diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index 023c012718..1e7ef3b145 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -1,7 +1,7 @@
 {
     "name": "Bambulab",
     "url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-    "version": "01.07.00.02",
+    "version": "01.07.00.03",
     "force_update": "0",
     "description": "the initial version of BBL configurations",
     "machine_model_list": [
@@ -16,6 +16,10 @@
         {
             "name": "Bambu Lab P1P",
             "sub_path": "machine/Bambu Lab P1P.json"
+        },
+        {
+            "name": "Bambu Lab P1S",
+            "sub_path": "machine/Bambu Lab P1S.json"
         }
     ],
     "process_list": [
@@ -1046,6 +1050,22 @@
         {
             "name": "Bambu Lab P1P 0.8 nozzle",
             "sub_path": "machine/Bambu Lab P1P 0.8 nozzle.json"
+        },
+        {
+            "name": "Bambu Lab P1S 0.4 nozzle",
+            "sub_path": "machine/Bambu Lab P1S 0.4 nozzle.json"
+        },
+        {
+            "name": "Bambu Lab P1S 0.2 nozzle",
+            "sub_path": "machine/Bambu Lab P1S 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu Lab P1S 0.6 nozzle",
+            "sub_path": "machine/Bambu Lab P1S 0.6 nozzle.json"
+        },
+        {
+            "name": "Bambu Lab P1S 0.8 nozzle",
+            "sub_path": "machine/Bambu Lab P1S 0.8 nozzle.json"
         }
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json
index f0114486c3..9ab4f1513f 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json
index 20e4a03425..371647908f 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json	
@@ -16,6 +16,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json
index eb45946bef..f28bb2a425 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json	
@@ -12,6 +12,8 @@
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
-        "Bambu Lab X1 0.6 nozzle"
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json
index b8735671c7..aea32b4ccb 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab P1P 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json
index 31d2a98fdd..e5be657ca2 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json	
@@ -9,6 +9,7 @@
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab P1P 0.4 nozzle",
-        "Bambu Lab P1P 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json
index f65a8e339b..8fc456b2e7 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json	
@@ -14,6 +14,8 @@
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json
index 20a8fb0469..5738020708 100644
--- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json	
@@ -29,6 +29,9 @@
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json
index 1d226fc1a1..8841f79494 100644
--- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json	
@@ -11,6 +11,9 @@
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json
index 6afdd4352b..686116f6d8 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json	
@@ -13,6 +13,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json
index 360b0465b9..3612ac4e6d 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",
-        "Bambu Lab X1 0.6 nozzle"
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab P1S 0.6 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json
index f067ceab0a..55cd8691bf 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json
index 047a71fe82..8d42fcbe71 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json	
@@ -7,6 +7,7 @@
     "inherits": "Bambu PC @base",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
-        "Bambu Lab X1 0.4 nozzle"
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json
index a6985f95a3..3550e947ce 100644
--- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json	
@@ -17,6 +17,9 @@
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json
index 5b6d8dc952..2e0ad795e7 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json	
@@ -11,6 +11,7 @@
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",
-        "Bambu Lab P1P 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json
