diff --git a/resources/profiles/FLSun/machine/FLSun SR 0.4 nozzle.json b/resources/profiles/FLSun/machine/FLSun SR 0.4 nozzle.json
index d1d1788cc5..34b67bc6e6 100644
--- a/resources/profiles/FLSun/machine/FLSun SR 0.4 nozzle.json	
+++ b/resources/profiles/FLSun/machine/FLSun SR 0.4 nozzle.json	
@@ -230,7 +230,7 @@
         "1"
     ],
     "z_hop": [
-        "0.5"
+        "0.3"
     ],
     "z_hop_types": [
         "Normal Lift"
diff --git a/resources/profiles/FLSun/process/0.08mm Fine @FLSun SR.json b/resources/profiles/FLSun/process/0.08mm Fine @FLSun SR.json
index ff703cb0aa..0cc73b5bc1 100644
--- a/resources/profiles/FLSun/process/0.08mm Fine @FLSun SR.json	
+++ b/resources/profiles/FLSun/process/0.08mm Fine @FLSun SR.json	
@@ -18,7 +18,7 @@
     "brim_object_gap": "0",
     "compatible_printers_condition": "",
     "print_sequence": "by layer",
-    "default_acceleration": "1500",
+    "default_acceleration": "5000",
     "top_surface_acceleration": "0",
     "bridge_no_support": "0",
     "draft_shield": "disabled",
@@ -30,9 +30,9 @@
     "infill_direction": "45",
     "sparse_infill_density": "15%",
     "sparse_infill_pattern": "grid",
-    "initial_layer_acceleration": "1000",
+    "initial_layer_acceleration": "3000",
     "travel_acceleration": "0",
-    "inner_wall_acceleration": "800",
+    "inner_wall_acceleration": "3000",
     "initial_layer_line_width": "0.45",
     "initial_layer_print_height": "0.2",
     "infill_combination": "0",
@@ -76,10 +76,10 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "-1",
     "support_interface_spacing": "1.5",
-    "support_interface_speed": "100%",
+    "support_interface_speed": "70%",
     "support_base_pattern": "rectilinear",
     "support_base_pattern_spacing": "0.06",
-    "support_speed": "60",
+    "support_speed": "80",
     "support_threshold_angle": "45",
     "support_object_xy_distance": "60%",
     "tree_support_branch_angle": "45",
@@ -89,14 +89,14 @@
     "top_surface_line_width": "0.38",
     "top_shell_layers": "12",
     "top_shell_thickness": "0.8",
-    "initial_layer_speed": "35%",
-    "initial_layer_infill_speed": "35%",
+    "initial_layer_speed": "50%",
+    "initial_layer_infill_speed": "50%",
     "outer_wall_speed": "40",
-    "inner_wall_speed": "40",
+    "inner_wall_speed": "80",
     "internal_solid_infill_speed": "40",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
+    "top_surface_speed": "50",
+    "gap_infill_speed": "50",
+    "sparse_infill_speed": "100",
     "travel_speed": "150",
     "enable_prime_tower": "0",
     "wipe_tower_no_sparse_layers": "0",
diff --git a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun SR.json b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun SR.json
index 3f8183e966..37e52f6ea2 100644
--- a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun SR.json	
+++ b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun SR.json	
@@ -18,7 +18,7 @@
     "brim_object_gap": "0",
     "compatible_printers_condition": "",
     "print_sequence": "by layer",
-    "default_acceleration": "1500",
+    "default_acceleration": "5000",
     "top_surface_acceleration": "0",
     "bridge_no_support": "0",
     "draft_shield": "disabled",
@@ -30,9 +30,9 @@
     "infill_direction": "45",
     "sparse_infill_density": "15%",
     "sparse_infill_pattern": "grid",
-    "initial_layer_acceleration": "1000",
+    "initial_layer_acceleration": "3000",
     "travel_acceleration": "0",
-    "inner_wall_acceleration": "800",
+    "inner_wall_acceleration": "3000",
     "initial_layer_line_width": "0.45",
     "initial_layer_print_height": "0.2",
     "infill_combination": "0",
@@ -76,10 +76,10 @@
     "support_interface_top_layers": "2",
     "support_interface_bottom_layers": "-1",
     "support_interface_spacing": "0.5",
-    "support_interface_speed": "100%",
+    "support_interface_speed": "70%",
     "support_base_pattern": "rectilinear",
     "support_base_pattern_spacing": "0.16",
-    "support_speed": "60",
+    "support_speed": "80",
     "support_threshold_angle": "45",
     "support_object_xy_distance": "60%",
     "tree_support_branch_angle": "45",
@@ -89,14 +89,14 @@
     "top_surface_line_width": "0.38",
     "top_shell_layers": "6",
     "top_shell_thickness": "0.8",
-    "initial_layer_speed": "35%",
-    "initial_layer_infill_speed": "35%",
+    "initial_layer_speed": "50%",
+    "initial_layer_infill_speed": "50%",
     "outer_wall_speed": "40",
-    "inner_wall_speed": "40",
+    "inner_wall_speed": "80",
     "internal_solid_infill_speed": "40",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
