diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot
index 41a2718628..cc3a4f49b8 100644
--- a/bbl/i18n/BambuStudio.pot
+++ b/bbl/i18n/BambuStudio.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-30 14:28+0800\n"
+"POT-Creation-Date: 2022-09-01 09:20+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -336,9 +336,6 @@ msgstr ""
 msgid "Perform Recognition"
 msgstr ""
 
-msgid "Clipping of view"
-msgstr ""
-
 msgid "Reset direction"
 msgstr ""
 
@@ -1338,6 +1335,18 @@ msgid ""
 "Note: Only the AMS slots loaded with the same material type can be selected."
 msgstr ""
 
+msgid "Enable AMS"
+msgstr ""
+
+msgid "Print with filaments in the AMS"
+msgstr ""
+
+msgid "Disable AMS"
+msgstr ""
+
+msgid "Print with the filament mounted on the back of chassis"
+msgstr ""
+
 msgid "Insertion update"
 msgstr ""
 
@@ -2822,7 +2831,7 @@ msgstr ""
 msgid "Loading file: %s"
 msgstr ""
 
-msgid "The 3mf is not from Bambu lab, load geometry data only."
+msgid "The 3mf is not from Bambu Lab, load geometry data only."
 msgstr ""
 
 msgid "Load 3mf"
@@ -2852,7 +2861,7 @@ msgid ""
 "software.\n"
 msgstr ""
 
-msgid "the 3mf is not compatible, load geometry data only!"
+msgid "The 3mf is not compatible, load geometry data only!"
 msgstr ""
 
 msgid "Incompatible 3mf"
diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po
index 67d8922bb7..f2e545338b 100644
--- a/bbl/i18n/de/BambuStudio_de.po
+++ b/bbl/i18n/de/BambuStudio_de.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-30 14:28+0800\n"
+"POT-Creation-Date: 2022-09-01 09:20+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -338,9 +338,6 @@ msgstr "Face recognition"
 msgid "Perform Recognition"
 msgstr "Perform Recognition"
 
-msgid "Clipping of view"
-msgstr ""
-
 msgid "Reset direction"
 msgstr ""
 
@@ -1406,6 +1403,18 @@ msgid ""
 "Note: Only the AMS slots loaded with the same material type can be selected."
 msgstr ""
 
+msgid "Enable AMS"
+msgstr ""
+
+msgid "Print with filaments in the AMS"
+msgstr ""
+
+msgid "Disable AMS"
+msgstr ""
+
+msgid "Print with the filament mounted on the back of chassis"
+msgstr ""
+
 msgid "Insertion update"
 msgstr "Insertion update"
 
@@ -2995,7 +3004,7 @@ msgstr "Wiederherstellen"
 msgid "Loading file: %s"
 msgstr "Datei wird geladen: %s"
 
-msgid "The 3mf is not from Bambu lab, load geometry data only."
+msgid "The 3mf is not from Bambu Lab, load geometry data only."
 msgstr ""
 
 msgid "Load 3mf"
@@ -3027,8 +3036,8 @@ msgid ""
 "software.\n"
 msgstr ""
 
-msgid "the 3mf is not compatible, load geometry data only!"
-msgstr "die 3mf ist nicht kompatibel, laden Sie nur Geometriedaten!"
+msgid "The 3mf is not compatible, load geometry data only!"
+msgstr ""
 
 msgid "Incompatible 3mf"
 msgstr "Inkompatible 3mf"
@@ -6749,6 +6758,9 @@ msgstr "Support: fix holes at layer %d"
 msgid "Support: propagate branches at layer %d"
 msgstr "Support: propagate branches at layer %d"
 
+#~ msgid "the 3mf is not compatible, load geometry data only!"
+#~ msgstr "die 3mf ist nicht kompatibel, laden Sie nur Geometriedaten!"
+
 #~ msgid "Save configuration as:"
 #~ msgstr "Konfiguration speichern unter:"
 
diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po
index ee6668b09a..606d5c28e4 100644
--- a/bbl/i18n/en/BambuStudio_en.po
+++ b/bbl/i18n/en/BambuStudio_en.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-30 14:28+0800\n"
+"POT-Creation-Date: 2022-09-01 09:20+0800\n"
 "Language: en\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -333,9 +333,6 @@ msgstr "Face recognition"
 msgid "Perform Recognition"
 msgstr "Perform Recognition"
 
