diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot
index 4ab1e7841a..d16ce63f79 100644
--- a/bbl/i18n/BambuStudio.pot
+++ b/bbl/i18n/BambuStudio.pot
@@ -8740,7 +8740,7 @@ msgstr ""
 msgid "Connecting to printer..."
 msgstr ""
 
-msgid "The failed test result has been droped."
+msgid "The failed test result has been dropped."
 msgstr ""
 
 msgid "Flow Dynamics Calibration result has been saved to the printer"
@@ -8867,7 +8867,7 @@ msgstr ""
 
 msgid ""
 "Part of the calibration failed! You may clean the plate and retry. The "
-"failed test result would be droped."
+"failed test result would be dropped."
 msgstr ""
 
 msgid ""
@@ -9260,103 +9260,103 @@ msgstr ""
 
 msgid "Delete input"
 msgstr ""
-
-#: resources/data/hints.ini: [hint:3D Scene Operations]
-msgid "3D Scene Operations\nDid you know how to control view and object/part selection with mouse and touchpanel in the 3D scene?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Cut Tool]
-msgid "Cut Tool\nDid you know that you can cut a model at any angle and position with the cutting tool?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Fix Model]
-msgid "Fix Model\nDid you know that you can fix a corrupted 3D model to avoid a lot of slicing problems?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Timelapse]
-msgid "Timelapse\nDid you know that you can generate a timelapse video during each print?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Auto-Arrange]
-msgid "Auto-Arrange\nDid you know that you can auto-arrange all objects in your project?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Auto-Orient]
-msgid "Auto-Orient\nDid you know that you can rotate objects to an optimal orientation for printing by a simple click?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Lay on Face]
-msgid "Lay on Face\nDid you know that you can quickly orient a model so that one of its faces sits on the print bed? Select the \"Place on face\" function or press the <b>F</b> key."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Object List]
-msgid "Object List\nDid you know that you can view all objects/parts in a list and change settings for each object/part?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Simplify Model]
-msgid "Simplify Model\nDid you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model. Read more in the documentation."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Slicing Parameter Table]
-msgid "Slicing Parameter Table\nDid you know that you can view all objects/parts on a table and change settings for each object/part?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Split to Objects/Parts]
-msgid "Split to Objects/Parts\nDid you know that you can split a big object into small ones for easy colorizing or printing?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Subtract a Part]
-msgid "Subtract a Part\nDid you know that you can subtract one mesh from another using the Negative part modifier? That way you can, for example, create easily resizable holes directly in Bambu Studio. Read more in the documentation."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:STEP]
-msgid "STEP\nDid you know that you can improve your print quality by slicing a STEP file instead of an STL?\nBambu Studio supports slicing STEP files, providing smoother results than a lower resolution STL. Give it a try!"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Z seam location]
-msgid "Z seam location\nDid you know that you can customize the location of the Z seam, and even paint it on your print, to have it in a less visible location? This improves the overall look of your model. Check it out!"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Fine-tuning for flow rate]
-msgid "Fine-tuning for flow rate\nDid you know that flow rate can be fine-tuned for even better-looking prints? Depending on the material, you can improve the overall finish of the printed model by doing some fine-tuning."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Split your prints into plates]
-msgid "Split your prints into plates\nDid you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer Height]
-msgid "Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster, by using the Adaptive Layer Height option? Check it out!"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Support painting]
-msgid "Support painting\nDid you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Different types of supports]
-msgid "Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models, while saving filament and improving print speed. Check them out!"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Printing Silk Filament]
-msgid "Printing Silk Filament\nDid you know that Silk filament needs special consideration to print it successfully? Higher temperature and lower speed are always recommended for the best results."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Brim for better adhesion]
-msgid "Brim for better adhesion\nDid you know that when printing models have a small contact interface with the printing surface, it's recommended to use a brim?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Set parameters for multiple objects]
-msgid "Set parameters for multiple objects\nDid you know that you can set slicing parameters for all selected objects at one time?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Stack objects]
-msgid "Stack objects\nDid you know that you can stack objects as a whole one?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Flush into support/objects/infill]
-msgid "Flush into support/objects/infill\nDid you know that you can save the wasted filament by flushing them into support/objects/infill during filament change?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Improve strength]
-msgid "Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?"
-msgstr ""
+
+#: resources/data/hints.ini: [hint:3D Scene Operations]
+msgid "3D Scene Operations\nDid you know how to control view and object/part selection with mouse and touchpanel in the 3D scene?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Cut Tool]
+msgid "Cut Tool\nDid you know that you can cut a model at any angle and position with the cutting tool?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Fix Model]
+msgid "Fix Model\nDid you know that you can fix a corrupted 3D model to avoid a lot of slicing problems?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Timelapse]
+msgid "Timelapse\nDid you know that you can generate a timelapse video during each print?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Auto-Arrange]
+msgid "Auto-Arrange\nDid you know that you can auto-arrange all objects in your project?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Auto-Orient]
+msgid "Auto-Orient\nDid you know that you can rotate objects to an optimal orientation for printing by a simple click?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Lay on Face]
+msgid "Lay on Face\nDid you know that you can quickly orient a model so that one of its faces sits on the print bed? Select the \"Place on face\" function or press the <b>F</b> key."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Object List]
+msgid "Object List\nDid you know that you can view all objects/parts in a list and change settings for each object/part?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Simplify Model]
+msgid "Simplify Model\nDid you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model. Read more in the documentation."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Slicing Parameter Table]
+msgid "Slicing Parameter Table\nDid you know that you can view all objects/parts on a table and change settings for each object/part?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Split to Objects/Parts]
+msgid "Split to Objects/Parts\nDid you know that you can split a big object into small ones for easy colorizing or printing?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Subtract a Part]
+msgid "Subtract a Part\nDid you know that you can subtract one mesh from another using the Negative part modifier? That way you can, for example, create easily resizable holes directly in Bambu Studio. Read more in the documentation."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:STEP]
+msgid "STEP\nDid you know that you can improve your print quality by slicing a STEP file instead of an STL?\nBambu Studio supports slicing STEP files, providing smoother results than a lower resolution STL. Give it a try!"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Z seam location]
+msgid "Z seam location\nDid you know that you can customize the location of the Z seam, and even paint it on your print, to have it in a less visible location? This improves the overall look of your model. Check it out!"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Fine-tuning for flow rate]
+msgid "Fine-tuning for flow rate\nDid you know that flow rate can be fine-tuned for even better-looking prints? Depending on the material, you can improve the overall finish of the printed model by doing some fine-tuning."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Split your prints into plates]
+msgid "Split your prints into plates\nDid you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer Height]
+msgid "Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster, by using the Adaptive Layer Height option? Check it out!"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Support painting]
+msgid "Support painting\nDid you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Different types of supports]
+msgid "Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models, while saving filament and improving print speed. Check them out!"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Printing Silk Filament]
+msgid "Printing Silk Filament\nDid you know that Silk filament needs special consideration to print it successfully? Higher temperature and lower speed are always recommended for the best results."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Brim for better adhesion]
+msgid "Brim for better adhesion\nDid you know that when printing models have a small contact interface with the printing surface, it's recommended to use a brim?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Set parameters for multiple objects]
+msgid "Set parameters for multiple objects\nDid you know that you can set slicing parameters for all selected objects at one time?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Stack objects]
+msgid "Stack objects\nDid you know that you can stack objects as a whole one?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Flush into support/objects/infill]
+msgid "Flush into support/objects/infill\nDid you know that you can save the wasted filament by flushing them into support/objects/infill during filament change?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Improve strength]
+msgid "Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?"
+msgstr ""
diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po
index 6d0f660033..f3de094728 100644
--- a/bbl/i18n/de/BambuStudio_de.po
+++ b/bbl/i18n/de/BambuStudio_de.po
@@ -9775,7 +9775,7 @@ msgstr ""
 msgid "Connecting to printer..."
 msgstr ""
 
