diff --git a/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json index 7315b9924d..2f832482d0 100644 --- a/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json +++ b/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json @@ -40,12 +40,6 @@ "extruder_clearance_height_to_lid": "100", "extruder_clearance_height_to_rod": "32", "extruder_clearance_radius": "50", - "machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 E3 F300\nG1 E-10 F9000\nM84 ;steppers off\nG90 ;absolute positioning\nM107 ; turn off fan\nPRINT_END", - "machine_max_speed_e": [ - "60", - "120" - ], - "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\nG1 Z1 F9000 ;move the platform to 15mm\nG92 E0\nG1 F500 E10\nG0 X0 Y0\nG92 E0 ;zero the extruded length\nG1 F1000 Y100 E20\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing...", "min_layer_height": [ "0.05" ], @@ -72,27 +66,15 @@ "deretraction_speed": [ "30" ], - "machine_max_speed_x": [ - "500", - "500" - ], - "machine_max_speed_y": [ - "500", - "500" - ], "retraction_length": [ "1" ], "retraction_speed": [ "30" - ], - "z_hop_types": [ - "Spiral Lift" ], "default_filament_profile": [ - "Generic PLA @System" + "MM Generic PLA" ], - "is_custom_defined": "0", "machine_max_acceleration_e": [ "10000" ], @@ -117,14 +99,14 @@ "0.4" ], "machine_max_speed_z": [ - "10", + "12", "12" ], "printable_area": [ "0x0", "310x0", - "310x310", - "0x310" + "310x306", + "0x306" ], "thumbnails": [ "310x310" @@ -132,5 +114,23 @@ "z_hop": [ "0.2" ], - "version": "2.0.0.0" -} \ No newline at end of file + "is_custom_defined": "0", + "machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nM83\nG1 E-1 F1200 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 F300 \nG90 ;absolute positioning\nG1 X100 Y0 F6000\nG1 E-4 F1200\nM84 ;steppers off\nM107 ; turn off fan\nPRINT_END", + "machine_max_speed_e": [ + "100", + "120" + ], + "machine_max_speed_x": [ + "1000", + "500" + ], + "machine_max_speed_y": [ + "1000", + "500" + ], + "machine_start_gcode": "G0 Z3 F300\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\nG0 Z5 F300\nG1 X0 Y100 F6000\nG92 E0\nG0 Z0.5 F300\nG1 F1000 Y0 E15\nG1 F1000 X100 E25\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing...", + "version": "2.1.0.1", + "z_hop_types": [ + "Slope Lift" + ] +} diff --git a/resources/profiles/MagicMaker/machine/MM hj SK 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM hj SK 0.4 nozzle.json index 45d8bbdcc7..7837dcc7d9 100644 --- a/resources/profiles/MagicMaker/machine/MM hj SK 0.4 nozzle.json +++ b/resources/profiles/MagicMaker/machine/MM hj SK 0.4 nozzle.json @@ -11,7 +11,6 @@ "0.4" ], "gcode_flavor": "klipper", - "is_custom_defined": "0", "machine_pause_gcode": "PAUSE", "printable_area": [ "0x0", @@ -51,7 +50,6 @@ "extruder_clearance_height_to_lid": "100", "extruder_clearance_height_to_rod": "32", "extruder_clearance_radius": "50", - "machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 E3 F300\nG1 E-10 F9000\nM84 ;steppers off\nG90 ;absolute positioning\nM107 ; turn off fan\nPRINT_END", "machine_max_acceleration_e": [ "6000" ], @@ -59,7 +57,6 @@ "60", "120" ], - "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\nG1 Z1 F9000 ;move the platform to 15mm\nG92 E0\nG1 F500 E10\nG0 X0 Y0\nG92 E0 ;zero the extruded length\nG1 F1000 Y100 E20\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing...", "min_layer_height": [ "0.05" ], @@ -127,12 +124,15 @@ ], "z_hop": [ "0.4" - ], - "z_hop_types": [ - "Spiral Lift" ], "default_filament_profile": [ "Generic PLA @System" ], - "version": "2.0.0.0" -} \ No newline at end of file + "is_custom_defined": "0", + "machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nM83\nG1 E-1 F1200 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 F300 \nG90 ;absolute positioning\nG1 X100 Y0 F6000\nG1 E-4 F1200\nM84 ;steppers off\nM107 ; turn off fan\nPRINT_END", + "machine_start_gcode": "G0 Z3 F300\nG90 ;absolute positioning\n;GZBC\n;G28 ;Home\nM190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\n;BED_MESH_CLEAR ;touch\n;BLTOUCH_DEBUG