diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json
index df750e458d..d2253ed382 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json	
@@ -114,7 +114,7 @@
 	],
 	"single_extruder_multi_material": "1",
 	"manual_filament_change": "1",
-	"change_filament_gcode": "PAUSE",
+	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Creality Generic PLA @Ender-3V3-all"
diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json
index 874f19f3ce..8e3b8b6b27 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json	
@@ -12,7 +12,7 @@
 	"bottom_surface_pattern": "monotonic",
 	"bottom_shell_layers": "5",
 	"bottom_shell_thickness": "0",
-	"bridge_flow": "0.95",
+	"bridge_flow": "1",
 	"bridge_speed": "65",
     "brim_type": "no_brim",
 	"brim_width": "5",
@@ -23,17 +23,17 @@
 	"top_surface_acceleration": "5000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0",
+	"elefant_foot_compensation": "0.05",
 	"outer_wall_line_width": "0.42",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.45",
+	"line_width": "0.42",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
-	"outer_wall_acceleration": "5000",
+	"outer_wall_acceleration": "4000",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "1",
@@ -60,7 +60,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.45",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -104,7 +104,7 @@
 	"role_based_wipe_speed" : "0",
 	"wipe_speed": "200",
 	"prime_tower_width": "60",
-	"xy_hole_compensation": "0",
+	"xy_hole_compensation": "0.025",
 	"xy_contour_compensation": "0",
 	"default_jerk": "7",
 	"outer_wall_jerk": "7",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json
index f11c3340cf..d0357c0246 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json	
@@ -12,7 +12,7 @@
 	"bottom_surface_pattern": "monotonic",
 	"bottom_shell_layers": "4",
 	"bottom_shell_thickness": "0",
-	"bridge_flow": "0.95",
+	"bridge_flow": "1",
 	"bridge_speed": "65",
     "brim_type": "no_brim",
 	"brim_width": "5",
@@ -23,17 +23,17 @@
 	"top_surface_acceleration": "5000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0",
+	"elefant_foot_compensation": "0.05",
 	"outer_wall_line_width": "0.42",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.45",
+	"line_width": "0.42",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
-	"outer_wall_acceleration": "5000",
+	"outer_wall_acceleration": "4000",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "1",
@@ -60,7 +60,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.45",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -104,7 +104,7 @@
 	"role_based_wipe_speed" : "0",
 	"wipe_speed": "200",
 	"prime_tower_width": "60",
-	"xy_hole_compensation": "0",
+	"xy_hole_compensation": "0.025",
 	"xy_contour_compensation": "0",
 	"default_jerk": "7",
 	"outer_wall_jerk": "7",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json
index 2fe93ca40b..6321b57e8b 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json	
@@ -13,7 +13,7 @@
 	"bottom_surface_pattern": "monotonic",
 	"bottom_shell_layers": "4",
 	"bottom_shell_thickness": "0",
-	"bridge_flow": "0.95",
+	"bridge_flow": "1",
 	"bridge_speed": "65",
     "brim_type": "no_brim",
 	"brim_width": "5",
@@ -24,17 +24,17 @@
 	"top_surface_acceleration": "5000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0",
+	"elefant_foot_compensation": "0.05",
 	"outer_wall_line_width": "0.42",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.45",
+	"line_width": "0.42",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
-	"outer_wall_acceleration": "5000",
+	"outer_wall_acceleration": "4000",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.45",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -105,7 +105,7 @@
 	"role_based_wipe_speed": "0",
 	"wipe_speed": "200",
 	"prime_tower_width": "60",
-	"xy_hole_compensation": "0",
+	"xy_hole_compensation": "0.025",
 	"xy_contour_compensation": "0",
 	"default_jerk": "7",
 	"outer_wall_jerk": "7",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json
index a58e7726dc..12a55c48b3 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json	
@@ -12,7 +12,7 @@
 	"bottom_surface_pattern": "monotonic",
 	"bottom_shell_layers": "4",
 	"bottom_shell_thickness": "0",
-	"bridge_flow": "0.95",
+	"bridge_flow": "1",
 	"bridge_speed": "65",
     "brim_type": "no_brim",
 	"brim_width": "5",
@@ -23,17 +23,17 @@
 	"top_surface_acceleration": "5000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0",
+	"elefant_foot_compensation": "0.05",
 	"outer_wall_line_width": "0.42",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.45",
+	"line_width": "0.42",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
-	"outer_wall_acceleration": "5000",
+	"outer_wall_acceleration": "4000",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
@@ -60,7 +60,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.45",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -104,7 +104,7 @@
 	"role_based_wipe_speed" : "0",
 	"wipe_speed": "200",
 	"prime_tower_width": "60",
-	"xy_hole_compensation": "0",
+	"xy_hole_compensation": "0.025",
 	"xy_contour_compensation": "0",
 	"default_jerk": "7",
 	"outer_wall_jerk": "7",