diff --git a/resources/profiles/Creality.json b/resources/profiles/Creality.json index bcf6656b12..d45c85407a 100644 --- a/resources/profiles/Creality.json +++ b/resources/profiles/Creality.json @@ -158,6 +158,22 @@ "name": "0.10mm HighDetail @Creality Ender5Pro (2019) 0.3", "sub_path": "process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.3.json" }, + { + "name": "0.12mm Detail @Creality Ender3 0.2", + "sub_path": "process/0.12mm Fine @Creality Ender3 0.2.json" + }, + { + "name": "0.12mm Detail @Creality Ender3 0.4", + "sub_path": "process/0.12mm Fine @Creality Ender3 0.4.json" + }, + { + "name": "0.12mm Detail @Creality Ender3 0.6", + "sub_path": "process/0.12mm Fine @Creality Ender3 0.6.json" + }, + { + "name": "0.12mm Detail @Creality Ender3 0.8", + "sub_path": "process/0.12mm Fine @Creality Ender3 0.8.json" + }, { "name": "0.12mm Fine @Creality CR10Max", "sub_path": "process/0.12mm Fine @Creality CR10Max.json" @@ -234,6 +250,22 @@ "name": "0.16mm Optimal @Creality Ender3V2Neo", "sub_path": "process/0.16mm Optimal @Creality Ender3V2Neo.json" }, + { + "name": "0.16mm Optimal @Creality Ender3 0.2", + "sub_path": "process/0.16mm Optimal @Creality Ender3 0.2.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3 0.4", + "sub_path": "process/0.16mm Optimal @Creality Ender3 0.4.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3 0.6", + "sub_path": "process/0.16mm Optimal @Creality Ender3 0.6.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3 0.8", + "sub_path": "process/0.16mm Optimal @Creality Ender3 0.8.json" + }, { "name": "0.16mm Optimal @Creality Ender3S1", "sub_path": "process/0.16mm Optimal @Creality Ender3S1.json" @@ -326,6 +358,22 @@ "name": "0.20mm Standard @Creality Ender3", "sub_path": "process/0.20mm Standard @Creality Ender3.json" }, + { + "name": "0.20mm Standard @Creality Ender3 0.2", + "sub_path": "process/0.20mm Standard @Creality Ender3 0.2.json" + }, + { + "name": "0.20mm Standard @Creality Ender3 0.4", + "sub_path": "process/0.20mm Standard @Creality Ender3 0.4.json" + }, + { + "name": "0.20mm Standard @Creality Ender3 0.6", + "sub_path": "process/0.20mm Standard @Creality Ender3 0.6.json" + }, + { + "name": "0.20mm Standard @Creality Ender3 0.8", + "sub_path": "process/0.20mm Standard @Creality Ender3 0.8.json" + }, { "name": "0.20mm Standard @Creality Ender3V2", "sub_path": "process/0.20mm Standard @Creality Ender3V2.json" @@ -406,6 +454,26 @@ "name": "0.20mm Standard @Creality K1Max (0.4 nozzle)", "sub_path": "process/0.20mm Standard @Creality K1Max (0.4 nozzle).json" }, + { + "name": "0.24mm Draft @Creality Ender3 0.2", + "sub_path": "process/0.24mm Draft @Creality Ender3 0.2.json" + }, + { + "name": "0.24mm Draft @Creality Ender3 0.4", + "sub_path": "process/0.24mm Draft @Creality Ender3 0.4.json" + }, + { + "name": "0.24mm Draft @Creality Ender3 0.6", + "sub_path": "process/0.24mm Draft @Creality Ender3 0.6.json" + }, + { + "name": "0.20mm Standard @Creality K1Max (0.4 nozzle)", + "sub_path": "process/0.20mm Standard @Creality K1Max (0.4 nozzle).json" + }, + { + "name": "0.24mm Draft @Creality Ender3 0.8", + "sub_path": "process/0.24mm Draft @Creality Ender3 0.8.json" + }, { "name": "0.24mm Draft @Creality CR10Max", "sub_path": "process/0.24mm Draft @Creality CR10Max.json" @@ -450,6 +518,22 @@ "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.8", "sub_path": "process/0.24mm Draft @Creality Ender5Pro (2019) 0.8.json" }, + { + "name": "0.28mm SuperDraft @Creality Ender3 0.2", + "sub_path": "process/0.28mm SuperDraft @Creality Ender3 0.2.json" + }, + { + "name": "0.28mm SuperDraft @Creality Ender3 0.4", + "sub_path": "process/0.28mm SuperDraft @Creality Ender3 0.4.json" + }, + { + "name": "0.28mm SuperDraft @Creality Ender3 0.6", + "sub_path": "process/0.28mm SuperDraft @Creality Ender3 0.6.json" + }, + { + "name": "0.28mm SuperDraft @Creality Ender3 0.8", + "sub_path": "process/0.28mm SuperDraft @Creality Ender3 0.8.json" + }, { "name": "0.28mm SuperDraft @Creality CR-6 0.4", "sub_path": "process/0.28mm SuperDraft @Creality CR-6 0.4.json" @@ -814,6 +898,10 @@ "name": "Creality Ender-3 V2 0.4 nozzle", "sub_path": "machine/Creality Ender-3 V2 0.4 nozzle.json" }, + { + "name": "Creality Ender-3 0.2 nozzle", + "sub_path": "machine/Creality Ender-3 0.2 nozzle.json" + }, { "name": "Creality Ender-3 V2 Neo 0.4 nozzle", "sub_path": "machine/Creality Ender-3 V2 Neo 0.4 nozzle.json" @@ -822,6 +910,14 @@ "name": "Creality Ender-3 0.4 nozzle", "sub_path": "machine/Creality Ender-3 0.4 nozzle.json" }, + { + "name": "Creality Ender-3 0.6 nozzle", + "sub_path": "machine/Creality Ender-3 0.6 nozzle.json" + }, + { + "name": "Creality Ender-3 0.8 nozzle", + "sub_path": "machine/Creality Ender-3 0.8 nozzle.json" + }, { "name": "Creality Ender-3 S1 0.4 nozzle", "sub_path": "machine/Creality Ender-3 S1 0.4 nozzle.json" diff --git a/resources/profiles/Creality/filament/Creality Generic ABS.json b/resources/profiles/Creality/filament/Creality Generic ABS.json index f7d9472db2..552b178a9e 100644 --- a/resources/profiles/Creality/filament/Creality Generic ABS.json +++ b/resources/profiles/Creality/filament/Creality Generic ABS.json @@ -19,7 +19,10 @@ "Creality CR-6 Max 0.4 nozzle", "Creality CR-6 Max 0.6 nozzle", "Creality CR-6 Max 0.8 nozzle", + "Creality Ender-3 0.2 nozzle", "Creality Ender-3 0.4 nozzle", + "Creality Ender-3 0.6 nozzle", + "Creality Ender-3 0.8 nozzle", "Creality Ender-3 V2 0.4 nozzle", "Creality Ender-3 V2 Neo 0.4 nozzle", "Creality Ender-3 S1 0.4 nozzle", diff --git a/resources/profiles/Creality/filament/Creality Generic ASA.json b/resources/profiles/Creality/filament/Creality Generic ASA.json index 45f198572f..5a893dd39d 100644 --- a/resources/profiles/Creality/filament/Creality Generic ASA.json +++ b/resources/profiles/Creality/filament/Creality Generic ASA.json @@ -19,8 +19,11 @@ "Creality CR-6 Max 0.4 nozzle", "Creality CR-6 Max 0.6 nozzle", "Creality CR-6 Max 0.8 nozzle", - "Creality Ender-3 0.4 nozzle", "Creality Ender-3 V2 0.4 nozzle", + "Creality Ender-3 0.2 nozzle", + "Creality Ender-3 0.4 nozzle", + "Creality Ender-3 0.6 nozzle", + "Creality Ender-3 0.8 nozzle", "Creality Ender-3 V2 Neo 0.4 nozzle", "Creality Ender-3 S1 0.4 nozzle", "Creality Ender-3 S1 Pro 0.4 nozzle", diff --git a/resources/profiles/Creality/filament/Creality Generic PETG.json b/resources/profiles/Creality/filament/Creality Generic PETG.json index 733d2d1836..1c880e8a8d 100644 --- a/resources/profiles/Creality/filament/Creality Generic PETG.json +++ b/resources/profiles/Creality/filament/Creality Generic PETG.json @@ -29,7 +29,10 @@ "Creality CR-6 Max 0.4 nozzle", "Creality CR-6 Max 0.6 nozzle", "Creality CR-6 Max 0.8 nozzle", + "Creality Ender-3 0.2 nozzle", "Creality Ender-3 0.4 nozzle", + "Creality Ender-3 0.6 nozzle", + "Creality Ender-3 0.8 nozzle", "Creality Ender-3 V2 0.4 nozzle", "Creality Ender-3 V2 Neo 0.4 nozzle", "Creality Ender-3 S1 0.4 nozzle", diff --git a/resources/profiles/Creality/filament/Creality Generic PLA.json b/resources/profiles/Creality/filament/Creality Generic PLA.json index a5382a0d34..81a45951bb 100644 --- a/resources/profiles/Creality/filament/Creality