COMMAND=reset ;touch\n;BED_MESH_CALIBRATE ;touch\n;BED_MESH_CALIBRATE METHOD=scan SCAN_MODE=rapid ;eddy\n;G1 Z5 F300;TB\n;G1 X0 Y0 ;TB\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28;Home\nG0 Z5 F300\nG1 X0 Y100 F6000\nG92 E0\nG0 Z0.5 F300\nG1 F1000 Y0 E15\nG1 F1000 X100 E25\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing...", + "version": "2.1.0.1", + "z_hop_types": [ + "Slope Lift" + ] +} diff --git a/resources/profiles/MagicMaker/machine/MM hqs SF 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM hqs SF 0.4 nozzle.json index 299b558df7..49adbb7c8b 100644 --- a/resources/profiles/MagicMaker/machine/MM hqs SF 0.4 nozzle.json +++ b/resources/profiles/MagicMaker/machine/MM hqs SF 0.4 nozzle.json @@ -48,7 +48,6 @@ "extruder_clearance_height_to_lid": "100", "extruder_clearance_height_to_rod": "32", "extruder_clearance_radius": "50", - "machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 E3 F300\nG1 E-10 F9000\nM84 ;steppers off\nG90 ;absolute positioning\nM107 ; turn off fan\nPRINT_END", "machine_max_acceleration_e": [ "6000" ], @@ -57,7 +56,6 @@ "120" ], "machine_pause_gcode": "M601", - "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\nG1 Z1 F9000 ;move the platform to 15mm\nG92 E0\nG1 F500 E10\nG0 X0 Y0\nG92 E0 ;zero the extruded length\nG1 F1000 Y100 E20\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing...", "min_layer_height": [ "0.05" ], @@ -89,7 +87,6 @@ "deretraction_speed": [ "30" ], - "is_custom_defined": "0", "machine_max_acceleration_extruding": [ "5000", "1500" @@ -98,14 +95,6 @@ "5000", "1500" ], - "machine_max_acceleration_x": [ - "20000", - "3000" - ], - "machine_max_acceleration_y": [ - "20000", - "3000" - ], "machine_max_jerk_z": [ "2", "0.4" @@ -126,12 +115,24 @@ ], "z_hop": [ "0.4" - ], - "z_hop_types": [ - "Spiral Lift" ], "default_filament_profile": [ "Generic PLA @System" ], - "version": "2.0.0.0" -} \ No newline at end of file + "gcode_flavor": "marlin2", + "is_custom_defined": "0", + "machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nM83\nG1 E-1 F1200 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 F300 \nG90 ;absolute positioning\nG1 X100 Y0 F6000\nG1 E-4 F1200\nM84 ;steppers off\nM107 ; turn off fan\nPRINT_END", + "machine_max_acceleration_x": [ + "10000", + "3000" + ], + "machine_max_acceleration_y": [ + "10000", + "3000" + ], + "machine_start_gcode": "G0 Z3 F300\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\n ;G29\nG0 Z5 F300\nG1 X0 Y100 F6000\nG92 E0\nG0 Z0.5 F300\nG1 F1000 Y0 E15\nG1 F1000 X100 E25\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing...", + "version": "2.1.0.1", + "z_hop_types": [ + "Slope Lift" + ] +} diff --git a/resources/profiles/MagicMaker/machine/MM hqs hj 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM hqs hj 0.4 nozzle.json index c968ba6b44..35f3510ce0 100644 --- a/resources/profiles/MagicMaker/machine/MM hqs hj 0.4 nozzle.json +++ b/resources/profiles/MagicMaker/machine/MM hqs hj 0.4 nozzle.json @@ -59,8 +59,6 @@ "extruder_clearance_height_to_lid": "100", "extruder_clearance_height_to_rod": "32", "extruder_clearance_radius": "50", - "is_custom_defined": "0", - "machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 E3 F300\nG1 E-10 F9000\nM84 ;steppers off\nG90 ;absolute positioning\nM107 ; turn off fan\nPRINT_END", "machine_max_acceleration_e": [ "6000" ], @@ -77,7 +75,6 @@ "500" ], "machine_pause_gcode": "M601", - "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\nG1 Z1 F9000 ;move the platform to 15mm\nG92 E0\nG1 F500 E10\nG0 X0 Y0\nG92 E0 ;zero the extruded length\nG1 F1000 Y100 E20\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing...", "min_layer_height": [ "0.05" ], @@ -119,11 +116,20 @@ "0.2", "0.4" ], + "z_hop": [ + "0.2" + ], "thumbnails": [ "220x220" ], "default_filament_profile": [ "Generic PLA @System" ], - "version": "2.0.0.0" -} \ No newline at end of file + "z_hop_types": [ + "Slope Lift" + ], + "is_custom_defined": "0", + "machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nM83\nG1 