diff --git a/bbl/i18n/OrcaSlicer.pot b/bbl/i18n/OrcaSlicer.pot index ec6f677ae0..815c3d1c07 100644 --- a/bbl/i18n/OrcaSlicer.pot +++ b/bbl/i18n/OrcaSlicer.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-05-27 18:30+0800\n" +"POT-Creation-Date: 2023-05-30 05:30+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -18,18 +18,6 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" -msgid "Maximum speed of X axis" -msgstr "" - -msgid "Maximum speed of Y axis" -msgstr "" - -msgid "Maximum speed of Z axis" -msgstr "" - -msgid "Maximum speed of E axis" -msgstr "" - msgid "Supports Painting" msgstr "" @@ -4970,8 +4958,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "Line width" @@ -7097,10 +7085,10 @@ msgstr "" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/bbl/i18n/cs/OrcaSlicer_cs.po b/bbl/i18n/cs/OrcaSlicer_cs.po index 87c2c6ac5e..7151df9683 100755 --- a/bbl/i18n/cs/OrcaSlicer_cs.po +++ b/bbl/i18n/cs/OrcaSlicer_cs.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-05-27 18:30+0800\n" +"POT-Creation-Date: 2023-05-30 05:30+0200\n" "PO-Revision-Date: 2023-03-31 22:48+0200\n" "Last-Translator: Momo \n" "Language-Team: \n" @@ -5254,8 +5254,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Při nahrávání timelapse bez nástrojové hlavy se doporučuje přidat " "\"Timelapse Wipe Tower\" \n" @@ -7624,10 +7624,10 @@ msgstr "Maximální otáčky ventilátoru ve vrstvě" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/bbl/i18n/de/OrcaSlicer_de.po b/bbl/i18n/de/OrcaSlicer_de.po index 25da170e9b..3c653caa8b 100644 --- a/bbl/i18n/de/OrcaSlicer_de.po +++ b/bbl/i18n/de/OrcaSlicer_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-05-27 18:30+0800\n" +"POT-Creation-Date: 2023-05-30 05:30+0200\n" "PO-Revision-Date: \n" "Last-Translator: Heiko Liebscher \n" "Language-Team: \n" @@ -841,7 +841,7 @@ msgid "Load..." msgstr "Laden..." msgid "Orca Cube" -msgstr "" +msgstr "Orca Würfel" msgid "3DBenchy" msgstr "" @@ -850,7 +850,7 @@ msgid "Autodesk FDM Test" msgstr "" msgid "Voron Cube" -msgstr "" +msgstr "Voron Würfel" msgid "Cube" msgstr "Würfel" @@ -5421,13 +5421,13 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen " "\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste " -"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->" -"\"Timelapse Wischturm\" wählen." +"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-" +">\"Timelapse Wischturm\" wählen." msgid "Line width" msgstr "Breite der Linie" @@ -7729,7 +7729,7 @@ msgstr "" "Verbindet eine Infill-Linie mit einem kurzen Segment eines zusätzlichen " "Perimeters mit einem internen Perimeter. Wenn sie als Prozentsatz " "ausgedrückt wird (Beispiel: 15%), wird sie über die Breite der Infill-" -"Extrusion berechnet. PrusaSlicer versucht, zwei nahe beieinander liegende " +"Extrusion berechnet. OrcaSlicer versucht, zwei nahe beieinander liegende " "Infill-Linien mit einem kurzen Perimetersegment zu verbinden. Wenn kein " "solches Perimetersegment gefunden wird, das kürzer als infill_anchor_max " "ist, wird die Infill-Linie nur an einer Seite mit einem Perimetersegment " @@ -7739,13 +7739,13 @@ msgstr "" "deaktivieren, die mit einer einzelnen Infill-Linie verbunden sind." msgid "0 (no open anchors)" -msgstr "" +msgstr "0 (keine offenen Anker)" msgid "1000 (unlimited)" -msgstr "" +msgstr "1000 (unbegrenzt)" msgid "Maximum length of the infill anchor" -msgstr "" +msgstr "Maximale Länge des Infill-Ankers" msgid "" "Connect an infill line to an internal perimeter with a short segment of an " @@ -7761,7 +7761,7 @@ msgstr "" "Verbindet eine Infill-Linie mit einem kurzen Segment eines zusätzlichen " "Perimeters mit einem internen Perimeter. Wenn sie als Prozentsatz " "ausgedrückt wird (Beispiel: 15%), wird sie über die Breite der Infill-" -"Extrusion berechnet. PrusaSlicer versucht, zwei nahe beieinander liegende " +"Extrusion berechnet. OrcaSlicer versucht, zwei nahe