index 632793d241..ec0647529a 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json	
@@ -20,6 +20,8 @@
         "Bambu Lab P1P 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.8 nozzle",
-        "Bambu Lab P1P 0.8 nozzle"
+        "Bambu Lab P1P 0.8 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json
index 135f9817ff..0c1b16bf99 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json	
@@ -11,6 +11,7 @@
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
-        "Bambu Lab P1P 0.4 nozzle"
+        "Bambu Lab P1P 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json
index 1627639ae4..0680c68034 100644
--- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
-        "Bambu Lab X1 0.4 nozzle"
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json
index 398dc3b856..c4e20d66fb 100644
--- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json	
@@ -9,6 +9,8 @@
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json
index e1aac32285..559801ab58 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json	
@@ -11,6 +11,9 @@
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
-        "Bambu Lab X1 Carbon 0.8 nozzle"
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json
index 18cd35515a..b35a11bd97 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json
index 38faedf717..aabdb191ab 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json	
@@ -9,6 +9,7 @@
         "21"
     ],
     "compatible_printers": [
-        "Bambu Lab X1 Carbon 0.8 nozzle"
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json
index f3805cc418..e83ef7154b 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json	
@@ -10,6 +10,8 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
-        "Bambu Lab X1 Carbon 0.6 nozzle"
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Impact @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Impact @BBL X1C.json
index fe317c0bad..7288470904 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Impact @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Impact @BBL X1C.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
       "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle"
+      "Bambu Lab X1 0.4 nozzle",
+      "Bambu Lab P1S 0.4 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json
index 73f924b854..4fe362318d 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json	
@@ -8,6 +8,9 @@
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
-        "Bambu Lab X1 Carbon 0.8 nozzle"
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json
index 9a3d75e313..cd0ab92066 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json
index 6d40ddbad1..f3039c5953 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json	
@@ -9,6 +9,7 @@
         "22"
     ],
     "compatible_printers": [
-        "Bambu Lab X1 Carbon 0.8 nozzle"
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json
index 6d1d4dd148..e4e70dd51b 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json	
@@ -10,6 +10,8 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
-        "Bambu Lab X1 Carbon 0.6 nozzle"
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json
index be628909be..c722caa9f3 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json
index 05298e0276..145ba4e68b 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json	
@@ -11,6 +11,9 @@
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
-        "Bambu Lab X1 Carbon 0.8 nozzle"
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json
index 3125bb6f01..a071d3a8ba 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json
index a4631516cc..9ee3c8a914 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json	
@@ -8,6 +8,9 @@
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
-        "Bambu Lab X1 Carbon 0.8 nozzle"
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json
index a2e5ee4182..b60657eab0 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json	
@@ -8,6 +8,9 @@
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