Generic PLA.json +++ b/resources/profiles/Creality/filament/Creality Generic PLA.json @@ -20,7 +20,10 @@ "Creality CR-6 Max 0.4 nozzle", "Creality CR-6 Max 0.6 nozzle", "Creality CR-6 Max 0.8 nozzle", + "Creality Ender-3 0.2 nozzle", "Creality Ender-3 0.4 nozzle", + "Creality Ender-3 0.6 nozzle", + "Creality Ender-3 0.8 nozzle", "Creality Ender-3 V2 0.4 nozzle", "Creality Ender-3 V2 Neo 0.4 nozzle", "Creality Ender-3 S1 0.4 nozzle", diff --git a/resources/profiles/Creality/machine/Creality Ender-3 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 0.2 nozzle.json new file mode 100644 index 0000000000..c6ab1d5f7a --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-3 0.2 nozzle.json @@ -0,0 +1,112 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3", + "default_print_profile": "0.20mm Standard @Creality Ender3 0.2", + "thumbnails": [""], + "nozzle_diameter": [ + "0.2" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "25", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.36" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "4" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-3 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 0.4 nozzle.json index b412fbaf6f..52602c47c4 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 0.4 nozzle.json @@ -7,7 +7,7 @@ "inherits": "fdm_creality_common", "printer_model": "Creality Ender-3", "printer_structure": "i3", - "default_print_profile": "0.20mm Standard @Creality Ender3", + "default_print_profile": "0.20mm Standard @Creality Ender3 0.4", "thumbnails": [""], "nozzle_diameter": [ "0.4" diff --git a/resources/profiles/Creality/machine/Creality Ender-3 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 0.6 nozzle.json new file mode 100644 index 0000000000..8184cf4943 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-3 0.6 nozzle.json @@ -0,0 +1,112 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3", + "default_print_profile": "0.20mm Standard @Creality Ender3 0.6", + "thumbnails": [""], + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "25", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.36" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "4" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-3 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 0.8 nozzle.json new file mode 100644 index 0000000000..b56a822a30 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-3 0.8 nozzle.json @@ -0,0 +1,112 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3", + "default_print_profile": "0.20mm Standard @Creality Ender3 0.8", + "thumbnails": [""], + "nozzle_diameter": [ + "0.8" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "25", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.36" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "4" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json index 43049f4db6..e36e3bf6f9 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json @@ -6,7 +6,6 @@ "instantiation": "true", "inherits": "fdm_creality_common", "printer_model": "Creality Ender-3 V2", - "printer_structure": "i3", "default_filament_profile": [ "Creality Generic PLA" ], diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json.bak b/resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json.bak new file mode 100644 index 0000000000..43049f4db6 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json.bak @@ -0,0 +1,26 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality Ender-3 V2 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V2", + "printer_structure": "i3", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "default_print_profile": "0.20mm Standard @Creality Ender3V2", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/resources/profiles/Creality/machine/Creality Ender-3.json b/resources/profiles/Creality/machine/Creality Ender-3.json index bbd6b6424c..5c061600b9 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3.json +++ b/resources/profiles/Creality/machine/Creality Ender-3.json @@ -2,7 +2,7 @@ "type": "machine_model", "name": "Creality Ender-3", "model_id": "Creality-Ender3", - "nozzle_diameter": "0.4", + "nozzle_diameter": "0.2;0.4;0.6;0.8", "machine_tech": "FFF", "family": "Creality", "bed_model": "creality_ender3v2_buildplate_model.stl", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json new file mode 100644 index 0000000000..2e4347739b --- /dev/null +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.2", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json new file mode 100644 index 0000000000..68cb76aeef --- /dev/null +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json new file mode 100644 index 0000000000..9e03ec13dd --- /dev/null +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.66", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.54", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.6", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json new file mode 100644 index 0000000000..0ceadf8e36 --- /dev/null +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.7", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.8", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json new file mode 100644 index 0000000000..26de209709 --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.2", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json new file mode 100644 index 0000000000..c57f64c041 --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json new file mode 100644 index 0000000000..8cce719d05 --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.66", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.54", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.6", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json new file mode 100644 index 0000000000..493e91839d --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.7", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.8", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json new file mode 100644 index 0000000000..01620cfa09 --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.20", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.2", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json new file mode 100644 index 0000000000..786de08cdb --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json new file mode 100644 index 0000000000..8d1ee9ba06 --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.66", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.54", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.6", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json new file mode 100644 index 0000000000..ad84a4e627 --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.7", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.8", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.2.json new file mode 100644 index 0000000000..492b2675bb --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.2", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.4.json new file mode 100644 index 0000000000..ccf0dd7258 --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.6", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.6.json new file mode 100644 index 