beieinander liegende " "Infill-Linien mit einem kurzen Perimetersegment zu verbinden. Wenn kein " "solches Perimetersegment gefunden wird, das kürzer als dieser Parameter ist, " "wird die Infill-Linie nur an einer Seite mit einem Perimetersegment " @@ -7770,7 +7770,7 @@ msgstr "" "diesen Parameter auf Null, um die Verankerung zu deaktivieren." msgid "0 (Simple connect)" -msgstr "" +msgstr "0 (Einfache Verbindung)" msgid "Acceleration of outer walls" msgstr "Beschleunigung Außenwände" @@ -7917,13 +7917,13 @@ msgstr "Volle Lüfterdrehzahl ab Schicht" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" -"Die Lüftergeschwindigkeit wird linear von Null bei der Schicht" -"\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht " +"Die Lüftergeschwindigkeit wird linear von Null bei der " +"Schicht\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht " "\"full_fan_speed_layer\" erhöht. \"full_fan_speed_layer\" wird ignoriert, " "wenn es niedriger ist als \"close_fan_the_first_x_layers\",in diesem Fall " "läuft der Lüfter bei Schicht \"close_fan_the_first_x_layers\"+ 1 mit maximal " diff --git a/bbl/i18n/en/OrcaSlicer_en.po b/bbl/i18n/en/OrcaSlicer_en.po index f559b81b99..a9e51e731d 100644 --- a/bbl/i18n/en/OrcaSlicer_en.po +++ b/bbl/i18n/en/OrcaSlicer_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-05-27 18:30+0800\n" +"POT-Creation-Date: 2023-05-30 05:30+0200\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5087,13 +5087,13 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgid "Line width" msgstr "Line width" @@ -7372,10 +7372,10 @@ msgstr "Full fan speed at layer" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/bbl/i18n/es/OrcaSlicer_es.po b/bbl/i18n/es/OrcaSlicer_es.po index afd7af8591..de8bfb5859 100644 --- a/bbl/i18n/es/OrcaSlicer_es.po +++ b/bbl/i18n/es/OrcaSlicer_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-05-27 18:30+0800\n" +"POT-Creation-Date: 2023-05-30 05:30+0200\n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -5147,8 +5147,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "Line width" @@ -7465,10 +7465,10 @@ msgstr "Velocidad máxima del ventilador en la capa" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/bbl/i18n/fr/OrcaSlicer_fr.po b/bbl/i18n/fr/OrcaSlicer_fr.po index c607a82eb9..c5d95ecfd4 100644 --- a/bbl/i18n/fr/OrcaSlicer_fr.po +++ b/bbl/i18n/fr/OrcaSlicer_fr.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-05-27 18:30+0800\n" +"POT-Creation-Date: 2023-05-30 05:30+0200\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: Guislain Cyril\n" @@ -17,18 +17,6 @@ msgstr "" "Plural-Forms: nplurals=2; plural=(n==0 || n==1) ? 0 : 1;\n" "X-Generator: Poedit 3.3.1\n" -msgid "Maximum speed of X axis" -msgstr "Vitesse maximale de l'axe X" - -msgid "Maximum speed of Y axis" -msgstr "Vitesse maximale de l'axe Y" - -msgid "Maximum speed of Z axis" -msgstr "Vitesse maximale de l'axe Z" - -msgid "Maximum speed of E axis" -msgstr "Vitesse maximale de l'extrudeur" - msgid "Supports Painting" msgstr "Peindre les supports" @@ -7038,6 +7026,7 @@ msgstr "" msgid "Cooling overhang threshold" msgstr "Seuil de surplomb" +#, fuzzy, c-format msgid "" "Force cooling fan to be specific speed when overhang degree of printed part " "exceeds this value. Expressed as percentage which indicides how much width " @@ -7602,9 +7591,10 @@ msgstr "" msgid "Shrinkage" msgstr "Rétrécissement" +#, fuzzy, c-format, boost-format msgid "" -"Enter the shrinkage percentage that the filament will get after cooling (94% " -"if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"Enter the shrinkage percentage that the filament will get after cooling " +"(94% if you measure 94mm instead of 100mm). The part will be scaled in xy to " "compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done " "after the checks." @@ -7845,6 +7835,7 @@ msgstr "Le paramètre max_accel_to_decel de Klipper sera ajusté