-msgid "Clipping of view"
-msgstr ""
-
 msgid "Reset direction"
 msgstr ""
 
@@ -1377,6 +1374,18 @@ msgid ""
 "Note: Only the AMS slots loaded with the same material type can be selected."
 msgstr ""
 
+msgid "Enable AMS"
+msgstr ""
+
+msgid "Print with filaments in the AMS"
+msgstr ""
+
+msgid "Disable AMS"
+msgstr ""
+
+msgid "Print with the filament mounted on the back of chassis"
+msgstr ""
+
 msgid "Insertion update"
 msgstr "Insertion update"
 
@@ -2315,7 +2324,7 @@ msgid "Load a model"
 msgstr "Load a model"
 
 msgid "Import Configs"
-msgstr ""
+msgstr "Import Presets"
 
 msgid "Load configs"
 msgstr ""
@@ -2342,7 +2351,7 @@ msgid "Export current plate as G-code"
 msgstr ""
 
 msgid "Export &Configs"
-msgstr ""
+msgstr "Export Presets"
 
 msgid "Export current configuration to files"
 msgstr ""
@@ -2474,8 +2483,8 @@ msgstr ""
 #, c-format, boost-format
 msgid "There is %d config exported. (Only non-system configs)"
 msgid_plural "There are %d configs exported. (Only non-system configs)"
-msgstr[0] ""
-msgstr[1] ""
+msgstr[0] "There is %d preset exported. (Only non-system and currently used presets)"
+msgstr[1] "There are %d presets exported. (Only non-system and currently used presets)"
 
 msgid "Export result"
 msgstr ""
@@ -2487,8 +2496,8 @@ msgstr ""
 msgid "There is %d config imported. (Only non-system and compatible configs)"
 msgid_plural ""
 "There are %d configs imported. (Only non-system and compatible configs)"
-msgstr[0] ""
-msgstr[1] ""
+msgstr[0] "There is %d preset imported. (Only non-system and compatible presets)"
+msgstr[1] "There are %d presets imported. (Only non-system and compatible presets)"
 
 msgid "Import result"
 msgstr ""
@@ -2948,7 +2957,7 @@ msgstr "Restore"
 msgid "Loading file: %s"
 msgstr "Loading file: %s"
 
-msgid "The 3mf is not from Bambu lab, load geometry data only."
+msgid "The 3mf is not from Bambu Lab, load geometry data only."
 msgstr ""
 
 msgid "Load 3mf"
@@ -2980,8 +2989,8 @@ msgid ""
 "software.\n"
 msgstr ""
 
-msgid "the 3mf is not compatible, load geometry data only!"
-msgstr "The 3mf is not compatible, loading geometry data only!"
+msgid "The 3mf is not compatible, load geometry data only!"
+msgstr ""
 
 msgid "Incompatible 3mf"
 msgstr "Incompatible 3mf"
@@ -6618,6 +6627,9 @@ msgstr "Support: fix holes at layer %d"
 msgid "Support: propagate branches at layer %d"
 msgstr "Support: propagate branches at layer %d"
 
+#~ msgid "the 3mf is not compatible, load geometry data only!"
+#~ msgstr "The 3mf is not compatible, loading geometry data only!"
+
 #~ msgid "Save configuration as:"
 #~ msgstr "Save configuration as:"
 
diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po
index 203096fa2e..f5f43dc00e 100644
--- a/bbl/i18n/es/BambuStudio_es.po
+++ b/bbl/i18n/es/BambuStudio_es.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-30 14:28+0800\n"
+"POT-Creation-Date: 2022-09-01 09:20+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -339,9 +339,6 @@ msgstr "Face recognition"
 msgid "Perform Recognition"
 msgstr "Perform Recognition"
 
-msgid "Clipping of view"
-msgstr ""
-
 msgid "Reset direction"
 msgstr ""
 