-        "Bambu Lab X1 Carbon 0.8 nozzle"
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json
index 84c6118f99..c1d88bc3d2 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json
index 863ece5129..b203df44e8 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json	
@@ -11,6 +11,9 @@
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
-        "Bambu Lab X1 Carbon 0.8 nozzle"
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json
index 9faccbf884..fc805fd436 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json	
@@ -18,6 +18,8 @@
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json
index 4032b31142..0906ad366e 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json	
@@ -16,6 +16,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
-        "Bambu Lab X1 0.4 nozzle"
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json
index 090e8de175..802f2c9de2 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json	
@@ -11,6 +11,9 @@
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json
index 7903c25650..b42141a9f8 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json	
@@ -16,6 +16,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json
index cc017cc03d..f110bf6135 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json	
@@ -11,6 +11,9 @@
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json
index f2c4ca4fc3..4d194ca020 100644
--- a/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json	
@@ -11,6 +11,9 @@
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json
index 603f193d28..c300fa8104 100644
--- a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json	
@@ -16,6 +16,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json
index 9993c501b8..eb93ea64c0 100644
--- a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json	
@@ -8,6 +8,9 @@
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
-        "Bambu Lab X1 Carbon 0.8 nozzle"
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json
index dad36754c7..5aff786ba0 100644
--- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json	
@@ -11,6 +11,9 @@
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
-        "Bambu Lab X1 Carbon 0.8 nozzle"
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json
index ff01278197..f63befa67e 100644
--- a/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic ABS.json b/resources/profiles/BBL/filament/Generic ABS.json
index e05809f056..b21d0a3f63 100644
--- a/resources/profiles/BBL/filament/Generic ABS.json	
+++ b/resources/profiles/BBL/filament/Generic ABS.json	
@@ -11,6 +11,9 @@
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json
index 1a355bf7d3..0f614f4885 100644
--- a/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic ASA.json b/resources/profiles/BBL/filament/Generic ASA.json
index 311076352a..e2e68058f7 100644
--- a/resources/profiles/BBL/filament/Generic ASA.json	
+++ b/resources/profiles/BBL/filament/Generic ASA.json	
@@ -11,6 +11,9 @@
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json
index c40cbabf7f..7a2636be4e 100644
--- a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json	
@@ -11,6 +11,7 @@
   "compatible_printers": [
       "Bambu Lab X1 Carbon 0.2 nozzle",
       "Bambu Lab X1 0.2 nozzle",
-      "Bambu Lab P1P 0.2 nozzle"
+      "Bambu Lab P1P 0.2 nozzle",
+      "Bambu Lab P1S 0.2 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json
index 5b16d012ec..b77b75727a 100644
--- a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json	
@@ -14,6 +14,9 @@
       "Bambu Lab X1 0.8 nozzle",
       "Bambu Lab P1P 0.4 nozzle",
       "Bambu Lab P1P 0.6 nozzle",
-      "Bambu Lab P1P 0.8 nozzle"
+      "Bambu Lab P1P 0.8 nozzle",
+      "Bambu Lab P1S 0.4 nozzle",
+      "Bambu Lab P1S 0.6 nozzle",
+      "Bambu Lab P1S 0.8 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PA-CF.json b/resources/profiles/BBL/filament/Generic PA-CF.json
index ef0e63c195..bebf3edb69 100644
--- a/resources/profiles/BBL/filament/Generic PA-CF.json	
+++ b/resources/profiles/BBL/filament/Generic PA-CF.json	