automatiquement msgid "accel_to_decel" msgstr "Ajuster l’accélération à la décélération" +#, fuzzy, c-format, boost-format msgid "Klipper's max_accel_to_decel will be adjusted to this % of acceleration" msgstr "" "Le paramètre max_accel_to_decel de Klipper sera ajusté à ce pourcentage " @@ -9512,6 +9503,7 @@ msgstr "" msgid "invalid value " msgstr "valeur invalide " +#, fuzzy, c-format, boost-format msgid " doesn't work at 100%% density " msgstr " ne fonctionne pas à 100% de densité " @@ -10225,3 +10217,15 @@ msgstr "" "Améliorer la résistance\n" "Saviez-vous que vous pouvez utiliser plus de parois et une densité de " "remplissage plus élevée pour améliorer la résistance du modèle ?" + +#~ msgid "Maximum speed of X axis" +#~ msgstr "Vitesse maximale de l'axe X" + +#~ msgid "Maximum speed of Y axis" +#~ msgstr "Vitesse maximale de l'axe Y" + +#~ msgid "Maximum speed of Z axis" +#~ msgstr "Vitesse maximale de l'axe Z" + +#~ msgid "Maximum speed of E axis" +#~ msgstr "Vitesse maximale de l'extrudeur" diff --git a/bbl/i18n/hu/OrcaSlicer_hu.po b/bbl/i18n/hu/OrcaSlicer_hu.po index 843ea0edbf..04a89f34b7 100644 --- a/bbl/i18n/hu/OrcaSlicer_hu.po +++ b/bbl/i18n/hu/OrcaSlicer_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-05-27 18:30+0800\n" +"POT-Creation-Date: 2023-05-30 05:30+0200\n" "Language: hu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -5124,8 +5124,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "Line width" @@ -7430,10 +7430,10 @@ msgstr "Teljes ventilátor fordulatszám ennél a rétegnél" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/bbl/i18n/it/OrcaSlicer_it.po b/bbl/i18n/it/OrcaSlicer_it.po index 55ea91f5c5..55fc2d0704 100644 --- a/bbl/i18n/it/OrcaSlicer_it.po +++ b/bbl/i18n/it/OrcaSlicer_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-05-27 18:30+0800\n" +"POT-Creation-Date: 2023-05-30 05:30+0200\n" "Language: it\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -5086,8 +5086,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "Line width" @@ -5962,8 +5962,8 @@ msgid "" msgstr "" "È stato rilevato un aggiornamento importante che deve essere eseguito prima " "che la stampa possa continuare. Si desidera aggiornare ora? È possibile " -"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware" -"\"." +"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna " +"firmware\"." msgid "" "The firmware version is abnormal. Repairing and updating are required before " @@ -7371,10 +7371,10 @@ msgstr "Massima velocità della ventola al layer" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" @@ -10000,8 +10000,8 @@ msgstr "" #~ "Quando si registra un timelapse senza testa di satmpa, si consiglia di " #~ "aggiungere un \"Timelapse Torre di pulizia\"\n" #~ "facendo clic con il pulsante destro del mouse sulla posizione vuota del " -#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia" -#~ "\"».\n" +#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di " +#~ "pulizia\"».\n" #~ msgid "" #~ "When sparse infill density is low, the internal solid infill or internal " diff --git a/bbl/i18n/ja/OrcaSlicer_ja.po b/bbl/i18n/ja/OrcaSlicer_ja.po index 99bc60077a..4a45f17519 100644 --- a/bbl/i18n/ja/OrcaSlicer_ja.po +++ b/bbl/i18n/ja/OrcaSlicer_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-05-27 18:30+0800\n" +"POT-Creation-Date: 2023-05-30 05:30+0200\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -5097,8 +5097,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "ヘッド無しのタイムラプスビデオを録画する時に、「タイムラプスプライムタワー」" "を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム" @@ -7354,10 +7354,10 @@ msgstr "最大回転速度の積層" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/bbl/i18n/nl/OrcaSlicer_nl.po b/bbl/i18n/nl/OrcaSlicer_nl.po index 8ca58a5b2f..c64420c4c4 100644 --- a/bbl/i18n/nl/OrcaSlicer_nl.po +++ b/bbl/i18n/nl/OrcaSlicer_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-05-27 18:30+0800\n" +"POT-Creation-Date: 