@@ -1401,6 +1398,18 @@ msgid ""
 "Note: Only the AMS slots loaded with the same material type can be selected."
 msgstr ""
 
+msgid "Enable AMS"
+msgstr ""
+
+msgid "Print with filaments in the AMS"
+msgstr ""
+
+msgid "Disable AMS"
+msgstr ""
+
+msgid "Print with the filament mounted on the back of chassis"
+msgstr ""
+
 msgid "Insertion update"
 msgstr "Insertion update"
 
@@ -2987,7 +2996,7 @@ msgstr "Restaurar"
 msgid "Loading file: %s"
 msgstr "Cargando archivo: %s"
 
-msgid "The 3mf is not from Bambu lab, load geometry data only."
+msgid "The 3mf is not from Bambu Lab, load geometry data only."
 msgstr ""
 
 msgid "Load 3mf"
@@ -3019,8 +3028,8 @@ msgid ""
 "software.\n"
 msgstr ""
 
-msgid "the 3mf is not compatible, load geometry data only!"
-msgstr "el 3mf no es compatible, ¡cargue sólo los datos geométricos!"
+msgid "The 3mf is not compatible, load geometry data only!"
+msgstr ""
 
 msgid "Incompatible 3mf"
 msgstr "3mf Incompatible "
@@ -6727,6 +6736,9 @@ msgstr "Soporte: arreglar huecos en la capa %d"
 msgid "Support: propagate branches at layer %d"
 msgstr "Soporte: propagar ramas en la capa %d"
 
+#~ msgid "the 3mf is not compatible, load geometry data only!"
+#~ msgstr "el 3mf no es compatible, ¡cargue sólo los datos geométricos!"
+
 #~ msgid "Save configuration as:"
 #~ msgstr "Guardar la configuración como:"
 
diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po
index 3b1d4eb20f..2a3eaa1ab2 100644
--- a/bbl/i18n/fr/BambuStudio_fr.po
+++ b/bbl/i18n/fr/BambuStudio_fr.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-30 14:28+0800\n"
+"POT-Creation-Date: 2022-09-01 09:20+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -338,9 +338,6 @@ msgstr "Face recognition"
 msgid "Perform Recognition"
 msgstr "Perform Recognition"
 
-msgid "Clipping of view"
-msgstr ""
-
 msgid "Reset direction"
 msgstr ""
 
@@ -1401,6 +1398,18 @@ msgid ""
 "Note: Only the AMS slots loaded with the same material type can be selected."
 msgstr ""
 
+msgid "Enable AMS"
+msgstr ""
+
+msgid "Print with filaments in the AMS"
+msgstr ""
+
+msgid "Disable AMS"
+msgstr ""
+
+msgid "Print with the filament mounted on the back of chassis"
+msgstr ""
+
 msgid "Insertion update"
 msgstr "Insertion update"
 
@@ -2965,7 +2974,7 @@ msgstr "Restaurer"
 msgid "Loading file: %s"
 msgstr "Chargement du fichier : %s"
 
-msgid "The 3mf is not from Bambu lab, load geometry data only."
+msgid "The 3mf is not from Bambu Lab, load geometry data only."
 msgstr ""
 
 msgid "Load 3mf"
@@ -2997,9 +3006,8 @@ msgid ""
 "software.\n"
 msgstr ""
 
-msgid "the 3mf is not compatible, load geometry data only!"
+msgid "The 3mf is not compatible, load geometry data only!"
 msgstr ""
-"le 3mf n'est pas compatible, chargez uniquement les données de géométrie !"
 
 msgid "Incompatible 3mf"
 msgstr "Incompatible 3mf"
@@ -6731,6 +6739,10 @@ msgstr "Support: fix holes at layer %d"
 msgid "Support: propagate branches at layer %d"
 msgstr "Support: propagate branches at layer %d"
 