@@ -33,6 +33,9 @@
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PA.json b/resources/profiles/BBL/filament/Generic PA.json
index 193c0e61ba..cfa3675177 100644
--- a/resources/profiles/BBL/filament/Generic PA.json	
+++ b/resources/profiles/BBL/filament/Generic PA.json	
@@ -24,6 +24,9 @@
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json
index 1563dd5c8a..ece4e59957 100644
--- a/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PC.json b/resources/profiles/BBL/filament/Generic PC.json
index 156ee20981..07532d56f8 100644
--- a/resources/profiles/BBL/filament/Generic PC.json	
+++ b/resources/profiles/BBL/filament/Generic PC.json	
@@ -11,6 +11,9 @@
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json
index 058dfa6f42..124f0a32f6 100644
--- a/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json
index ebfa065b87..85cc9c8b22 100644
--- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json	
@@ -11,6 +11,9 @@
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/filament/Generic PETG.json b/resources/profiles/BBL/filament/Generic PETG.json
index 0b1ff297b2..ca84198d62 100644
--- a/resources/profiles/BBL/filament/Generic PETG.json	
+++ b/resources/profiles/BBL/filament/Generic PETG.json	
@@ -11,6 +11,9 @@
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json
index 1612b2ff70..8c37572bc1 100644
--- a/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json	
@@ -13,6 +13,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PLA Silk.json b/resources/profiles/BBL/filament/Generic PLA Silk.json
index a9d007ce6b..ce9698f67f 100644
--- a/resources/profiles/BBL/filament/Generic PLA Silk.json	
+++ b/resources/profiles/BBL/filament/Generic PLA Silk.json	
@@ -17,6 +17,9 @@
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PLA-CF.json b/resources/profiles/BBL/filament/Generic PLA-CF.json
index 970d25f16b..39f5a6a48b 100644
--- a/resources/profiles/BBL/filament/Generic PLA-CF.json	
+++ b/resources/profiles/BBL/filament/Generic PLA-CF.json	
@@ -11,6 +11,9 @@
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.4 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/filament/Generic PLA.json b/resources/profiles/BBL/filament/Generic PLA.json
index a3bf6fe9b7..e4579f39cc 100644
--- a/resources/profiles/BBL/filament/Generic PLA.json	
+++ b/resources/profiles/BBL/filament/Generic PLA.json	
@@ -11,7 +11,10 @@
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"    
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}"
diff --git a/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json
index aa3c484f76..596ddaf913 100644
--- a/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PVA.json b/resources/profiles/BBL/filament/Generic PVA.json
index bb056167a3..4bd23ee2b2 100644
--- a/resources/profiles/BBL/filament/Generic PVA.json	
+++ b/resources/profiles/BBL/filament/Generic PVA.json	
@@ -11,6 +11,9 @@
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.6 nozzle",
-        "Bambu Lab X1 0.8 nozzle"
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic TPU.json b/resources/profiles/BBL/filament/Generic TPU.json
index 3e7d274cb8..f956343ae0 100644
--- a/resources/profiles/BBL/filament/Generic TPU.json	
+++ b/resources/profiles/BBL/filament/Generic TPU.json	
@@ -18,6 +18,9 @@
         "Bambu Lab X1 0.8 nozzle",
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
-        "Bambu Lab X1 Carbon 0.8 nozzle"
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json
index 1a5eae3e91..f8ec37a8e5 100644
--- a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json
index 24639d0071..8f039164ae 100644
--- a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json	
@@ -11,6 +11,9 @@
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
-        "Bambu Lab X1 Carbon 0.8 nozzle"
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json
index 2db969f0f7..82e80205e8 100644
--- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json	
@@ -10,6 +10,7 @@
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
-        "Bambu Lab X1 0.2 nozzle"