E-1 F1200 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 F300 \nG90 ;absolute positioning\nG1 X100 Y0 F6000\nG1 E-4 F1200\nM84 ;steppers off\nM107 ; turn off fan\nPRINT_END", + "machine_start_gcode": "G0 Z3 F300\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\n ;G29\nG0 Z5 F300\nG1 X0 Y100 F6000\nG92 E0\nG0 Z0.5 F300\nG1 F1000 Y0 E15\nG1 F1000 X100 E25\nG92 E0 ;zero the extruded length again\nG1 F9000\nM117 Printing...", + "version": "2.1.0.1" +} diff --git a/resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json index e6b4d0377f..0a44f1e2e3 100644 --- a/resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json +++ b/resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json @@ -10,18 +10,25 @@ "nozzle_diameter": [ "0.4" ], + "printable_area": [ + "0x0", + "125x0", + "125x125", + "0x125" + ], + "printable_height": "160", "auxiliary_fan": "0", "machine_max_acceleration_travel": [ "3000", "3000" ], "machine_max_acceleration_z": [ - "500", - "500" + "100", + "100" ], "machine_max_speed_z": [ - "12", - "12" + "5", + "5" ], "max_layer_height": [ "0.3" @@ -30,26 +37,28 @@ "retract_before_wipe": [ "70%" ], + "wipe_distance": [ + "1" + ], "single_extruder_multi_material": "1", "change_filament_gcode": "", "scan_first_layer": "0", "cooling_tube_length": "20", "cooling_tube_retraction": "60", - "deretraction_speed": [ - "25" - ], "extruder_clearance_height_to_lid": "100", "extruder_clearance_height_to_rod": "32", "extruder_clearance_radius": "50", - "machine_max_jerk_e": [ - "5", - "2.5" + "machine_max_acceleration_e": [ + "4000" ], "machine_max_speed_e": [ "60", "120" ], "machine_pause_gcode": "M601", + "min_layer_height": [ + "0.1" + ], "nozzle_type": "brass", "parking_pos_retraction": "22", "retract_length_toolchange": [ @@ -58,32 +67,9 @@ "retraction_minimum_travel": [ "1" ], - "retraction_speed": [ - "25" - ], - "default_filament_profile": [ - "Generic PLA @System" - ], - "is_custom_defined": "0", - "machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG28 X0\nG0 Y120\nG1 E-10 F9000\nM84 ;steppers off\nG90 ;absolute positioning\nPRINT_END", - "machine_max_acceleration_e": [ - "4000" - ], - "machine_max_acceleration_extruding": [ - "2000", - "1500" - ], - "machine_max_acceleration_retracting": [ - "2000", - "1500" - ], - "machine_max_acceleration_x": [ - "2000", - "3000" - ], - "machine_max_acceleration_y": [ - "2000", - "3000" + "machine_max_jerk_e": [ + "2.5", + "2.5" ], "machine_max_jerk_x": [ "9", @@ -93,8 +79,22 @@ "9", "20" ], + "thumbnails": [ + "125x125" + ], + "deretraction_speed": [ + "25" + ], + "machine_max_acceleration_extruding": [ + "2000", + "1500" + ], + "machine_max_acceleration_retracting": [ + "2000", + "1500" + ], "machine_max_jerk_z": [ - "0.2", + "2", "0.4" ], "machine_max_speed_x": [ @@ -105,25 +105,32 @@ "200", "500" ], - "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\nG0 Z1\nG0 X0 Y0\nG92 E0\nG0 Z0.5\nG1 F1000 Y100 E20\nG92 E0\nM117 Printing...", - "min_layer_height": [ - "0.1" - ], - "printable_area": [ - "0x0", - "125x0", - "125x125", - "0x125" - ], - "printable_height": "160", "retraction_length": [ "2" ], - "thumbnails": [ - "120x120" + "retraction_speed": [ + "25" ], - "wipe_distance": [ - "1" + "z_hop": [ + "0.4" ], - "version": "2.0.0.0" -} \ No newline at end of file + "default_filament_profile": [ + "Generic PLA @System" + + ], + "is_custom_defined": "0", + "machine_max_acceleration_x": [ + "2000", + "3000" + ], + "machine_max_acceleration_y": [ + "2000", + "3000" + ], + "machine_start_gcode": "G0 Z3 F300\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\n;G29\nG0 Z5 F300\nG1 X0 Y50 F6000\nG92 E0\nG0 Z0.5 F300\nG1 F1000 Y0 E10\nG1 F1000 X50 E18\nG92 E0\nM117 Printing...", + "machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 \nM83\nG1 E-1 F600 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z1 F600\nG90 ;absolute positioning\nG1 X0 Y120 F6000\nG1 E-4 F1200\nM107 ; turn off fan\nM84 ;steppers off\nPRINT_END", + "version": "2.1.0.1", + "z_hop_types": [ + "Slope Lift" + ] +}