+#~ msgid "the 3mf is not compatible, load geometry data only!"
+#~ msgstr ""
+#~ "le 3mf n'est pas compatible, chargez uniquement les données de géométrie !"
+
 #~ msgid "Save configuration as:"
 #~ msgstr "Enregistrer la configuration sous :"
 
diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po
index bde02a5c8f..3e2a673890 100644
--- a/bbl/i18n/hu/BambuStudio_hu.po
+++ b/bbl/i18n/hu/BambuStudio_hu.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-30 14:28+0800\n"
+"POT-Creation-Date: 2022-09-01 09:20+0800\n"
 "PO-Revision-Date: 2022-07-27 22:05+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -346,9 +346,6 @@ msgstr ""
 msgid "Perform Recognition"
 msgstr "Felismerés"
 
-msgid "Clipping of view"
-msgstr ""
-
 msgid "Reset direction"
 msgstr ""
 
@@ -1418,6 +1415,18 @@ msgid ""
 "Note: Only the AMS slots loaded with the same material type can be selected."
 msgstr ""
 
+msgid "Enable AMS"
+msgstr ""
+
+msgid "Print with filaments in the AMS"
+msgstr ""
+
+msgid "Disable AMS"
+msgstr ""
+
+msgid "Print with the filament mounted on the back of chassis"
+msgstr ""
+
 msgid "Insertion update"
 msgstr ""
 
@@ -2971,7 +2980,7 @@ msgstr "Visszaállítás"
 msgid "Loading file: %s"
 msgstr ""
 
-msgid "The 3mf is not from Bambu lab, load geometry data only."
+msgid "The 3mf is not from Bambu Lab, load geometry data only."
 msgstr ""
 
 msgid "Load 3mf"
@@ -3001,7 +3010,7 @@ msgid ""
 "software.\n"
 msgstr ""
 
-msgid "the 3mf is not compatible, load geometry data only!"
+msgid "The 3mf is not compatible, load geometry data only!"
 msgstr ""
 
 msgid "Incompatible 3mf"
diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po
index bf3e51da47..7e0d210db2 100644
--- a/bbl/i18n/nl/BambuStudio_nl.po
+++ b/bbl/i18n/nl/BambuStudio_nl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-30 14:28+0800\n"
+"POT-Creation-Date: 2022-09-01 09:20+0800\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -335,9 +335,6 @@ msgstr "Face recognition"
 msgid "Perform Recognition"
 msgstr "Perform Recognition"
 
-msgid "Clipping of view"
-msgstr ""
-
 msgid "Reset direction"
 msgstr ""
 
@@ -1405,6 +1402,18 @@ msgid ""
 "Note: Only the AMS slots loaded with the same material type can be selected."
 msgstr ""
 
+msgid "Enable AMS"
+msgstr ""
+
+msgid "Print with filaments in the AMS"
+msgstr ""
+
+msgid "Disable AMS"
+msgstr ""
+
+msgid "Print with the filament mounted on the back of chassis"
+msgstr ""
+
 msgid "Insertion update"
 msgstr "Insertion update"
 
@@ -2995,7 +3004,7 @@ msgstr "Herstellen"
 msgid "Loading file: %s"
 msgstr "Bestand laden: %s"
 
-msgid "The 3mf is not from Bambu lab, load geometry data only."
+msgid "The 3mf is not from Bambu Lab, load geometry data only."
 msgstr ""
 
 msgid "Load 3mf"
@@ -3027,9 +3036,8 @@ msgid ""
 "software.\n"
 msgstr ""
 
-msgid "the 3mf is not compatible, load geometry data only!"
+msgid "The 3mf is not compatible, load geometry data only!"
 msgstr ""
-"Het 3mf bestand is niet compatibel, enkel de geometrische data wordt geladen!"
 
 msgid "Incompatible 3mf"
 msgstr "Onbruikbaar 3mf bestand"
@@ -6773,6 +6781,11 @@ msgstr "Support: fix holes at layer %d"
 msgid "Support: propagate branches at layer %d"
 msgstr "Support: propagate branches at layer %d"
 
+#~ msgid "the 3mf is not compatible, load geometry data only!"
+#~ msgstr ""
+#~ "Het 3mf bestand is niet compatibel, enkel de geometrische data wordt "
+#~ "geladen!"
+
 #~ msgid "Save configuration as:"
 #~ msgstr "Bewaar configuratie als:"
 
diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po
index c969f6af2d..d2ac23ef09 100644
--- a/bbl/i18n/sv/BambuStudio_sv.po
+++ b/bbl/i18n/sv/BambuStudio_sv.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-30 14:28+0800\n"
+"POT-Creation-Date: 2022-09-01 09:20+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -337,9 +337,6 @@ msgstr "Face recognition"
 msgid "Perform Recognition"
 msgstr "Perform Recognition"
 