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json
index 0aae00edca..cf3a62a561 100644
--- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json	
@@ -11,6 +11,9 @@
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
-        "Bambu Lab X1 Carbon 0.8 nozzle"
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json
index 9dc50a24e3..5e0826b74e 100644
--- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json	
@@ -10,6 +10,7 @@
   ],
   "compatible_printers": [
       "Bambu Lab X1 Carbon 0.2 nozzle",
-      "Bambu Lab X1 0.2 nozzle"
+      "Bambu Lab X1 0.2 nozzle",
+      "Bambu Lab P1S 0.2 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json
index 0f1e4748d9..8b37f3fc6c 100644
--- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json	
@@ -8,6 +8,9 @@
   "compatible_printers": [
       "Bambu Lab X1 Carbon 0.4 nozzle",
       "Bambu Lab X1 Carbon 0.6 nozzle",
-      "Bambu Lab X1 Carbon 0.8 nozzle"
+      "Bambu Lab X1 Carbon 0.8 nozzle",
+      "Bambu Lab P1S 0.4 nozzle",
+      "Bambu Lab P1S 0.6 nozzle",
+      "Bambu Lab P1S 0.8 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json
new file mode 100644
index 0000000000..ca50f6325b
--- /dev/null
+++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json	
@@ -0,0 +1,32 @@
+{
+  "type": "machine",
+  "setting_id": "GM015",
+  "name": "Bambu Lab P1S 0.2 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "Bambu Lab P1S 0.4 nozzle",
+  "printer_model": "Bambu Lab P1S",
+  "nozzle_diameter": [
+      "0.2"
+  ],
+  "printer_variant": "0.2",
+  "default_filament_profile": [
+      "Bambu PLA Basic @BBL X1C 0.2 nozzle"
+  ],
+  "default_print_profile": "0.10mm Standard @BBL P1P 0.2 nozzle",
+  "max_layer_height": [
+      "0.14"
+  ],
+  "min_layer_height": [
+      "0.04"
+  ],
+  "retraction_length": [
+      "0.4"
+  ],
+  "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230621 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG38 S2 Z30 F300 ; lower the hotbed , to prevent the nozzle is below the hotbed\nG0 Z-20;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
+  "upward_compatible_machine":[
+      "Bambu Lab P1P 0.2 nozzle",
+      "Bambu Lab X1 0.2 nozzle",
+      "Bambu Lab X1 Carbon 0.2 nozzle"
+  ]
+}
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json
new file mode 100644
index 0000000000..16a9aa11af
--- /dev/null
+++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json	
@@ -0,0 +1,38 @@
+{
+  "type": "machine",
+  "setting_id": "GM014",
+  "name": "Bambu Lab P1S 0.4 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_bbl_3dp_001_common",
+  "printer_model": "Bambu Lab P1S",
+  "default_filament_profile": [
+      "Bambu PLA Basic @BBL X1C"
+  ],
+  "default_print_profile": "0.20mm Standard @BBL X1C",
+  "nozzle_diameter": [
+      "0.4"
+  ],
+  "extruder_offset": [
+      "0x2"
+  ],
+  "bed_exclude_area": [
+    "0x0",
+    "18x0",
+    "18x28",
+    "0x28"
+  ],
+  "extruder_clearance_max_radius": "56",
+  "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230621 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG38 S2 Z30 F300 ; lower the hotbed , to prevent the nozzle is below the hotbed\nG0 Z-20;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
+  "scan_first_layer": "0",
+  "machine_load_filament_time": "29",
+  "machine_unload_filament_time": "28",
+  "nozzle_type": "stainless_steel",
+  "nozzle_hrc": "20",
+  "auxiliary_fan": "1",
+  "upward_compatible_machine":[
+      "Bambu Lab P1P 0.4 nozzle",
+      "Bambu Lab X1 0.4 nozzle",
+      "Bambu Lab X1 Carbon 0.4 nozzle"
+  ]
+}
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json
new file mode 100644
index 0000000000..41f30144a3
--- /dev/null
+++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json	
@@ -0,0 +1,37 @@
+{
+  "type": "machine",
+  "setting_id": "GM016",
+  "name": "Bambu Lab P1S 0.6 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "Bambu Lab P1S 0.4 nozzle",
+  "printer_model": "Bambu Lab P1S",
+  "default_filament_profile": [