0000000000..020c8e13a7 --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.66", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.54", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.6", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.8.json new file mode 100644 index 0000000000..97df4f70ba --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json new file mode 100644 index 0000000000..7d9f3fe5ff --- /dev/null +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Draft @Creality Ender3 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.28", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.25", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.25", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.22", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.25", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.18", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.2", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json new file mode 100644 index 0000000000..2ba5989636 --- /dev/null +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Draft @Creality Ender3 0.4", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.28", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json new file mode 100644 index 0000000000..acf78ef95a --- /dev/null +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Draft @Creality Ender3 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.28", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.63", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.66", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.63", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.66", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.54", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.6", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json new file mode 100644 index 0000000000..502148a517 --- /dev/null +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm Draft @Creality Ender3 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.28", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.85", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.85", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.85", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.85", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.82", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.7", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.8", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa.json b/resources/profiles/Prusa.json index 3fd38c0cd2..74d084262b 100644 --- a/resources/profiles/Prusa.json +++ b/resources/profiles/Prusa.json @@ -33,43 +33,87 @@ { "name": "0.20mm Standard @MINI", "sub_path": "process/0.20mm Standard @MINI.json" + }, + { + "name": "0.05mm UltraDetail @MK3S 0.25", + "sub_path": "process/0.05mm UltraDetail @MK3S 0.25.json" + }, + { + "name": "0.05mm UltraDetail @MK3S 0.4", + "sub_path": "process/0.05mm UltraDetail @MK3S 0.4.json" + }, + { + "name": "0.07mm UltraDetail @MK3S 0.25", + "sub_path": "process/0.07mm UltraDetail @MK3S 0.25.json" }, { - "name": "0.05mm UltraDetail @MK3S", - "sub_path": "process/0.05mm UltraDetail @MK3S.json" + "name": "0.07mm UltraDetail @MK3S 0.4", + "sub_path": "process/0.07mm UltraDetail @MK3S 0.4.json" + }, + { + "name": "0.10mm Detail @MK3S 0.25", + "sub_path": "process/0.10mm Detail @MK3S 0.25.json" }, { - "name": "0.07mm UltraDetail @MK3S", - "sub_path": "process/0.07mm UltraDetail @MK3S.json" + "name": "0.10mm Detail @MK3S 0.4", + "sub_path": "process/0.10mm Detail @MK3S 0.4.json" + }, + { + "name": "0.15mm Quality @MK3S 0.25", + "sub_path": "process/0.15mm Quality @MK3S 0.25.json" }, { - "name": "0.10mm Detail @MK3S", - "sub_path": "process/0.10mm Detail @MK3S.json" + "name": "0.15mm Quality @MK3S 0.4", + "sub_path": "process/0.15mm Quality @MK3S 0.4.json" }, { - "name": "0.15mm Quality @MK3S", - "sub_path": "process/0.15mm Quality @MK3S.json" + "name": "0.15mm Speed @MK3S 0.4", + "sub_path": "process/0.15mm Speed @MK3S 0.4.json" + }, + { + "name": "0.20mm Standard @MK3S 0.4", + "sub_path": "process/0.20mm Standard @MK3S 0.4.json" }, { - "name": "0.15mm Speed @MK3S", - "sub_path": "process/0.15mm Speed @MK3S.json" + "name": "0.20mm Speed @MK3S 0.4", + "sub_path": "process/0.20mm Speed @MK3S 0.4.json" }, { - "name": "0.20mm Quality @MK3S", - "sub_path": "process/0.20mm Quality @MK3S.json" + "name": "0.30mm Draft @MK3S 0.4", + "sub_path": "process/0.30mm Draft @MK3S 0.4.json" }, - { - "name": "0.20mm Standard @MK3S", - "sub_path": "process/0.20mm Standard @MK3S.json" + { + "name": "0.15mm Detail @MK3S 0.6", + "sub_path": "process/0.15mm Detail @MK3S 0.6.json" }, - { - "name": "0.20mm Speed @MK3S", - "sub_path": "process/0.20mm Speed @MK3S.json" + { + "name": "0.20mm Detail @MK3S 0.6", + "sub_path": "process/0.20mm Detail @MK3S 0.6.json" }, - { - "name": "0.30mm Draft @MK3S", - "sub_path": "process/0.30mm Draft @MK3S.json" + { + "name": "0.30mm Quality @MK3S 0.6", + "sub_path": "process/0.30mm Quality @MK3S 0.6.json" }, + { + "name": "0.35mm Speed @MK3S 0.6", + "sub_path": "process/0.35mm Speed @MK3S 0.6.json" + }, + { + "name": "0.40mm Draft @MK3S 0.6", + "sub_path": "process/0.40mm Draft @MK3S 0.6.json" + }, + { + "name": "0.30mm Detail @MK3S 0.8", + "sub_path": "process/0.30mm Detail @MK3S 0.8.json" + }, + { + "name": "0.40mm Quality @MK3S 0.8", + "sub_path": "process/0.40mm Quality @MK3S 0.8.json" + }, + { + "name": "0.55mm Draft @MK3S 0.8", + "sub_path": "process/0.55mm Draft @MK3S 0.8.json" + }, { "name": "0.08mm Standard @MK4", "sub_path": "process/0.08mm Standard @MK4.json" @@ -216,11 +260,23 @@ { "name": "fdm_machine_common", "sub_path": "machine/fdm_machine_common.json" + }, + { + "name": "Prusa MK3S 0.25 nozzle", + "sub_path": "machine/Prusa MK3S 0.25 nozzle.json" }, { "name": "Prusa MK3S 0.4 nozzle", "sub_path": "machine/Prusa MK3S 0.4 nozzle.json" }, + { + "name": "Prusa MK3S 0.6 nozzle", + "sub_path": "machine/Prusa MK3S 0.6 nozzle.json" + }, + { + "name": "Prusa MK3S 0.8 nozzle", + "sub_path": "machine/Prusa MK3S 0.8 nozzle.json" + }, { "name": "Prusa MK4 0.25 nozzle", "sub_path": "machine/Prusa MK4 0.25 nozzle.json" diff --git a/resources/profiles/Prusa/machine/Prusa MK3S 0.25 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK3S 0.25 nozzle.json new file mode 100644 index 0000000000..05d270cddc --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa MK3S 0.25 nozzle.json @@ -0,0 +1,57 @@ +{ + "type": "machine", + "setting_id": "GM003", + "name": "Prusa MK3S 0.25 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_machine_common", + "printer_model": "MK3S", + "default_filament_profile": [ + "Prusa Generic PLA" + ], + "default_print_profile": "0.20mm Speed @MK3S 0.25", + "nozzle_diameter": [ + "0.2" + ], + "bed_exclude_area": [ + "0x0" + ], + "printable_area": [ + "0x0", + "250x0", + "250x210", + "0x210" + ], + "machine_max_acceleration_retracting": [ + "2500", + "2500" + ], + "machine_max_speed_e": [ + "120", + "120" + ], + "machine_max_speed_x": [ + "200", + "200" + ], + "machine_max_speed_y": [ + "200", + "200" + ], + "host_type": "prusalink", + "printable_height": "210", + "machine_pause_gcode": "M601", + "machine_start_gcode": "M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}", + "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3S|QUALITY @MK3S|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors\n; max_layer_z = [max_layer_z]", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n", + "scan_first_layer": "0", + "machine_load_filament_time": "17", + "machine_unload_filament_time": "16", + "nozzle_type": "hardened_steel", + "thumbnails": [ + "160x120" + ], + "auxiliary_fan": "0" +} diff --git a/resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json index 9f05eb7c8e..2739255777 100644 --- a/resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json +++ b/resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json @@ -9,7 +9,7 @@ "default_filament_profile": [ "Prusa Generic PLA" ], - "default_print_profile": "0.20mm Speed @MK3S", + "default_print_profile": "0.20mm Speed @MK3S 0.4", "nozzle_diameter": [ "0.4" ], diff --git a/resources/profiles/Prusa/machine/Prusa MK3S 0.6 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK3S 0.6 nozzle.json new file mode 100644 index 0000000000..07cd3fb56a --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa MK3S 0.6 nozzle.json @@ -0,0 +1,57 @@ +{ + "type": "machine", + "setting_id": "GM003", + "name": "Prusa MK3S 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_machine_common", + "printer_model": "MK3S", + "default_filament_profile": [ + "Prusa Generic PLA" + ], + "default_print_profile": "0.30mm Quality @MK3S 0.6", + "nozzle_diameter": [ + "0.6" + ], + "bed_exclude_area": [ + "0x0" + ], + "printable_area": [ + "0x0", + "250x0", + "250x210", + "0x210" + ], + "machine_max_acceleration_retracting": [ + "2500", + "2500" + ], + "machine_max_speed_e": [ + "120", + "120" + ], + "machine_max_speed_x": [ + "200", + "200" + ], + "machine_max_speed_y": [ + "200", + "200" + ], + "host_type": "prusalink", + "printable_height": "210", + "machine_pause_gcode": "M601", + "machine_start_gcode": "M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}", + "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3S|QUALITY @MK3S|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors\n; max_layer_z = [max_layer_z]", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n", + "scan_first_layer": "0", + "machine_load_filament_time": "17", + "machine_unload_filament_time": "16", + "nozzle_type": "hardened_steel", + "thumbnails": [ + "160x120" + ], + "auxiliary_fan": "0" +} diff --git a/resources/profiles/Prusa/machine/Prusa MK3S 0.8 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK3S 0.8 nozzle.json new file mode 100644 index 0000000000..0ecc0f7646 --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa MK3S 0.8 nozzle.json @@ -0,0 +1,57 @@ +{ + "type": "machine", + "setting_id": "GM003", + "name": "Prusa MK3S 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_machine_common", + "printer_model": "MK3S", + "default_filament_profile": [ + "Prusa Generic PLA" + ], + "default_print_profile": "0.15mm Detail @MK3S 0.8", + "nozzle_diameter": [ + "0.8" + ], + "bed_exclude_area": [ + "0x0" + ], + "printable_area": [ + "0x0", + "250x0", + "250x210", + "0x210" + ], + "machine_max_acceleration_retracting": [ + "2500", + "2500" + ], + "machine_max_speed_e": [ + "120", + "120" + ], + "machine_max_speed_x": [ + "200", + "200" + ], + "machine_max_speed_y": [ + "200", + "200" + ], + "host_type": "prusalink", + "printable_height": "210", + "machine_pause_gcode": "M601", + "machine_start_gcode": "M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.13.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}", + "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3S|QUALITY @MK3S|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors\n; max_layer_z = [max_layer_z]", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n", + "scan_first_layer": "0", + "machine_load_filament_time": "17", + "machine_unload_filament_time": "16", + "nozzle_type": "hardened_steel", + "thumbnails": [ + "160x120" + ], + "auxiliary_fan": "0" +} diff --git a/resources/profiles/Prusa/machine/Prusa MK3S.json b/resources/profiles/Prusa/machine/Prusa MK3S.json index 3cb76e93c8..f00ea59dfa 100644 --- a/resources/profiles/Prusa/machine/Prusa MK3S.json +++ b/resources/profiles/Prusa/machine/Prusa MK3S.json @@ -2,11 +2,11 @@ "type": "machine_model", "name": "Prusa MK3S", "model_id": "MK3S", - "nozzle_diameter": "0.4", + "nozzle_diameter": "0.25;0.4;0.6;0.8", "machine_tech": "FFF", "family": "Prusa", "bed_model": "mk3_bed.stl", "bed_texture": "mk3.svg", "hotend_model": "", "default_materials": "Prusa Generic ABS;Prusa Generic PLA;Prusa Generic PLA-CF;Prusa Generic PETG;Prusa Generic TPU;Prusa Generic ASA;Prusa Generic PC;Prusa Generic PVA;Prusa Generic PA;Prusa Generic PA-CF" -} +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.05mm UltraDetail @MK3S 0.25.json b/resources/profiles/Prusa/process/0.05mm UltraDetail @MK3S 0.25.json new file mode 100644 index 0000000000..427b2c0a6d --- /dev/null +++ b/resources/profiles/Prusa/process/0.05mm UltraDetail @MK3S 0.25.json @@ -0,0 +1,47 @@ +{ + "type": "process", + "print_settings_id": "0.05mm UltraDetail @MK3S 0.25", + "name": "0.05mm UltraDetail @MK3S 0.25", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "10", + "bridge_acceleration": "300", + "bridge_flow": "1", + "bridge_speed": "25", + "gap_infill_speed": "20", + "inner_wall_acceleration": "300", + "inner_wall_speed": "30", + "internal_solid_infill_speed": "30", + "layer_height": "0.05", + "outer_wall_speed": "20", + "raft_contact_distance": "0.1", + "small_perimeter_speed": "20", + "sparse_infill_acceleration": "800", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "30", + "support_base_pattern_spacing": "1.5", + "support_bottom_z_distance": "0.1", + "support_interface_speed": "24", + "support_object_xy_distance": "0.27", + "support_speed": "30", + "support_top_z_distance": "0.1", + "thick_bridges": "1", + "top_shell_layers": "14", + "top_surface_speed": "20", + "wall_loops": "3", + "initial_layer_infill_speed": "30", + "initial_layer_line_width": "0.3", + "inner_wall_line_width": "0.25", + "internal_solid_infill_line_width": "0.25", + "is_custom_defined": "0", + "line_width": "0.25", + "outer_wall_line_width": "0.25", + "sparse_infill_line_width": "0.25", + "support_line_width": "0.25", + "top_surface_line_width": "0.25", + "compatible_printers": [ + "Prusa MK3S 0.25 nozzle" + ] + +} diff --git a/resources/profiles/Prusa/process/0.05mm UltraDetail @MK3S 0.4.json b/resources/profiles/Prusa/process/0.05mm UltraDetail @MK3S 0.4.json new file mode 100644 index 0000000000..0fb58b0636 --- /dev/null +++ b/resources/profiles/Prusa/process/0.05mm UltraDetail @MK3S 0.4.json @@ -0,0 +1,44 @@ +{ + "type": "process", + "print_settings_id": "0.05mm UltraDetail @MK3S 0.4", + "name": "0.05mm UltraDetail @MK3S 