fix pot and lang after PR (#1001)

bbl/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-05-06 13:46+0200\n"
+"POT-Creation-Date: 2023-05-08 16:37+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -3194,6 +3194,9 @@ msgstr ""
 msgid "Pressure advance"
 msgstr ""
 
+msgid "Retraction test"
+msgstr ""
+
 msgid "Max flowrate"
 msgstr ""
 
@@ -5158,7 +5161,7 @@ msgstr ""
 msgid "Cooling Fan"
 msgstr ""
 
-msgid "Fan speedup time"
+msgid "Fan speed-up time"
 msgstr ""
 
 msgid "Extruder Clearance"
@@ -7044,6 +7047,14 @@ msgstr ""
 msgid "Travel speed of initial layer"
 msgstr ""
 
+msgid "Number of slow layers"
+msgstr ""
+
+msgid ""
+"The first few layers are printed slower than normal. The speed is gradually "
+"increased in a linear fashion over the specified number of layers."
+msgstr ""
+
 msgid "Initial layer nozzle temperature"
 msgstr ""
 
@@ -7053,6 +7064,24 @@ msgstr ""
 msgid "Full fan speed at layer"
 msgstr ""
 
+msgid ""
+"Fan speed will be ramped up linearly from zero at layer "
+"\"close_fan_the_first_x_layers\" to maximum at layer "
+"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
+"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
+"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+msgstr ""
+
+msgid "Support interface fan speed"
+msgstr ""
+
+msgid ""
+"This fan speed is enforced during all support interfaces, to be able to "
+"weaken their bonding with a high fan speed.\n"
+"Set to -1 to disable this override.\n"
+"Can only be overriden by disable_fan_first_layers."
+msgstr ""
+
 msgid ""
 "Randomly jitter while printing the wall, so that the surface has a rough "
 "look. This setting controls the fuzzy position"
@@ -7158,9 +7187,6 @@ msgstr ""
 msgid "Enable this option if machine has auxiliary part cooling fan"
 msgstr ""
 
-msgid "Fan Speedup Time"
-msgstr ""
-
 msgid ""
 "Start the fan this number of seconds earlier than its target start time (you "
 "can use fractional seconds). It assumes infinite acceleration for this time "
@@ -8655,6 +8681,15 @@ msgid ""
 "end > start + step)"
 msgstr ""
 
+msgid "Start retraction length: "
+msgstr ""
+
+msgid "End retraction length: "
+msgstr ""
+
+msgid "mm/mm"
+msgstr ""
+
 #: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid "3D Scene Operations\nDid you know how to control view and object/part selection with mouse and touchpanel in the 3D scene?"
 msgstr ""
@@ -8754,3 +8789,4 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Improve strength]
 msgid "Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?"
 msgstr ""
+

bbl/i18n/de/OrcaSlicer_de.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-05-06 13:46+0200\n"
+"POT-Creation-Date: 2023-05-08 16:37+0200\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -3469,6 +3469,10 @@ msgstr "Durchflussrate"
 msgid "Pressure advance"
 msgstr "Pressure advance"
 
+#, fuzzy
+msgid "Retraction test"
+msgstr "Rückzugslängen Test"
+
 msgid "Max flowrate"
 msgstr "Maximale Durchflussrate"
 
@@ -5666,8 +5670,8 @@ msgid "Cooling Fan"
 msgstr "Kühlung"
 
 #, fuzzy
-msgid "Fan speedup time"
+msgid "Fan speed-up time"
-msgstr "Lüftergeschwindigkeit"
+msgstr "Lüfter Beschleunigungszeit"
 
 msgid "Extruder Clearance"
 msgstr "Freiraum des Extruders"
@@ -7858,6 +7862,17 @@ msgstr "Bewegung"
 msgid "Travel speed of initial layer"
 msgstr "Bewegungsgeschwindigkeit der ersten Schicht"
 
+#, fuzzy
+msgid "Number of slow layers"
+msgstr "Anzahl der lansamen Schichten"
+
+msgid ""
+"The first few layers are printed slower than normal. The speed is gradually "
+"increased in a linear fashion over the specified number of layers."
+msgstr ""
+"Die ersten paar Schichten werden langsamer als normal gedruckt. Die Geschwindigkeit"
+"wird allmählich linear über die angegebene Anzahl von Schichten erhöht."
+
 msgid "Initial layer nozzle temperature"
 msgstr "Düsentemperatur für die erste Schicht"
 
@@ -7869,6 +7884,33 @@ msgstr ""
 msgid "Full fan speed at layer"
 msgstr "Volle Lüfterdrehzahl ab Schicht"
 