+      "Bambu PLA Basic @BBL X1C"
+  ],
+  "default_print_profile": "0.30mm Standard @BBL X1C 0.6 nozzle",
+  "nozzle_diameter": [
+      "0.6"
+  ],
+  "printer_variant": "0.6",
+  "max_layer_height": [
+      "0.42"
+  ],
+  "min_layer_height": [
+      "0.12"
+  ],
+  "retraction_length": [
+      "1.4"
+  ],
+  "retraction_minimum_travel": [
+      "3"
+  ],
+  "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230621 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG38 S2 Z30 F300 ; lower the hotbed , to prevent the nozzle is below the hotbed\nG0 Z-20;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
+  "nozzle_type": "hardened_steel",
+  "nozzle_hrc": "55",
+  "upward_compatible_machine":[
+      "Bambu Lab P1P 0.6 nozzle",
+      "Bambu Lab X1 0.6 nozzle",
+      "Bambu Lab X1 Carbon 0.6 nozzle"
+  ]
+}
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json
new file mode 100644
index 0000000000..5c1c09f3a5
--- /dev/null
+++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json	
@@ -0,0 +1,40 @@
+{
+  "type": "machine",
+  "setting_id": "GM017",
+  "name": "Bambu Lab P1S 0.8 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "Bambu Lab P1S 0.4 nozzle",
+  "printer_model": "Bambu Lab P1S",
+  "default_filament_profile": [
+      "Bambu PLA Basic @BBL X1"
+  ],
+  "nozzle_diameter": [
+      "0.8"
+  ],
+  "printer_variant": "0.8",
+  "default_print_profile": "0.40mm Standard @BBL X1C 0.8 nozzle",
+  "max_layer_height": [
+      "0.56"
+  ],
+  "min_layer_height": [
+      "0.16"
+  ],
+  "retraction_length": [
+      "3"
+  ],
+  "retraction_minimum_travel": [
+      "1"
+  ],
+  "retract_length_toolchange": [
+    "3"
+  ],
+  "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230621 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG38 S2 Z30 F300 ; lower the hotbed , to prevent the nozzle is below the hotbed\nG0 Z-20;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
+  "nozzle_type": "hardened_steel",
+  "nozzle_hrc": "55",
+  "upward_compatible_machine":[
+      "Bambu Lab P1P 0.8 nozzle",
+      "Bambu Lab X1 0.8 nozzle",
+      "Bambu Lab X1 Carbon 0.8 nozzle"
+  ]
+}
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S.json b/resources/profiles/BBL/machine/Bambu Lab P1S.json
new file mode 100644
index 0000000000..340e1ec501
--- /dev/null
+++ b/resources/profiles/BBL/machine/Bambu Lab P1S.json	
@@ -0,0 +1,14 @@
+{
+  "type": "machine_model",
+  "name": "Bambu Lab P1S",
+  "model_id": "C12",
+  "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json",
+  "nozzle_diameter": "0.4;0.2;0.6;0.8",
+  "machine_tech": "FFF",
+  "family": "BBL-3DP",
+  "bed_model": "bbl-3dp-X1.stl",
+  "bed_texture": "bbl-3dp-logo.svg",
+  "hotend_model": "bbl-3dp-hotend.stl",
+  "default_materials": "Generic PLA Silk;Generic PLA;Bambu PLA Matte @BBL X1;Bambu PLA Basic @BBL X1;Bambu ABS @BBL X1C;Bambu PC @BBL X1C;Bambu Support W @BBL X1;Bambu TPU 95A @BBL X1;PolyTerra PLA @BBL X1;PolyLite PLA @BBL X1;"
+}
+
diff --git a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json
index a33581c4c0..afcd48090f 100644
--- a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json	
@@ -7,6 +7,7 @@
   "inherits": "fdm_process_bbl_0.06_nozzle_0.2",
   "compatible_printers": [
     "Bambu Lab X1 Carbon 0.2 nozzle",
-    "Bambu Lab X1 0.2 nozzle"
+    "Bambu Lab X1 0.2 nozzle",
+    "Bambu Lab P1S 0.2 nozzle"
   ]
 }
diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json
index 90e562575a..10981794ef 100644
--- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json	
@@ -7,6 +7,7 @@
     "inherits": "fdm_process_bbl_0.08",
     "compatible_printers": [
       "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle"
+      "Bambu Lab X1 0.4 nozzle",
+      "Bambu Lab P1S 0.4 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json
index 1bf42666e2..42cfda4fd4 100644
--- a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json	
@@ -7,6 +7,7 @@
   "inherits": "fdm_process_bbl_0.08_nozzle_0.2",
   "compatible_printers": [
     "Bambu Lab X1 Carbon 0.2 nozzle",
