1 byte = flag
|
|
* EP_AP_PHY_MODE 330 //1 byte = flag
|
|
* EP_FREE_STRING1 331 //129 bytes 128+1 = string ; warning does not support multibyte char like chinese
|
|
* EP_DHT_TYPE 460 //1 bytes = flag
|
|
* EP_TARGET_FW 461 //1 bytes = flag
|
|
|
|
*Get available AP list (limited to 30)
|
|
output is JSON or plain text according parameter
|
|
[ESP410]<plain>
|
|
|
|
*Get current settings of ESP3D
|
|
output is JSON or plain text according parameter
|
|
[ESP420]<plain>
|
|
|
|
* Get/Set ESP mode
|
|
cmd can be RESET, SAFEMODE, CONFIG, RESTART
|
|
[ESP444]<cmd>
|
|
if authentication is on, need admin password for RESET, RESTART and SAFEMODE
|
|
[ESP444]<cmd>pwd=<admin password>
|
|
|
|
* Send GCode with check sum caching right line numbering
|
|
[ESP500]<gcode>
|
|
|
|
* Send line checksum
|
|
[ESP501]<line>
|
|
|
|
* Change / Reset user password
|
|
[ESP555]<password>pwd=<admin password>
|
|
if no password set it use default one
|
|
|
|
* Send Notification
|
|
[ESP600]msg [pwd=<admin password>]
|
|
|
|
* Set/Get Notification settings
|
|
[ESP610]type=<NONE/PUSHOVER/EMAIL/LINE> T1=<token1> T2=<token2> TS=<Settings> [pwd=<admin password>]
|
|
Get will give type and settings only not the protected T1/T2
|
|
|
|
* Read SPIFFS file and send each line to serial
|
|
[ESP700]<filename>
|
|
|
|
* Format SPIFFS
|
|
[ESP710]FORMAT pwd=<admin password>
|
|
|
|
* SPIFFS total size and used size
|
|
[ESP720]<header answer>
|
|
|
|
* Get fw version and basic information
|
|
[ESP800]<header answer>
|
|
|
|
* Get fw target
|
|
[ESP801]<header answer>
|
|
|
|
|
|
|