+msgid ""
+"Fan speed will be ramped up linearly from zero at layer "
+"\"close_fan_the_first_x_layers\" to maximum at layer "
+"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
+"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
+"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+msgstr ""
+"Die Lüftergeschwindigkeit wird linear von Null bei der Schicht 
+"\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht \"full_fan_speed_layer\" erhöht."
+"\"full_fan_speed_layer\" wird ignoriert, wenn es niedriger ist als \"close_fan_the_first_x_layers\","
+"in diesem Fall läuft der Lüfter bei Schicht \"close_fan_the_first_x_layers\"
+" + 1 mit maximal zulässiger Geschwindigkeit."
+
+#, fuzzy
+msgid "Support interface fan speed"
+msgstr "Stützstruktur-Schnittstelle"
+
+msgid ""
+"This fan speed is enforced during all support interfaces, to be able to "
+"weaken their bonding with a high fan speed.\n"
+"Set to -1 to disable this override.\n"
+"Can only be overriden by disable_fan_first_layers."
+msgstr ""
+"Diese Lüftergeschwindigkeit wird während der Stützstruktur verwendet.\n"
+"Setzen Sie es auf -1, um dies zu deaktivieren.\n"
+"Kann nur durch disable_fan_first_layers außer Kraft gesetzt werden."
+
 msgid ""
 "Randomly jitter while printing the wall, so that the surface has a rough "
 "look. This setting controls the fuzzy position"
@@ -7997,10 +8039,6 @@ msgstr ""
 "Aktivieren Sie diese Option, wenn die Maschine über ein zusätzliches "
 "Kühlgebläse verfügt"
 
-#, fuzzy
-msgid "Fan Speedup Time"
-msgstr "Lüftergeschwindigkeit: "
-
 msgid ""
 "Start the fan this number of seconds earlier than its target start time (you "
 "can use fractional seconds). It assumes infinite acceleration for this time "
@@ -9805,6 +9843,17 @@ msgstr ""
 "Start > 10 Schrittweite >= 0\n"
 "Ende > Start + Schrittweite)"
 
+#, fuzzy
+msgid "Start retraction length: "
+msgstr "Start Rückzugslänge"
+
+#, fuzzy
+msgid "End retraction length: "
+msgstr "Ende Rückzugslänge"
+
+msgid "mm/mm"
+msgstr ""
+
 #: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid ""
 "3D Scene Operations\n"
@@ -10078,6 +10127,10 @@ msgstr ""
 "Wussten Sie, dass Sie die Festigkeit des Modells durch mehr Wandschleifen "
 "und eine höhere Dichte der Füllung verbessern können?"
 
+#, fuzzy
+#~ msgid "Fan Speedup Time"
+#~ msgstr "Lüftergeschwindigkeit: "
+
 #~ msgid "Post-processing scripts"
 #~ msgstr "Post-Processing-Skripte"
 

bbl/i18n/en/OrcaSlicer_en.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-04-29 20:13+0800\n"
+"POT-Creation-Date: 2023-05-08 16:37+0200\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -13,6 +13,40 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
 "X-Generator: Poedit 3.1\n"
 
+#, fuzzy
+msgid "Physical Printer"
+msgstr "Printer"
+
+msgid ""
+"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
+"signed certificate."
+msgstr ""
+
+msgid ""
+"On this system, %s uses HTTPS certificates from the system Certificate Store "
+"or Keychain."
+msgstr ""
+
+msgid ""
+"To use a custom CA file, please import your CA file into Certificate Store / "
+"Keychain."
+msgstr ""
+
+#, fuzzy
+msgid "Send to print"
+msgstr "Send to printer"
+
+#, fuzzy
+msgid "Upload"
+msgstr "Unload"
+
+#, fuzzy
+msgid "Upload and Print"
+msgstr "Uploading"
+
+msgid "Use forward slashes ( / ) as a directory separator if needed."
+msgstr ""
+
 msgid "Supports Painting"
 msgstr "Support Painting"
 
@@ -3277,6 +3311,10 @@ msgstr ""
 msgid "Pressure advance"
 msgstr ""
 
+#, fuzzy
+msgid "Retraction test"
+msgstr ""
+
 msgid "Max flowrate"
 msgstr ""
 
@@ -5081,13 +5119,13 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
+"by right-click the empty position of build plate and choose \"Add "
-"\"->\"Timelapse Wipe Tower\"."
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
+"by right-click the empty position of build plate and choose \"Add "
-"\"->\"Timelapse Wipe Tower\"."
+"Primitive\"->\"Timelapse Wipe Tower\"."
 
 msgid "Line width"
 msgstr "Line width"
@@ -5152,9 +5190,6 @@ msgstr ""
 msgid "Post-processing Scripts"
 msgstr ""
 
-msgid "Post-processing scripts"
-msgstr ""
-
 msgid "Frequent"
 msgstr "Frequent"
 
@@ -5290,6 +5325,12 @@ msgstr "Filament end G-code"
 msgid "Printable space"
 msgstr "Printable space"
 
+msgid "Cooling Fan"
+msgstr ""
+
+msgid "Fan speed-up time"
+msgstr ""
+
 msgid "Extruder Clearance"
 msgstr ""
 
@@ -6591,7 +6632,7 @@ msgid ""
 "all outer wall no matter how much overhang degree"
 msgstr ""
 
-msgid "Bridge direction"
+msgid "Bridge infill direction"
 msgstr ""
 
 msgid ""
@@ -7154,14 +7195,6 @@ msgstr ""
 "This is the angle for sparse infill pattern, which controls the start or "
 "main direction of lines."
 