-    "Bambu Lab X1 0.2 nozzle"
+    "Bambu Lab X1 0.2 nozzle",
+    "Bambu Lab P1S 0.2 nozzle"
   ]
 }
diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json
index 7769fab5dc..86c5ccc347 100644
--- a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json	
@@ -7,6 +7,7 @@
     "inherits": "fdm_process_bbl_0.10_nozzle_0.2",
     "compatible_printers": [
       "Bambu Lab X1 Carbon 0.2 nozzle",
-      "Bambu Lab X1 0.2 nozzle"
+      "Bambu Lab X1 0.2 nozzle",
+      "Bambu Lab P1S 0.2 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json
index d3b2010713..a1e2466f24 100644
--- a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json	
@@ -7,6 +7,7 @@
     "inherits": "fdm_process_bbl_0.12",
     "compatible_printers": [
       "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle"
+      "Bambu Lab X1 0.4 nozzle",
+      "Bambu Lab P1S 0.4 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json
index a8d7221cf7..255f407950 100644
--- a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json	
@@ -7,6 +7,7 @@
   "inherits":  "fdm_process_bbl_0.12_nozzle_0.2",
   "compatible_printers": [
     "Bambu Lab X1 Carbon 0.2 nozzle",
-    "Bambu Lab X1 0.2 nozzle"
+    "Bambu Lab X1 0.2 nozzle",
+    "Bambu Lab P1S 0.2 nozzle"
   ]
 }
diff --git a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json
index 09c0e97496..38ba642cdb 100644
--- a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json	
@@ -7,6 +7,7 @@
   "inherits":  "fdm_process_bbl_0.14_nozzle_0.2",
   "compatible_printers": [
     "Bambu Lab X1 Carbon 0.2 nozzle",
-    "Bambu Lab X1 0.2 nozzle"
+    "Bambu Lab X1 0.2 nozzle",
+    "Bambu Lab P1S 0.2 nozzle"
   ]
 }
diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json
index a023f326a0..f0d4847185 100644
--- a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json	
@@ -7,6 +7,7 @@
     "inherits": "fdm_process_bbl_0.16",
     "compatible_printers": [
       "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle"
+      "Bambu Lab X1 0.4 nozzle",
+      "Bambu Lab P1S 0.4 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json
index 071264d00b..632362feea 100644
--- a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json	
@@ -7,6 +7,7 @@
   "inherits": "fdm_process_bbl_0.18_nozzle_0.6",
   "compatible_printers": [
     "Bambu Lab X1 Carbon 0.6 nozzle",
-    "Bambu Lab X1 0.6 nozzle"
+    "Bambu Lab X1 0.6 nozzle",
+    "Bambu Lab P1S 0.6 nozzle"
   ]
 }
diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json
index 6db5d3a433..0f392355d9 100644
--- a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json	
@@ -7,6 +7,7 @@
     "inherits": "fdm_process_bbl_0.20",
     "compatible_printers": [
       "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle"
+      "Bambu Lab X1 0.4 nozzle",
+      "Bambu Lab P1S 0.4 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json
index c8fe887079..658db119cd 100644
--- a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json	
@@ -10,6 +10,7 @@
     "sparse_infill_density": "25%",
     "compatible_printers": [
       "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle"
+      "Bambu Lab X1 0.4 nozzle",
+      "Bambu Lab P1S 0.4 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json
index ab17f8c801..a8483c1d5e 100644
--- a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json	
@@ -7,6 +7,7 @@
     "inherits": "fdm_process_bbl_0.24",
     "compatible_printers": [
       "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle"
+      "Bambu Lab X1 0.4 nozzle",
+      "Bambu Lab P1S 0.4 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json
index 725940ed75..c529637371 100644
--- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json	
@@ -7,6 +7,7 @@
   "inherits": "fdm_process_bbl_0.24_nozzle_0.6",
   "compatible_printers": [
     "Bambu Lab X1 Carbon 0.6 nozzle",
-    "Bambu Lab X1 0.6 nozzle"
+    "Bambu Lab X1 0.6 nozzle",
+    "Bambu Lab P1S 0.6 nozzle"
   ]
 }
diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json
