diff --git a/resources/profiles/FlyingBear/filament/FlyingBear Generic ABS.json b/resources/profiles/FlyingBear/filament/FlyingBear Generic ABS.json
index 4cc0e64e39..06807e0b7e 100644
--- a/resources/profiles/FlyingBear/filament/FlyingBear Generic ABS.json	
+++ b/resources/profiles/FlyingBear/filament/FlyingBear Generic ABS.json	
@@ -7,10 +7,19 @@
     "instantiation": "true",
     "inherits": "fdm_filament_abs",
     "filament_flow_ratio": [
-        "0.931"
+        "0.94"
     ],
     "filament_max_volumetric_speed": [
-        "16"
+        "15"
+    ],
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "pressure_advance": [
+        "0.058"
+    ],
+    "filament_retraction_length": [
+        "0.8"
     ],
     "compatible_printers": [
       "FlyingBear Reborn3 0.4 nozzle"
diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_abs.json b/resources/profiles/FlyingBear/filament/fdm_filament_abs.json
index 97cbf02b1b..23952b651f 100644
--- a/resources/profiles/FlyingBear/filament/fdm_filament_abs.json
+++ b/resources/profiles/FlyingBear/filament/fdm_filament_abs.json
@@ -4,6 +4,9 @@
     "from": "system",
     "instantiation": "false",
     "inherits": "fdm_filament_common",
+    "filament_vendor": [
+        "FlyingBear"
+    ],
     "cool_plate_temp" : [
         "105"
     ],
@@ -14,7 +17,7 @@
         "105"
     ],
     "textured_plate_temp" : [
-        "100"
+        "105"
     ],
     "cool_plate_temp_initial_layer" : [
         "105"
@@ -23,7 +26,7 @@
         "105"
     ],
     "hot_plate_temp_initial_layer" : [
-        "100"
+        "105"
     ],
     "textured_plate_temp_initial_layer" : [
         "105"
@@ -37,9 +40,6 @@
     "fan_cooling_layer_time": [
         "30"
     ],
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
     "filament_type": [
         "ABS"
     ],
@@ -50,10 +50,10 @@
         "20"
     ],
     "nozzle_temperature_initial_layer": [
-        "250"
+        "230"
     ],
     "reduce_fan_stop_start_freq": [
-        "0"
+        "1"
     ],
     "fan_max_speed": [
         "20"
@@ -68,13 +68,13 @@
         "80"
     ],
     "nozzle_temperature": [
-        "250"
+        "230"
     ],
     "temperature_vitrification": [
         "110"
     ],
     "nozzle_temperature_range_low": [
-        "240"
+        "220"
     ],
     "nozzle_temperature_range_high": [
         "270"
@@ -82,7 +82,13 @@
     "slow_down_min_speed": [
         "20"
     ],
+    "activate_air_filtration": [
+        "1"
+    ],
+    "complete_print_exhaust_fan_speed": [
+        "60"
+    ],
     "slow_down_layer_time": [
-        "3"
+        "5"
     ]
 }
diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pa.json b/resources/profiles/FlyingBear/filament/fdm_filament_pa.json
index 1111001d65..cbfa23c100 100644
--- a/resources/profiles/FlyingBear/filament/fdm_filament_pa.json
+++ b/resources/profiles/FlyingBear/filament/fdm_filament_pa.json
@@ -8,10 +8,10 @@
         "0"
     ],
     "eng_plate_temp" : [
-        "100"
+        "110"
     ],
     "hot_plate_temp" : [
-        "100"
+        "110"
     ],
     "textured_plate_temp" : [
         "100"
diff --git a/resources/profiles/FlyingBear/machine/fdm_klipper_common.json b/resources/profiles/FlyingBear/machine/fdm_klipper_common.json
index 870c4ba2b1..b12c4516af 100644
--- a/resources/profiles/FlyingBear/machine/fdm_klipper_common.json
+++ b/resources/profiles/FlyingBear/machine/fdm_klipper_common.json
@@ -20,7 +20,7 @@
   ],
   "default_print_profile": "0.20mm Standard @FlyingBear Reborn3",
   "deretraction_speed": [
-      "40"
+      "30"
   ],
   "enable_filament_ramming": "1",
   "extra_loading_move": "-2",
@@ -44,75 +44,75 @@
   "machine_end_gcode": "PRINT_END",
   "machine_load_filament_time": "0",
   "machine_max_acceleration_e": [
-      "5000",
-      "5000"
-  ],
-  "machine_max_acceleration_extruding": [
-      "20000",
-      "20000"
-  ],
-  "machine_max_acceleration_retracting": [
-      "5000",
-      "5000"
-  ],
-  "machine_max_acceleration_travel": [
-      "9000",
-      "9000"
-  ],
-  "machine_max_acceleration_x": [
-      "20000",
-      "20000"