-msgid "Bridge infill direction"
-msgstr ""
-
-msgid ""
-"Angle for bridge infill pattern, which controls the start or main direction "
-"of line"
-msgstr ""
-
 msgid "Sparse infill density"
 msgstr "Sparse infill density"
 
@@ -7312,6 +7345,15 @@ msgstr ""
 msgid "Travel speed of initial layer"
 msgstr ""
 
+#, fuzzy
+msgid "Number of slow layers"
+msgstr "This is the number of top interface layers."
+
+msgid ""
+"The first few layers are printed slower than normal. The speed is gradually "
+"increased in a linear fashion over the specified number of layers."
+msgstr ""
+
 msgid "Initial layer nozzle temperature"
 msgstr "First layer nozzle temperature"
 
@@ -7321,6 +7363,24 @@ msgstr "Nozzle temperature for printing the first layer with this filament"
 msgid "Full fan speed at layer"
 msgstr "Full fan speed at layer"
 
+msgid ""
+"Fan speed will be ramped up linearly from zero at layer "
+"\"close_fan_the_first_x_layers\" to maximum at layer "
+"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
+"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
+"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+msgstr ""
+
+msgid "Support interface fan speed"
+msgstr ""
+
+msgid ""
+"This fan speed is enforced during all support interfaces, to be able to "
+"weaken their bonding with a high fan speed.\n"
+"Set to -1 to disable this override.\n"
+"Can only be overriden by disable_fan_first_layers."
+msgstr ""
+
 msgid ""
 "Randomly jitter while printing the wall, so that the surface has a rough "
 "look. This setting controls the fuzzy position"
@@ -7442,6 +7502,35 @@ msgstr ""
 msgid "Enable this option if machine has auxiliary part cooling fan"
 msgstr "Enable this option if the machine has an auxiliary part cooling fan"
 
+msgid ""
+"Start the fan this number of seconds earlier than its target start time (you "
+"can use fractional seconds). It assumes infinite acceleration for this time "
+"estimation, and will only take into account G1 and G0 moves (arc fitting is "
+"unsupported).\n"
+"It won't move fan comands from custom gcodes (they act as a sort of "
+"'barrier').\n"
+"It won't move fan comands into the start gcode if the 'only custom start "
+"gcode' is activated.\n"
+"Use 0 to deactivate."
+msgstr ""
+
+msgid "Only overhangs"
+msgstr ""
+
+msgid "Will only take into account the delay for the cooling of overhangs."
+msgstr ""
+
+msgid "Fan kick-start time"
+msgstr ""
+
+msgid ""
+"Emit a max fan speed command for this amount of seconds before reducing to "
+"target speed to kick-start the cooling fan.\n"
+"This is useful for fans where a low PWM/power may be insufficient to get the "
+"fan started spinning from a stop, or to get the fan up to speed faster.\n"
+"Set to 0 to deactivate."
+msgstr ""
+
 msgid "G-code flavor"
 msgstr "G-code flavor"
 
@@ -7975,8 +8064,8 @@ msgstr ""
 msgid ""
 "In order to reduce the visibility of the seam in a closed loop extrusion, "
 "the loop is interrupted and shortened by a specified amount.\n"
-"This amount can be specified in millimeters or as a percentage of the current "
+"This amount can be specified in millimeters or as a percentage of the "
-"extruder diameter. The default value for this parameter is 15%."
+"current extruder diameter. The default value for this parameter is 15%."
 msgstr ""
 
 msgid "Role base wipe speed"
@@ -9006,6 +9095,15 @@ msgid ""
 "end > start + step)"
 msgstr ""
 
+msgid "Start retraction length: "
+msgstr ""
+
+msgid "End retraction length: "
+msgstr "Retraction Length"
+
+msgid "mm/mm"
+msgstr ""
+
 #: resources/data/hints.ini: [hint:3D Scene Operations]
 msgid ""
 "3D Scene Operations\n"
@@ -9835,9 +9933,6 @@ msgstr ""
 #~ msgid "Unable to create zip file"
 #~ msgstr "Unable to create zip file"
 
-#~ msgid "Uploading"
-#~ msgstr "Uploading"
-
 #~ msgid "User pause"
 #~ msgstr "User pause"