index a90e2abcf7..1bd8407ae5 100644
--- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json	
@@ -7,6 +7,7 @@
   "inherits": "fdm_process_bbl_0.24_nozzle_0.8",
   "compatible_printers": [
     "Bambu Lab X1 Carbon 0.8 nozzle",
-    "Bambu Lab X1 0.8 nozzle"
+    "Bambu Lab X1 0.8 nozzle",
+    "Bambu Lab P1S 0.8 nozzle"
   ]
 }
diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json
index 690d48b5ab..7dca7acee6 100644
--- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json	
+++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json	
@@ -7,6 +7,7 @@
     "inherits": "fdm_process_bbl_0.28",
     "compatible_printers": [
       "Bambu Lab X1 Carbon 0.4 nozzle",
-      "Bambu Lab X1 0.4 nozzle"
+      "Bambu Lab X1 0.4 nozzle",
+      "Bambu Lab P1S 0.4 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json
index 9f126c5b66..ca96c93c7d 100644
--- a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json	
@@ -6,6 +6,7 @@
     "instantiation": "true",
     "inherits": "fdm_process_bbl_0.30_nozzle_0.6",
     "compatible_printers": [
-      "Bambu Lab X1 Carbon 0.6 nozzle"
+      "Bambu Lab X1 Carbon 0.6 nozzle",
+      "Bambu Lab P1S 0.6 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json
index 9969845848..c50b7e93de 100644
--- a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json	
@@ -9,6 +9,7 @@
   "sparse_infill_density":"25%",
   "compatible_printers": [
     "Bambu Lab X1 Carbon 0.6 nozzle",
-    "Bambu Lab X1 0.6 nozzle"
+    "Bambu Lab X1 0.6 nozzle",
+    "Bambu Lab P1S 0.6 nozzle"
   ]
 }
diff --git a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json
index e9b61a2b6c..81d6e630f5 100644
--- a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json	
@@ -7,6 +7,7 @@
   "inherits": "fdm_process_bbl_0.32_nozzle_0.8",
   "compatible_printers": [
     "Bambu Lab X1 Carbon 0.8 nozzle",
-    "Bambu Lab X1 0.8 nozzle"
+    "Bambu Lab X1 0.8 nozzle",
+    "Bambu Lab P1S 0.8 nozzle"
   ]
 }
diff --git a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json
index e31c2f08ed..6e8c3d10ff 100644
--- a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json	
@@ -7,6 +7,7 @@
   "inherits": "fdm_process_bbl_0.36_nozzle_0.6",
   "compatible_printers": [
     "Bambu Lab X1 Carbon 0.6 nozzle",
-    "Bambu Lab X1 0.6 nozzle"
+    "Bambu Lab X1 0.6 nozzle",
+    "Bambu Lab P1S 0.6 nozzle"
   ]
 }
diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json
index f74b806f6e..85ed2203d3 100644
--- a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json	
@@ -6,6 +6,7 @@
     "instantiation": "true",
     "inherits": "fdm_process_bbl_0.40_nozzle_0.8",
     "compatible_printers": [
-      "Bambu Lab X1 Carbon 0.8 nozzle"
+      "Bambu Lab X1 Carbon 0.8 nozzle",
+      "Bambu Lab P1S 0.8 nozzle"
     ]
 }
diff --git a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json
index 0e753d2256..59221c3100 100644
--- a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json	
+++ b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json	
@@ -7,6 +7,7 @@
   "inherits": "fdm_process_bbl_0.42_nozzle_0.6",
   "compatible_printers": [
     "Bambu Lab X1 Carbon 0.6 nozzle",
-    "Bambu Lab X1 0.6 nozzle"
+    "Bambu Lab X1 0.6 nozzle",
+    "Bambu Lab P1S 0.6 nozzle"
   ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json
index aabbbc9f93..38cd043b4d 100644
--- a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json	
@@ -7,6 +7,7 @@
   "inherits": "fdm_process_bbl_0.48_nozzle_0.8",
   "compatible_printers": [
     "Bambu Lab X1 Carbon 0.8 nozzle",
-    "Bambu Lab X1 0.8 nozzle"
+    "Bambu Lab X1 0.8 nozzle",
+    "Bambu Lab P1S 0.8 nozzle"
   ]
 }
diff --git a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json
index 9a56b41a54..421deb5b39 100644
--- a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json	
@@ -7,6 +7,7 @@
   "inherits": "fdm_process_bbl_0.56_nozzle_0.8",
   "compatible_printers": [
     "Bambu Lab X1 Carbon 0.8 nozzle",
-    "Bambu Lab X1 0.8 nozzle"
+    "Bambu Lab X1 0.8 nozzle",
+    "Bambu Lab P1S 0.8 nozzle"
   ]
 }