-msgid "Clipping of view"
-msgstr ""
-
 msgid "Reset direction"
 msgstr ""
 
@@ -1387,6 +1384,18 @@ msgid ""
 "Note: Only the AMS slots loaded with the same material type can be selected."
 msgstr ""
 
+msgid "Enable AMS"
+msgstr ""
+
+msgid "Print with filaments in the AMS"
+msgstr ""
+
+msgid "Disable AMS"
+msgstr ""
+
+msgid "Print with the filament mounted on the back of chassis"
+msgstr ""
+
 msgid "Insertion update"
 msgstr "Insertion update"
 
@@ -2954,7 +2963,7 @@ msgstr "Återställ"
 msgid "Loading file: %s"
 msgstr "Laddar fil: %s"
 
-msgid "The 3mf is not from Bambu lab, load geometry data only."
+msgid "The 3mf is not from Bambu Lab, load geometry data only."
 msgstr ""
 
 msgid "Load 3mf"
@@ -2986,8 +2995,8 @@ msgid ""
 "software.\n"
 msgstr ""
 
-msgid "the 3mf is not compatible, load geometry data only!"
-msgstr "3mf ej kompatibel, laddar endast geometrin !"
+msgid "The 3mf is not compatible, load geometry data only!"
+msgstr ""
 
 msgid "Incompatible 3mf"
 msgstr "Ej kompatibel 3mf"
@@ -6615,6 +6624,9 @@ msgstr "Support: fix holes at layer %d"
 msgid "Support: propagate branches at layer %d"
 msgstr "Support: propagate branches at layer %d"
 
+#~ msgid "the 3mf is not compatible, load geometry data only!"
+#~ msgstr "3mf ej kompatibel, laddar endast geometrin !"
+
 #~ msgid "Save configuration as:"
 #~ msgstr "Spara konfigurationen som:"
 
diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
index 258da0caf2..e682c912f3 100644
--- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
+++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-08-30 14:28+0800\n"
+"POT-Creation-Date: 2022-09-01 09:20+0800\n"
 "PO-Revision-Date: 2022-08-05 11:49+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
@@ -336,9 +336,6 @@ msgstr "外观面检测"
 msgid "Perform Recognition"
 msgstr "执行检测"
 
-msgid "Clipping of view"
-msgstr "剪切视图"
-
 msgid "Reset direction"
 msgstr "重置方向"
 
@@ -1352,6 +1349,18 @@ msgid ""
 "Note: Only the AMS slots loaded with the same material type can be selected."
 msgstr "仅允许选择放入同种材质耗材丝的AMS槽位"
 
+msgid "Enable AMS"
+msgstr ""
+
+msgid "Print with filaments in the AMS"
+msgstr ""
+
+msgid "Disable AMS"
+msgstr ""
+
+msgid "Print with the filament mounted on the back of chassis"
+msgstr ""
+
 msgid "Insertion update"
 msgstr "插入料时更新"
 
@@ -2267,7 +2276,7 @@ msgid "Load a model"
 msgstr "加载模型"
 
 msgid "Import Configs"
-msgstr "导入配置"
+msgstr "导入预设"
 
 msgid "Load configs"
 msgstr ""
@@ -2294,10 +2303,10 @@ msgid "Export current plate as G-code"
 msgstr "导出当前盘的G-code"
 
 msgid "Export &Configs"
-msgstr "导出配置"
+msgstr "导出预设"
 
 msgid "Export current configuration to files"
-msgstr ""
+msgstr "导出当前选择的预设"
 
 msgid "Export"
 msgstr "导出"
@@ -2426,7 +2435,7 @@ msgstr "选择目录"
 #, c-format, boost-format
 msgid "There is %d config exported. (Only non-system configs)"
 msgid_plural "There are %d configs exported. (Only non-system configs)"
-msgstr[0] "共导出 %d 个配置（仅包含非系统配置）"
+msgstr[0] "共导出 %d 组预设（仅包含当前使用的非系统的预设）"
 
