diff --git a/resources/profiles/Elegoo/machine/Elegoo OrangeStorm Giga 0.4 nozzle.json b/resources/profiles/Elegoo/machine/Elegoo OrangeStorm Giga 0.4 nozzle.json
index 7f2d4992ba..a26f8642d9 100644
--- a/resources/profiles/Elegoo/machine/Elegoo OrangeStorm Giga 0.4 nozzle.json	
+++ b/resources/profiles/Elegoo/machine/Elegoo OrangeStorm Giga 0.4 nozzle.json	
@@ -16,17 +16,20 @@
       "810x805",
       "0x805"
     ],
-    "printable_height": "1010",
+    "printable_height": [
+        "1010"
+    ],
     "retract_lift_below": [
         "1010"
     ],
-    "printer_variant": "0.4",
+    "printer_variant": [
+        "0.4"
+    ],
     "auxiliary_fan": "0",
     "bed_exclude_area": [],
     "default_filament_profile": [
         "Elegoo PLA @Elegoo Giga"
     ],
-    "head_wrap_detect_zone": [],
     "machine_load_filament_time": "25",
     "machine_max_acceleration_extruding": [
         "5000",
@@ -86,7 +89,7 @@
     "gcode_flavor": "klipper",
     "change_filament_gcode": "M600",
     "machine_pause_gcode": "PAUSE",
-    "machine_start_gcode": ";;===== date: 20240520 =====================\n;Machine_use_extruders:1\n;TIME:\nM400 ; wait for buffer to clear\n;[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type={curr_bed_type}\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\n;Giga zoned hot bed control\n;Case 1\nM140 S0\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T0 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T1 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405 && ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 2\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 3\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T1 S[bed_temperature_initial_layer_single]\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 4\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\nG90\nG28 ;home\nG1 Z10 F300\nG1 X{print_bed_max[0]*0.75-50} Y0.5 F6000\n;\n;Giga zoned hot bed control\n;Case 1\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM190 T0 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM190 T1 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((first_layer_print_max[1])) > 402.5}\nM190 T3 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405 && ((first_layer_print_max[1])) > 402.5}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 2\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM190 T3 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 3\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM190 T1 S[bed_temperature_initial_layer_single]\n{if ((first_layer_print_max[1])) > 402.5}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 4\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\nG1 Z0.4 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X{print_bed_max[0]*0.75+50} E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X{print_bed_max[0]*0.75+47} F3000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0\n",
+    "machine_start_gcode": ";;===== date: 20240520 =====================\n;Machine_use_extruders:1\n;TIME:\nM400 ; wait for buffer to clear\n;[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type={curr_bed_type}\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\n;Giga zoned hot bed control\n;Case 1\nM140 S0\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T0 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T1 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405 && ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 2\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 3\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T1 S[bed_temperature_initial_layer_single]\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 4\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\nG90\nG28 ;home\nG1 Z10 F300\nG1 X{print_bed_max[0]*0.75-50} Y0.5 F6000\n;\n;Giga zoned hot bed control\n;Case 1\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM190 T0 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM190 T1 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((first_layer_print_max[1])) > 402.5}\nM190 T3 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405 && ((first_layer_print_max[1])) > 402.5}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 2\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM190 T3 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 3\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM190 T1 S[bed_temperature_initial_layer_single]\n{if ((first_layer_print_max[1])) > 402.5}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 4\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\nG1 Z0.4 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X{print_bed_max[0]*0.75+50} E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X{print_bed_max[0]*0.75+47} F3000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
     "machine_end_gcode": ";PRINT_END\nG90 ;Absolute positionning\nM83 ; extruder relative mode\nG1 X30 Y30 Z{min(max_layer_z+200, printable_height)} E-5 F{travel_speed*60} ; Move print head up\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
     "layer_change_gcode": ";LAYER:{layer_num+1}\n{if layer_num > 0 and layer_num < 3}\n;Giga zoned hot bed control\n;Case 1\nM140 S0\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T0 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T1 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405 && ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 2\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 3\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T1 S[bed_temperature_initial_layer_single]\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 4\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n\n{endif}"
 }
\ No newline at end of file