2023-05-30 05:30+0200\n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -5153,8 +5153,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "Line width" @@ -7476,10 +7476,10 @@ msgstr "Volledige snelheid op laag" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/bbl/i18n/sv/OrcaSlicer_sv.po b/bbl/i18n/sv/OrcaSlicer_sv.po index ccaef1e1ef..d049a3991d 100644 --- a/bbl/i18n/sv/OrcaSlicer_sv.po +++ b/bbl/i18n/sv/OrcaSlicer_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-05-27 18:30+0800\n" +"POT-Creation-Date: 2023-05-30 05:30+0200\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -5087,8 +5087,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "Line width" @@ -6746,9 +6746,9 @@ msgid "" "quality for needle and small details" msgstr "" "Aktivera detta val för att sänka utskifts hastigheten för att göra den sista " -"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets tröskel" -"\", detta så att lager kan kylas under en längre tid. Detta kan förbättra " -"kylnings kvaliteten för små detaljer" +"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets " +"tröskel\", detta så att lager kan kylas under en längre tid. Detta kan " +"förbättra kylnings kvaliteten för små detaljer" msgid "Normal printing" msgstr "Normal utskrift" @@ -7361,10 +7361,10 @@ msgstr "Full fläkthastighet vid lager" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/bbl/i18n/zh_cn/OrcaSlicer_zh_CN.po b/bbl/i18n/zh_cn/OrcaSlicer_zh_CN.po index f9283ae84e..332942e3a2 100644 --- a/bbl/i18n/zh_cn/OrcaSlicer_zh_CN.po +++ b/bbl/i18n/zh_cn/OrcaSlicer_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-05-27 18:30+0800\n" +"POT-Creation-Date: 2023-05-30 05:30+0200\n" "PO-Revision-Date: 2023-04-01 13:21+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -5059,8 +5059,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "Line width" @@ -7106,10 +7106,10 @@ msgid "" "single infill line." msgstr "" "用附加周长的一小段将填充线连接到内部周长。如果以百分比（例如：15%）表示，则计" -"算填充拉伸宽度。PrusaSlicer 试图将两条紧密的填充线连接到一个短的周长段。如果" -"找不到短于“填充”和“锚点”最大值的周长线段，则填充线仅在一侧连接到周长线段，并" -"且所取周长线段的长度仅限于此参数，但不超过“锚点长度”最大值。将此参数设置为" -"零，以禁用连接到单个填充线的锚点周长。" +"算填充拉伸宽度。OrcaSlicer 试图将两条紧密的填充线连接到一个短的周长段。如果找" +"不到短于“填充”和“锚点”最大值的周长线段，则填充线仅在一侧连接到周长线段，并且" +"所取周长线段的长度仅限于此参数，但不超过“锚点长度”最大值。将此参数设置为零，" +"以禁用连接到单个填充线的锚点周长。" msgid "0 (no open anchors)" msgstr "0 (无锚线)" @@ -7132,9 +7132,9 @@ msgid "" "create the same result as with 1000 & 0." msgstr "" "用附加周长的一小段将填充线连接到内部周长。如果以百分比（例如：15%）表示，则计" -"算填充拉伸宽度。PrusaSlicer 试图将两条紧密的填充线连接到一个短的周长段。如果" -"找不到比此参数短的周长线段，则填充线仅在一侧连接到周长线段，并且所采用的周长" -"线段的长度仅限于 infl_anchor，但不超过此参数。将此参数设置为零以禁用锚点。" +"算填充拉伸宽度。OrcaSlicer 试图将两条紧密的填充线连接到一个短的周长段。如果找" +"不到比此参数短的周长线段，则填充线仅在一侧连接到周长线段，并且所采用的周长线" +"段的长度仅限于 infl_anchor，但不超过此参数。将此参数设置为零以禁用锚点。" msgid "0 (Simple connect)" msgstr "" @@ -7256,10 +7256,10 @@ msgstr "满速风扇在" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" "风扇速度将从“禁用第一层”的零线性上升到“全风扇速度层”的最大。如果低于“禁用风扇" "第一层”，则“全风扇速度第一层”将被忽略，在这种情况下，风扇将在“禁用风扇第一" @@ -13103,8 +13103,8 @@ msgstr "" #~ msgstr "正在准备设置页" #~ msgid "" -#~ "You have the following presets with saved options for \"Print Host upload" -#~ "\"" +#~ "You have the following presets with saved options for \"Print Host " +#~ "upload\"" #~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”" #~ msgid "" diff --git a/resources/i18n/de/OrcaSlicer.mo b/resources/i18n/de/OrcaSlicer.mo index 5cc6695d8b..58a06b8931 100644 Binary files a/resources/i18n/de/OrcaSlicer.mo and b/resources/i18n/de/OrcaSlicer.mo differ diff --git a/resources/i18n/fr/OrcaSlicer.mo b/resources/i18n/fr/OrcaSlicer.mo index 759dae319b..a85a7ffcac 100644 Binary files a/resources/i18n/fr/OrcaSlicer.mo and b/resources/i18n/fr/OrcaSlicer.mo differ diff --git a/resources/i18n/zh_cn/OrcaSlicer.mo b/resources/i18n/zh_cn/OrcaSlicer.mo index b2fa253bad..34565e84cb 100644 Binary files a/resources/i18n/zh_cn/OrcaSlicer.mo and b/resources/i18n/zh_cn/OrcaSlicer.mo differ