 msgid "Export result"
 msgstr "导出结果"
@@ -2438,7 +2447,7 @@ msgstr ""
 msgid "There is %d config imported. (Only non-system and compatible configs)"
 msgid_plural ""
 "There are %d configs imported. (Only non-system and compatible configs)"
-msgstr[0] "共导入 %d 个配置（仅包含非系统且兼容的配置）"
+msgstr[0] "共导入 %d 组预设（仅包含非系统且与当前配置兼容的预设）"
 
 msgid "Import result"
 msgstr "导入结果"
@@ -2896,7 +2905,7 @@ msgstr "恢复"
 msgid "Loading file: %s"
 msgstr "加载文件：%s"
 
-msgid "The 3mf is not from Bambu lab, load geometry data only."
+msgid "The 3mf is not from Bambu Lab, load geometry data only."
 msgstr ""
 
 msgid "Load 3mf"
@@ -2926,8 +2935,8 @@ msgid ""
 "software.\n"
 msgstr ""
 
-msgid "the 3mf is not compatible, load geometry data only!"
-msgstr "该3mf文件不兼容，仅加载几何数据！"
+msgid "The 3mf is not compatible, load geometry data only!"
+msgstr ""
 
 msgid "Incompatible 3mf"
 msgstr "不兼容的3mf"
@@ -6356,6 +6365,12 @@ msgstr "支撑：正在修补层%d的空洞"
 msgid "Support: propagate branches at layer %d"
 msgstr "支撑：正在生长层%d的树枝"
 
+#~ msgid "Clipping of view"
+#~ msgstr "剪切视图"
+
+#~ msgid "the 3mf is not compatible, load geometry data only!"
+#~ msgstr "该3mf文件不兼容，仅加载几何数据！"
+
 #~ msgid "Save configuration as:"
 #~ msgstr "预设另存为："
 
diff --git a/resources/i18n/de/BambuStudio.mo b/resources/i18n/de/BambuStudio.mo
index 49fee70c11..13bbb7d580 100644
Binary files a/resources/i18n/de/BambuStudio.mo and b/resources/i18n/de/BambuStudio.mo differ
diff --git a/resources/i18n/en/BambuStudio.mo b/resources/i18n/en/BambuStudio.mo
index c4cc99d587..2173f8a0df 100644
Binary files a/resources/i18n/en/BambuStudio.mo and b/resources/i18n/en/BambuStudio.mo differ
diff --git a/resources/i18n/es/BambuStudio.mo b/resources/i18n/es/BambuStudio.mo
index 11342d6c0d..98293b9962 100644
Binary files a/resources/i18n/es/BambuStudio.mo and b/resources/i18n/es/BambuStudio.mo differ
diff --git a/resources/i18n/fr/BambuStudio.mo b/resources/i18n/fr/BambuStudio.mo
index 1d09f32999..f9283dd05a 100644
Binary files a/resources/i18n/fr/BambuStudio.mo and b/resources/i18n/fr/BambuStudio.mo differ
diff --git a/resources/i18n/hu/BambuStudio.mo b/resources/i18n/hu/BambuStudio.mo
index 5a78d2fa43..1cba109af0 100644
Binary files a/resources/i18n/hu/BambuStudio.mo and b/resources/i18n/hu/BambuStudio.mo differ
diff --git a/resources/i18n/nl/BambuStudio.mo b/resources/i18n/nl/BambuStudio.mo
index 32e3a2e94a..a8a112f11a 100644
Binary files a/resources/i18n/nl/BambuStudio.mo and b/resources/i18n/nl/BambuStudio.mo differ
diff --git a/resources/i18n/sv/BambuStudio.mo b/resources/i18n/sv/BambuStudio.mo
index b976530516..b596012bee 100644
Binary files a/resources/i18n/sv/BambuStudio.mo and b/resources/i18n/sv/BambuStudio.mo differ
diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo
index 89fb2113ab..4d6f1251a1 100644
Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