0.4", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "10", + "bridge_acceleration": "300", + "bridge_flow": "0.6", + "bridge_speed": "25", + "gap_infill_speed": "20", + "inner_wall_acceleration": "300", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "30", + "internal_solid_infill_line_width": "0.45", + "internal_solid_infill_speed": "30", + "layer_height": "0.05", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "outer_wall_speed": "20", + "raft_contact_distance": "0.1", + "small_perimeter_speed": "20", + "sparse_infill_acceleration": "800", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "30", + "support_base_pattern_spacing": "1.5", + "support_bottom_z_distance": "0.1", + "support_interface_speed": "24", + "support_line_width": "0.33", + "support_object_xy_distance": "0.27", + "support_speed": "30", + "support_top_z_distance": "0.1", + "thick_bridges": "1", + "top_shell_layers": "14", + "top_surface_line_width": "0.4", + "top_surface_speed": "20", + "wall_loops": "3", + "compatible_printers": [ + "Prusa MK3S 0.4 nozzle" + ] + +} diff --git a/resources/profiles/Prusa/process/0.07mm UltraDetail @MK3S 0.25.json b/resources/profiles/Prusa/process/0.07mm UltraDetail @MK3S 0.25.json new file mode 100644 index 0000000000..c297b69888 --- /dev/null +++ b/resources/profiles/Prusa/process/0.07mm UltraDetail @MK3S 0.25.json @@ -0,0 +1,45 @@ +{ + "type": "process", + "print_settings_id": "0.07mm UltraDetail @MK3S 0.25", + "name": "0.07mm UltraDetail @MK3S 0.25", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "8", + "bridge_acceleration": "300", + "bridge_flow": "0.6", + "bridge_speed": "25", + "gap_infill_speed": "20", + "inner_wall_acceleration": "300", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "30", + "internal_solid_infill_line_width": "0.45", + "layer_height": "0.07", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "outer_wall_speed": "20", + "raft_contact_distance": "0.1", + "small_perimeter_speed": "20", + "sparse_infill_acceleration": "800", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "gyroid", + "support_base_pattern_spacing": "1.5", + "support_bottom_z_distance": "0.1", + "support_interface_speed": "32", + "support_line_width": "0.33", + "support_object_xy_distance": "0.27", + "support_top_z_distance": "0.1", + "thick_bridges": "1", + "top_shell_layers": "10", + "top_surface_line_width": "0.4", + "internal_solid_infill_speed": "30", + "is_custom_defined": "0", + "sparse_infill_speed": "30", + "support_speed": "20", + "top_surface_speed": "20", + "wall_loops": "3", + "compatible_printers": [ + "Prusa MK3S 0.25 nozzle" + ] + +} diff --git a/resources/profiles/Prusa/process/0.07mm UltraDetail @MK3S 0.4.json b/resources/profiles/Prusa/process/0.07mm UltraDetail @MK3S 0.4.json new file mode 100644 index 0000000000..3a597ecc52 --- /dev/null +++ b/resources/profiles/Prusa/process/0.07mm UltraDetail @MK3S 0.4.json @@ -0,0 +1,44 @@ +{ + "type": "process", + "print_settings_id": "0.07mm UltraDetail @MK3S 0.4", + "name": "0.07mm UltraDetail @MK3S 0.4", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "8", + "bridge_acceleration": "300", + "bridge_flow": "0.6", + "bridge_speed": "25", + "gap_infill_speed": "20", + "inner_wall_acceleration": "300", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "30", + "internal_solid_infill_line_width": "0.45", + "internal_solid_infill_speed": "40", + "layer_height": "0.07", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "outer_wall_speed": "20", + "raft_contact_distance": "0.1", + "small_perimeter_speed": "20", + "sparse_infill_acceleration": "800", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "40", + "support_base_pattern_spacing": "1.5", + "support_bottom_z_distance": "0.1", + "support_interface_speed": "32", + "support_line_width": "0.33", + "support_object_xy_distance": "0.27", + "support_speed": "40", + "support_top_z_distance": "0.1", + "thick_bridges": "1", + "top_shell_layers": "10", + "top_surface_line_width": "0.4", + "top_surface_speed": "30", + "wall_loops": "3", + "compatible_printers": [ + "Prusa MK3S 0.4 nozzle" + ] + +} diff --git a/resources/profiles/Prusa/process/0.10mm Detail @MK3S 0.25.json b/resources/profiles/Prusa/process/0.10mm Detail @MK3S 0.25.json new file mode 100644 index 0000000000..74caace798 --- /dev/null +++ b/resources/profiles/Prusa/process/0.10mm Detail @MK3S 0.25.json @@ -0,0 +1,47 @@ +{ + "type": "process", + "print_settings_id": "0.10mm Detail @MK3S 0.25", + "name": "0.10mm Detail @MK3S 0.25", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "7", + "bridge_acceleration": "800", + "bridge_flow": "1", + "bridge_speed": "20", + "layer_height": "0.1", + "raft_contact_distance": "0.15", + "sparse_infill_acceleration": "1000", + "sparse_infill_pattern": "gyroid", + "support_base_pattern_spacing": "2", + "support_bottom_z_distance": "0.17", + "support_interface_speed": "40", + "support_object_xy_distance": "0.27", + "support_top_z_distance": "0.17", + "thick_bridges": "0", + "top_shell_layers": "8", + "gap_infill_speed": "30", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "20", + "initial_layer_line_width": "0.3", + "inner_wall_acceleration": "500", + "inner_wall_line_width": "0.25", + "inner_wall_speed": "30", + "internal_solid_infill_line_width": "0.25", + "internal_solid_infill_speed": "45", + "is_custom_defined": "0", + "line_width": "0.25", + "outer_wall_line_width": "0.25", + "outer_wall_speed": "20", + "small_perimeter_speed": "30", + "sparse_infill_line_width": "0.25", + "sparse_infill_speed": "45", + "support_line_width": "0.25", + "support_speed": "40", + "top_surface_line_width": "0.25", + "top_surface_speed": "30", + "wall_loops": "3", + "compatible_printers": [ + "Prusa MK3S 0.25 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.10mm Detail @MK3S 0.4.json b/resources/profiles/Prusa/process/0.10mm Detail @MK3S 0.4.json new file mode 100644 index 0000000000..68dfc86153 --- /dev/null +++ b/resources/profiles/Prusa/process/0.10mm Detail @MK3S 0.4.json @@ -0,0 +1,43 @@ +{ + "type": "process", + "print_settings_id": "0.10mm Detail @MK3S 0.4", + "name": "0.10mm Detail @MK3S 0.4", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "7", + "bridge_acceleration": "800", + "bridge_flow": "1", + "bridge_speed": "20", + "gap_infill_speed": "40", + "inner_wall_acceleration": "600", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "45", + "internal_solid_infill_line_width": "0.45", + "internal_solid_infill_speed": "80", + "layer_height": "0.1", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "outer_wall_speed": "25", + "raft_contact_distance": "0.15", + "small_perimeter_speed": "25", + "sparse_infill_acceleration": "1000", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "80", + "support_base_pattern_spacing": "2", + "support_bottom_z_distance": "0.17", + "support_interface_speed": "40", + "support_line_width": "0.35", + "support_object_xy_distance": "0.27", + "support_speed": "50", + "support_top_z_distance": "0.17", + "thick_bridges": "0", + "top_shell_layers": "8", + "top_surface_line_width": "0.4", + "top_surface_speed": "40", + "wall_loops": "3", + "compatible_printers": [ + "Prusa MK3S 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.15mm Detail @MK3S 0.6.json b/resources/profiles/Prusa/process/0.15mm Detail @MK3S 0.6.json new file mode 100644 index 0000000000..c2432e967e --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm Detail @MK3S 0.6.json @@ -0,0 +1,49 @@ +{ + "type": "process", + "print_settings_id": "0.15mm Detail @MK3S 0.6", + "name": "0.15mm Detail @MK3S 0.6", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "5", + "bridge_acceleration": "1000", + "bridge_flow": "1", + "bridge_speed": "25", + "gap_infill_speed": "40", + "inner_wall_acceleration": "800", + "layer_height": "0.15", + "outer_wall_speed": "25", + "raft_contact_distance": "0.2", + "small_perimeter_speed": "25", + "sparse_infill_acceleration": "1000", + "sparse_infill_pattern": "gyroid", + "support_base_pattern_spacing": "2", + "support_bottom_z_distance": "0.2", + "support_interface_speed": "40", + "support_object_xy_distance": "0.27", + "support_top_z_distance": "0.2", + "thick_bridges": "0", + "top_shell_layers": "6", + "bottom_shell_thickness": "0.6", + "elefant_foot_compensation": "0.2", + "infill_wall_overlap": "15%", + "initial_layer_line_width": "0.65", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "40", + "internal_solid_infill_line_width": "0.65", + "internal_solid_infill_speed": "70", + "is_custom_defined": "0", + "line_width": "0.65", + "outer_wall_line_width": "0.65", + "sparse_infill_line_width": "0.65", + "sparse_infill_speed": "70", + "support_line_width": "0.55", + "support_speed": "40", + "top_shell_thickness": "0.9", + "top_surface_line_width": "0.6", + "top_surface_speed": "45", + "wall_loops": "2", + "compatible_printers": [ + "Prusa MK3S 0.6 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.15mm Quality @MK3S 0.25.json b/resources/profiles/Prusa/process/0.15mm Quality @MK3S 0.25.json new file mode 100644 index 0000000000..701ca77317 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm Quality @MK3S 0.25.json @@ -0,0 +1,47 @@ +{ + "type": "process", + "print_settings_id": "0.15mm Quality @MK3S 0.25", + "name": "0.15mm Quality @MK3S 0.25", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "5", + "bridge_flow": "1", + "bridge_speed": "25", + "layer_height": "0.15", + "raft_contact_distance": "0.2", + "sparse_infill_acceleration": "1000", + "sparse_infill_pattern": "gyroid", + "support_base_pattern_spacing": "2", + "support_bottom_z_distance": "0.2", + "support_interface_speed": "40", + "support_object_xy_distance": "0.27", + "support_top_z_distance": "0.2", + "thick_bridges": "0", + "top_shell_layers": "6", + "bridge_acceleration": "500", + "gap_infill_speed": "30", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "30", + "initial_layer_line_width": "0.3", + "inner_wall_acceleration": "500", + "inner_wall_line_width": "0.27", + "inner_wall_speed": "30", + "internal_solid_infill_line_width": "0.27", + "internal_solid_infill_speed": "45", + "is_custom_defined": "0", + "line_width": "0.25", + "outer_wall_line_width": "0.27", + "outer_wall_speed": "20", + "small_perimeter_speed": "20", + "sparse_infill_line_width": "0.27", + "sparse_infill_speed": "45", + "support_line_width": "0.25", + "support_speed": "15", + "top_surface_line_width": "0.25", + "top_surface_speed": "30", + "wall_loops": "3", + "compatible_printers": [ + "Prusa MK3S 0.25 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.15mm Quality @MK3S 0.4.json b/resources/profiles/Prusa/process/0.15mm Quality @MK3S 0.4.json new file mode 100644 index 0000000000..6d3bf8cb2e --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm Quality @MK3S 0.4.json @@ -0,0 +1,43 @@ +{ + "type": "process", + "print_settings_id": "0.15mm Quality @MK3S 0.4", + "name": "0.15mm Quality @MK3S 0.4", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "5", + "bridge_acceleration": "1000", + "bridge_flow": "1", + "bridge_speed": "25", + "gap_infill_speed": "40", + "inner_wall_acceleration": "800", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "45", + "internal_solid_infill_line_width": "0.45", + "internal_solid_infill_speed": "80", + "layer_height": "0.15", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "outer_wall_speed": "25", + "raft_contact_distance": "0.2", + "small_perimeter_speed": "25", + "sparse_infill_acceleration": "1000", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "80", + "support_base_pattern_spacing": "2", + "support_bottom_z_distance": "0.2", + "support_interface_speed": "40", + "support_line_width": "0.35", + "support_object_xy_distance": "0.27", + "support_speed": "50", + "support_top_z_distance": "0.2", + "thick_bridges": "0", + "top_shell_layers": "6", + "top_surface_line_width": "0.4", + "top_surface_speed": "40", + "wall_loops": "2", + "compatible_printers": [ + "Prusa MK3S 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.15mm Speed @MK3S 0.4.json b/resources/profiles/Prusa/process/0.15mm Speed @MK3S 0.4.json new file mode 100644 index 0000000000..264927a613 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm Speed @MK3S 0.4.json @@ -0,0 +1,43 @@ +{ + "type": "process", + "print_settings_id": "0.15mm Speed @MK3S", + "name": "0.15mm Speed @MK3S", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "5", + "bridge_acceleration": "1000", + "bridge_flow": "1", + "bridge_speed": "25", + "gap_infill_speed": "40", + "inner_wall_acceleration": "800", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "60", + "internal_solid_infill_line_width": "0.45", + "internal_solid_infill_speed": "200", + "layer_height": "0.15", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "outer_wall_speed": "35", + "raft_contact_distance": "0.2", + "small_perimeter_speed": "25", + "sparse_infill_acceleration": "1000", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "200", + "support_base_pattern_spacing": "2", + "support_bottom_z_distance": "0.2", + "support_interface_speed": "40", + "support_line_width": "0.35", + "support_object_xy_distance": "0.27", + "support_speed": "50", + "support_top_z_distance": "0.2", + "thick_bridges": "0", + "top_shell_layers": "6", + "top_surface_line_width": "0.4", + "top_surface_speed": "50", + "wall_loops": "2", + "compatible_printers": [ + "Prusa MK3S 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.20mm Detail @MK3S 0.6.json b/resources/profiles/Prusa/process/0.20mm Detail @MK3S 0.6.json new file mode 100644 index 0000000000..819ec49e33 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm Detail @MK3S 0.6.json @@ -0,0 +1,51 @@ +{ + "type": "process", + "print_settings_id": "0.20mm Detail @MK3S 0.6", + "name": "0.20mm Detail @MK3S 0.6", + "from": "system", + "renamed_from":"0.20mm Standard @MK3S", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "4", + "bridge_acceleration": "1000", + "bridge_speed": "25", + "gap_infill_speed": "40", + "inner_wall_acceleration": "800", + "inner_wall_speed": "60", + "layer_height": "0.2", + "raft_contact_distance": "0.2", + "sparse_infill_acceleration": "1000", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_z_distance": "0.2", + "support_interface_speed": "40", + "support_object_xy_distance": "0.27", + "support_top_z_distance": "0.2", + "thick_bridges": "0", + "top_shell_layers": "5", + "bottom_shell_thickness": "0.6", + "bridge_flow": "1", + "elefant_foot_compensation": "0.2", + "infill_wall_overlap": "15%", + "initial_layer_infill_speed": "40", + "initial_layer_line_width": "0.65", + "inner_wall_line_width": "0.65", + "internal_solid_infill_line_width": "0.65", + "internal_solid_infill_speed": "70", + "is_custom_defined": "0", + "line_width": "0.65", + "outer_wall_line_width": "0.65", + "outer_wall_speed": "45", + "small_perimeter_speed": "35", + "sparse_infill_line_width": "0.65", + "sparse_infill_speed": "70", + "support_line_width": "0.55", + "support_speed": "40", + "top_shell_thickness": "0.9", + "top_surface_line_width": "0.6", + "top_surface_speed": "45", + "wall_loops": "2", + "compatible_printers": [ + "Prusa MK3S 0.6 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.20mm Speed @MK3S 0.4.json b/resources/profiles/Prusa/process/0.20mm Speed @MK3S 0.4.json new file mode 100644 index 0000000000..260abfd6ab --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm Speed @MK3S 0.4.json @@ -0,0 +1,44 @@ +{ + "type": "process", + "print_settings_id": "0.20mm Speed @MK3S 0.4", + "name": "0.20mm Speed @MK3S 0.4", + "from": "system", + "renamed_from":"0.20mm Standard @MK3S", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "4", + "bridge_acceleration": "1000", + "bridge_flow": "0.95", + "bridge_speed": "25", + "gap_infill_speed": "40", + "inner_wall_acceleration": "800", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "60", + "internal_solid_infill_line_width": "0.45", + "internal_solid_infill_speed": "200", + "layer_height": "0.2", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "outer_wall_speed": "35", + "raft_contact_distance": "0.2", + "small_perimeter_speed": "25", + "sparse_infill_acceleration": "1000", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "200", + "support_base_pattern_spacing": "2", + "support_bottom_z_distance": "0.2", + "support_interface_speed": "40", + "support_line_width": "0.35", + "support_object_xy_distance": "0.27", + "support_speed": "50", + "support_top_z_distance": "0.2", + "thick_bridges": "0", + "top_shell_layers": "5", + "top_surface_line_width": "0.4", + "top_surface_speed": "50", + "wall_loops": "2", + "compatible_printers": [ + "Prusa MK3S 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.20mm Standard @MK3S 0.4.json b/resources/profiles/Prusa/process/0.20mm Standard @MK3S 0.4.json new file mode 100644 index 0000000000..8ecb0645d1 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm Standard @MK3S 0.4.json @@ -0,0 +1,20 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @MK3S 0.4", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_common", + "initial_layer_speed": "20", + "initial_layer_infill_speed": "25", + "outer_wall_speed": "35", + "inner_wall_speed": "60", + "sparse_infill_speed": "200", + "internal_solid_infill_speed": "200", + "top_surface_speed": "50", + "gap_infill_speed": "40", + "travel_speed": "180", + "compatible_printers": [ + "Prusa MK3S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.30mm Detail @MK3S 0.8.json b/resources/profiles/Prusa/process/0.30mm Detail @MK3S 0.8.json new file mode 100644 index 0000000000..f558fda575 --- /dev/null +++ b/resources/profiles/Prusa/process/0.30mm Detail @MK3S 0.8.json @@ -0,0 +1,50 @@ +{ + "type": "process", + "print_settings_id": "0.30mm Detail @MK3S 0.8", + "name": "0.30mm Detail @MK3S 0.8", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "3", + "bridge_acceleration": "1000", + "bridge_speed": "25", + "inner_wall_acceleration": "800", + "layer_height": "0.3", + "raft_contact_distance": "0.2", + "sparse_infill_acceleration": "1000", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_z_distance": "0.2", + "support_interface_speed": "36", + "support_object_xy_distance": "0.36", + "support_top_z_distance": "0.2", + "thick_bridges": "0", + "top_shell_layers": "4", + "bottom_shell_thickness": "0.8", + "bridge_flow": "0.9", + "elefant_foot_compensation": "0.2", + "gap_infill_speed": "30", + "infill_wall_overlap": "15%", + "initial_layer_line_width": "0.9", + "initial_layer_print_height": "0.3", + "inner_wall_line_width": "0.9", + "inner_wall_speed": "35", + "internal_solid_infill_line_width": "0.9", + "internal_solid_infill_speed": "50", + "is_custom_defined": "0", + "line_width": "0.9", + "outer_wall_line_width": "0.9", + "outer_wall_speed": "25", + "small_perimeter_speed": "25", + "sparse_infill_line_width": "0.9", + "sparse_infill_speed": "50", + "support_line_width": "0.7", + "support_speed": "40", + "top_shell_thickness": "1.2", + "top_surface_line_width": "0.8", + "top_surface_speed": "35", + "wall_loops": "2", + "compatible_printers": [ + "Prusa MK3S 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.30mm Draft @MK3S 0.4.json b/resources/profiles/Prusa/process/0.30mm Draft @MK3S 0.4.json new file mode 100644 index 0000000000..0fa349f1d8 --- /dev/null +++ b/resources/profiles/Prusa/process/0.30mm Draft @MK3S 0.4.json @@ -0,0 +1,43 @@ +{ + "type": "process", + "print_settings_id": "0.30mm Draft @MK3S 0.4", + "name": "0.30mm Draft @MK3S 0.4", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "3", + "bridge_acceleration": "1000", + "bridge_flow": "0.95", + "bridge_speed": "25", + "gap_infill_speed": "40", + "inner_wall_acceleration": "800", + "inner_wall_line_width": "0.5", + "inner_wall_speed": "50", + "internal_solid_infill_line_width": "0.5", + "internal_solid_infill_speed": "80", + "layer_height": "0.3", + "line_width": "0.5", + "outer_wall_line_width": "0.6", + "outer_wall_speed": "35", + "raft_contact_distance": "0.2", + "small_perimeter_speed": "30", + "sparse_infill_acceleration": "1000", + "sparse_infill_line_width": "0.5", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "85", + "support_base_pattern_spacing": "2", + "support_bottom_z_distance": "0.2", + "support_interface_speed": "36", + "support_line_width": "0.38", + "support_object_xy_distance": "0.36", + "support_speed": "45", + "support_top_z_distance": "0.2", + "thick_bridges": "0", + "top_shell_layers": "4", + "top_surface_line_width": "0.45", + "top_surface_speed": "40", + "wall_loops": "2", + "compatible_printers": [ + "Prusa MK3S 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.30mm Quality @MK3S 0.6.json b/resources/profiles/Prusa/process/0.30mm Quality @MK3S 0.6.json new file mode 100644 index 0000000000..06cf70b799 --- /dev/null +++ b/resources/profiles/Prusa/process/0.30mm Quality @MK3S 0.6.json @@ -0,0 +1,49 @@ +{ + "type": "process", + "print_settings_id": "0.30mm Quality @MK3S 0.6", + "name": "0.30mm Quality @MK3S 0.6", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bridge_acceleration": "1000", + "bridge_speed": "25", + "gap_infill_speed": "40", + "inner_wall_acceleration": "800", + "inner_wall_speed": "50", + "layer_height": "0.3", + "outer_wall_speed": "35", + "raft_contact_distance": "0.2", + "small_perimeter_speed": "30", + "sparse_infill_acceleration": "1000", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_z_distance": "0.2", + "support_interface_speed": "36", + "support_object_xy_distance": "0.36", + "support_top_z_distance": "0.2", + "thick_bridges": "0", + "top_shell_layers": "4", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0.6", + "bridge_flow": "1", + "elefant_foot_compensation": "0.2", + "infill_wall_overlap": "15%", + "initial_layer_line_width": "0.65", + "inner_wall_line_width": "0.65", + "internal_solid_infill_line_width": "0.65", + "internal_solid_infill_speed": "70", + "is_custom_defined": "0", + "line_width": "0.65", + "outer_wall_line_width": "0.65", + "sparse_infill_line_width": "0.65", + "sparse_infill_speed": "70", + "support_line_width": "0.55", + "support_speed": "50", + "top_shell_thickness": "0.9", + "top_surface_line_width": "0.6", + "top_surface_speed": "45", + "wall_loops": "2", + "compatible_printers": [ + "Prusa MK3S 0.6 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.35mm Speed @MK3S 0.6.json b/resources/profiles/Prusa/process/0.35mm Speed @MK3S 0.6.json new file mode 100644 index 0000000000..c0a957c59c --- /dev/null +++ b/resources/profiles/Prusa/process/0.35mm Speed @MK3S 0.6.json @@ -0,0 +1,43 @@ +{ + "type": "process", + "print_settings_id": "0.35mm Speed @MK3S 0.6", + "name": "0.35mm Speed @MK3S 0.6", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "3", + "bridge_acceleration": "1000", + "bridge_flow": "0.95", + "bridge_speed": "25", + "gap_infill_speed": "40", + "inner_wall_acceleration": "800", + "inner_wall_line_width": "0.5", + "inner_wall_speed": "50", + "internal_solid_infill_line_width": "0.5", + "internal_solid_infill_speed": "80", + "layer_height": "0.3", + "line_width": "0.5", + "outer_wall_line_width": "0.6", + "outer_wall_speed": "35", + "raft_contact_distance": "0.2", + "small_perimeter_speed": "30", + "sparse_infill_acceleration": "1000", + "sparse_infill_line_width": "0.5", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "85", + "support_base_pattern_spacing": "2", + "support_bottom_z_distance": "0.2", + "support_interface_speed": "36", + "support_line_width": "0.38", + "support_object_xy_distance": "0.36", + "support_speed": "45", + "support_top_z_distance": "0.2", + "thick_bridges": "0", + "top_shell_layers": "4", + "top_surface_line_width": "0.45", + "top_surface_speed": "40", + "wall_loops": "2", + "compatible_printers": [ + "Prusa MK3S 0.6 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.40mm Draft @MK3S 0.6.json b/resources/profiles/Prusa/process/0.40mm Draft @MK3S 0.6.json new file mode 100644 index 0000000000..bcf8503188 --- /dev/null +++ b/resources/profiles/Prusa/process/0.40mm Draft @MK3S 0.6.json @@ -0,0 +1,49 @@ +{ + "type": "process", + "print_settings_id": "0.40mm Draft @MK3S 0.6", + "name": "0.40mm Draft @MK3S 0.6", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "3", + "bridge_acceleration": "1000", + "bridge_flow": "0.95", + "bridge_speed": "25", + "gap_infill_speed": "40", + "inner_wall_acceleration": "800", + "outer_wall_speed": "35", + "raft_contact_distance": "0.2", + "sparse_infill_acceleration": "1000", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_z_distance": "0.2", + "support_interface_speed": "36", + "support_object_xy_distance": "0.36", + "support_top_z_distance": "0.2", + "thick_bridges": "0", + "top_shell_layers": "4", + "bottom_shell_thickness": "0.6", + "elefant_foot_compensation": "0.2", + "infill_wall_overlap": "15%", + "initial_layer_line_width": "0.65", + "inner_wall_line_width": "0.68", + "inner_wall_speed": "45", + "internal_solid_infill_line_width": "0.68", + "internal_solid_infill_speed": "70", + "is_custom_defined": "0", + "layer_height": "0.4", + "line_width": "0.65", + "outer_wall_line_width": "0.68", + "small_perimeter_speed": "35", + "sparse_infill_line_width": "0.68", + "sparse_infill_speed": "70", + "support_line_width": "0.55", + "support_speed": "50", + "top_shell_thickness": "0.9", + "top_surface_line_width": "0.6", + "top_surface_speed": "45", + "wall_loops": "2", + "compatible_printers": [ + "Prusa MK3S 0.6 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.40mm Quality @MK3S 0.8.json b/resources/profiles/Prusa/process/0.40mm Quality @MK3S 0.8.json new file mode 100644 index 0000000000..d5ac1ff768 --- /dev/null +++ b/resources/profiles/Prusa/process/0.40mm Quality @MK3S 0.8.json @@ -0,0 +1,51 @@ +{ + "type": "process", + "print_settings_id": "0.40mm Quality @MK3S 0.8", + "name": "0.40mm Quality @MK3S 0.8", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "3", + "bridge_acceleration": "1000", + "bridge_speed": "25", + "inner_wall_acceleration": "800", + "outer_wall_line_width": "0.6", + "raft_contact_distance": "0.2", + "sparse_infill_acceleration": "1000", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_z_distance": "0.2", + "support_interface_speed": "36", + "support_object_xy_distance": "0.36", + "support_top_z_distance": "0.2", + "thick_bridges": "0", + "top_shell_layers": "4", + "bottom_shell_thickness": "0.8", + "bridge_flow": "0.9", + "elefant_foot_compensation": "0.2", + "gap_infill_speed": "30", + "infill_wall_overlap": "15%", + "initial_layer_infill_speed": "35", + "initial_layer_line_width": "0.9", + "initial_layer_print_height": "0.3", + "inner_wall_line_width": "0.9", + "inner_wall_speed": "35", + "internal_solid_infill_line_width": "0.9", + "internal_solid_infill_speed": "45", + "is_custom_defined": "0", + "layer_height": "0.4", + "line_width": "0.9", + "outer_wall_speed": "25", + "small_perimeter_speed": "25", + "sparse_infill_line_width": "0.9", + "sparse_infill_speed": "50", + "support_line_width": "0.7", + "support_speed": "40", + "top_shell_thickness": "1.2", + "top_surface_line_width": "0.8", + "top_surface_speed": "35", + "wall_loops": "2", + "compatible_printers": [ + "Prusa MK3S 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.55mm Draft @MK3S 0.8.json b/resources/profiles/Prusa/process/0.55mm Draft @MK3S 0.8.json new file mode 100644 index 0000000000..943bbbedd0 --- /dev/null +++ b/resources/profiles/Prusa/process/0.55mm Draft @MK3S 0.8.json @@ -0,0 +1,49 @@ +{ + "type": "process", + "print_settings_id": "0.55mm Draft @MK3S 0.8", + "name": "0.55mm Draft @MK3S 0.8", + "from": "system", + "instantiation": "true", + "inherits": "process_common_mk3", + "bottom_shell_layers": "3", + "bridge_acceleration": "1000", + "bridge_speed": "25", + "inner_wall_acceleration": "800", + "raft_contact_distance": "0.2", + "sparse_infill_acceleration": "1000", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_z_distance": "0.2", + "support_interface_speed": "36", + "support_object_xy_distance": "0.36", + "support_top_z_distance": "0.2", + "thick_bridges": "0", + "top_shell_layers": "4", + "bottom_shell_thickness": "0.8", + "bridge_flow": "0.9", + "elefant_foot_compensation": "0.2", + "gap_infill_speed": "30", + "initial_layer_line_width": "0.9", + "initial_layer_print_height": "0.3", + "inner_wall_line_width": "1", + "inner_wall_speed": "30", + "internal_solid_infill_line_width": "0.9", + "internal_solid_infill_speed": "50", + "is_custom_defined": "0", + "layer_height": "0.55", + "line_width": "0.9", + "outer_wall_line_width": "1", + "outer_wall_speed": "25", + "small_perimeter_speed": "25", + "sparse_infill_line_width": "0.9", + "sparse_infill_speed": "50", + "support_line_width": "0.7", + "support_speed": "35", + "top_shell_thickness": "1.2", + "top_surface_line_width": "0.8", + "top_surface_speed": "30", + "wall_loops": "2", + "compatible_printers": [ + "Prusa MK3S 0.8 nozzle" + ] +}