+    "top_surface_speed": "50",
+    "gap_infill_speed": "50",
+    "sparse_infill_speed": "100",
     "travel_speed": "150",
     "enable_prime_tower": "0",
     "wipe_tower_no_sparse_layers": "0",
diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun SR.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun SR.json
index 354fbd39b8..6cbe6ae813 100644
--- a/resources/profiles/FLSun/process/0.20mm Standard @FLSun SR.json	
+++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun SR.json	
@@ -18,7 +18,7 @@
     "brim_object_gap": "0",
     "compatible_printers_condition": "",
     "print_sequence": "by layer",
-    "default_acceleration": "1500",
+    "default_acceleration": "5000",
     "top_surface_acceleration": "0",
     "bridge_no_support": "0",
     "draft_shield": "disabled",
@@ -30,9 +30,9 @@
     "infill_direction": "45",
     "sparse_infill_density": "15%",
     "sparse_infill_pattern": "grid",
-    "initial_layer_acceleration": "1000",
+    "initial_layer_acceleration": "3000",
     "travel_acceleration": "0",
-    "inner_wall_acceleration": "800",
+    "inner_wall_acceleration": "3000",
     "initial_layer_line_width": "0.45",
     "initial_layer_print_height": "0.2",
     "infill_combination": "0",
@@ -79,7 +79,7 @@
     "support_interface_speed": "100%",
     "support_base_pattern": "rectilinear",
     "support_base_pattern_spacing": "0.2",
-    "support_speed": "60",
+    "support_speed": "80",
     "support_threshold_angle": "45",
     "support_object_xy_distance": "60%",
     "tree_support_branch_angle": "45",
@@ -91,13 +91,13 @@
     "top_shell_thickness": "0.8",
     "initial_layer_speed": "35%",
     "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "40",
-    "inner_wall_speed": "40",
-    "internal_solid_infill_speed": "40",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "150",
+    "outer_wall_speed": "75",
+    "inner_wall_speed": "150",
+    "internal_solid_infill_speed": "150",
+    "top_surface_speed": "75",
+    "gap_infill_speed": "75",
+    "sparse_infill_speed": "150",
+    "travel_speed": "180",
     "enable_prime_tower": "0",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
diff --git a/resources/profiles/FLSun/process/0.24mm Draft @FLSun SR.json b/resources/profiles/FLSun/process/0.24mm Draft @FLSun SR.json
index ac55c64ecf..cbe5ff6946 100644
--- a/resources/profiles/FLSun/process/0.24mm Draft @FLSun SR.json	
+++ b/resources/profiles/FLSun/process/0.24mm Draft @FLSun SR.json	
@@ -79,7 +79,7 @@
     "support_interface_speed": "100%",
     "support_base_pattern": "rectilinear",
     "support_base_pattern_spacing": "0.18",
-    "support_speed": "60",
+    "support_speed": "80",
     "support_threshold_angle": "45",
     "support_object_xy_distance": "60%",
     "tree_support_branch_angle": "45",
@@ -91,13 +91,13 @@
     "top_shell_thickness": "0.8",
     "initial_layer_speed": "35%",
     "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "40",
-    "inner_wall_speed": "40",
-    "internal_solid_infill_speed": "40",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "150",
+    "outer_wall_speed": "75",
+    "inner_wall_speed": "150",
+    "internal_solid_infill_speed": "150",
+    "top_surface_speed": "75",
+    "gap_infill_speed": "75",
+    "sparse_infill_speed": "150",
+    "travel_speed": "180",
     "enable_prime_tower": "0",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",
diff --git a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun SR.json b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun SR.json
index bac94a97e1..b310116d74 100644
--- a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun SR.json	
+++ b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun SR.json	
@@ -79,7 +79,7 @@
     "support_interface_speed": "100%",
     "support_base_pattern": "rectilinear",
     "support_base_pattern_spacing": "0.22",
-    "support_speed": "60",
+    "support_speed": "80",
     "support_threshold_angle": "45",
     "support_object_xy_distance": "60%",
     "tree_support_branch_angle": "45",
@@ -91,13 +91,13 @@
     "top_shell_thickness": "0.8",
     "initial_layer_speed": "35%",
     "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "40",
-    "inner_wall_speed": "40",
-    "internal_solid_infill_speed": "40",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "150",
+    "outer_wall_speed": "75",
+    "inner_wall_speed": "150",
+    "internal_solid_infill_speed": "150",
+    "top_surface_speed": "75",
+    "gap_infill_speed": "75",
+    "sparse_infill_speed": "150",
+    "travel_speed": "180",
     "enable_prime_tower": "0",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "60",