-  ],
-  "machine_max_acceleration_y": [
-      "20000",
-      "20000"
-  ],
-  "machine_max_acceleration_z": [
-      "30",
-      "200"
-  ],
-  "machine_max_jerk_e": [
-      "2.5",
-      "2.5"
-  ],
-  "machine_max_jerk_x": [
-      "9",
-      "9"
-  ],
-  "machine_max_jerk_y": [
-      "9",
-      "9"
-  ],
-  "machine_max_jerk_z": [
-      "2",
-      "0.4"
-  ],
-  "machine_max_speed_e": [
-      "15",
-      "25"
-  ],
-  "machine_max_speed_x": [
-      "600",
-      "200"
-  ],
-  "machine_max_speed_y": [
-      "600",
-      "200"
-  ],
-  "machine_max_speed_z": [
-      "5",
-      "12"
-  ],
-  "machine_min_extruding_rate": [
-      "0",
-      "0"
-  ],
-  "machine_min_travel_rate": [
-      "0",
-      "0"
-  ],
+    "5000",
+    "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+    ],
+    "machine_max_acceleration_travel": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500",
+        "200"
+    ],
+    "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "9",
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "9",
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "3",
+        "0.4"
+    ],
+    "machine_max_speed_e": [
+        "30",
+        "25"
+    ],
+    "machine_max_speed_x": [
+        "600",
+        "200"
+    ],
+    "machine_max_speed_y": [
+        "600",
+        "200"
+    ],
+    "machine_max_speed_z": [
+        "20",
+        "12"
+    ],
+    "machine_min_extruding_rate": [
+        "0",
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0",
+        "0"
+    ],
   "machine_pause_gcode": "PAUSE",
-"machine_start_gcode": "M140 S40\nG28\nG4 P200\nG90\nG1 Z4\nZ_TILT_ADJUST\nM140 [bed_temperature_initial_layer_single] \nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-3 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",  "machine_unload_filament_time": "0",
+  "machine_start_gcode": ";V1.0\n\nM140 S[bed_temperature_initial_layer_single] \nG28\nG4 P200\nG90\nG1 Z4\nZ_TILT_ADJUST\nM140 S[bed_temperature_initial_layer_single] \nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-3 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",
   "max_layer_height": [
       "0.28"
   ],
@@ -150,61 +150,61 @@
   "printhost_user": "",
   "purge_in_prime_tower": "1",
   "retract_before_wipe": [
-      "0%"
-  ],
-  "retract_length_toolchange": [
-      "0"
-  ],
-  "retract_lift_above": [
-      "0"
-  ],
-  "retract_lift_below": [
-      "0"
-  ],
-  "retract_lift_enforce": [
-      "All Surfaces"
-  ],
-  "retract_restart_extra": [
-      "0"
-  ],
-  "retract_restart_extra_toolchange": [
-      "0"
-  ],
-  "retract_when_changing_layer": [
-      "0"
-  ],
-  "retraction_length": [
-      "0.5"
-  ],
-  "retraction_minimum_travel": [
-      "1"
-  ],
-  "retraction_speed": [
-      "40"
-  ],
-  "scan_first_layer": "0",
-  "silent_mode": "0",
-  "single_extruder_multi_material": "1",
-  "template_custom_gcode": "",
-  "thumbnails": [
-      "300x300"
-  ],
-  "upward_compatible_machine": [],
-  "use_firmware_retraction": "0",
-  "use_relative_e_distances": "1",
-  "version": "1.6.0.0",
-  "wipe": [
-      "1"
-  ],
-  "wipe_distance": [
-      "2"
-  ],
-  "z_hop": [
-      "0"
-  ],
-  "z_hop_types": [
-      "Normal Lift"
-  ]
+        "0%"
+    ],
+    "retract_length_toolchange": [
+        "0"
+    ],
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "349"
+    ],
+    "retract_lift_enforce": [
+        "All Surfaces"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "0.5"
+    ],
+    "retraction_minimum_travel": [
+        "1"
+    ],
+    "retraction_speed": [
+        "30"
+    ],
+    "scan_first_layer": "0",
+    "silent_mode": "0",
+    "single_extruder_multi_material": "1",
+    "template_custom_gcode": "",
+    "thumbnails": [
+        "300x300"
+    ],
+    "upward_compatible_machine": [],
+    "use_firmware_retraction": "0",
+    "use_relative_e_distances": "1",
+    "version": "1.6.0.0",
+    "wipe": [
+        "1"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "z_hop": [
+        "0.4"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
+    ]
 
   
 }