-msgid "The failed test result has been droped."
+msgid "The failed test result has been dropped."
 msgstr ""
 
 msgid "Flow Dynamics Calibration result has been saved to the printer"
@@ -9902,7 +9902,7 @@ msgstr ""
 
 msgid ""
 "Part of the calibration failed! You may clean the plate and retry. The "
-"failed test result would be droped."
+"failed test result would be dropped."
 msgstr ""
 
 msgid ""
diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po
index ea1d08fb62..482d212b6e 100644
--- a/bbl/i18n/en/BambuStudio_en.po
+++ b/bbl/i18n/en/BambuStudio_en.po
@@ -9519,7 +9519,7 @@ msgstr ""
 msgid "Connecting to printer..."
 msgstr ""
 
-msgid "The failed test result has been droped."
+msgid "The failed test result has been dropped."
 msgstr ""
 
 msgid "Flow Dynamics Calibration result has been saved to the printer"
@@ -9646,7 +9646,7 @@ msgstr ""
 
 msgid ""
 "Part of the calibration failed! You may clean the plate and retry. The "
-"failed test result would be droped."
+"failed test result would be dropped."
 msgstr ""
 
 msgid ""
diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po
index 778273e1c6..76a5214d3f 100644
--- a/bbl/i18n/es/BambuStudio_es.po
+++ b/bbl/i18n/es/BambuStudio_es.po
@@ -9707,7 +9707,7 @@ msgstr ""
 msgid "Connecting to printer..."
 msgstr ""
 
-msgid "The failed test result has been droped."
+msgid "The failed test result has been dropped."
 msgstr ""
 
 msgid "Flow Dynamics Calibration result has been saved to the printer"
@@ -9834,7 +9834,7 @@ msgstr ""
 
 msgid ""
 "Part of the calibration failed! You may clean the plate and retry. The "
-"failed test result would be droped."
+"failed test result would be dropped."
 msgstr ""
 
 msgid ""
diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po
index c915c2a193..a4b8579941 100644
--- a/bbl/i18n/fr/BambuStudio_fr.po
+++ b/bbl/i18n/fr/BambuStudio_fr.po
@@ -9783,7 +9783,7 @@ msgstr ""
 msgid "Connecting to printer..."
 msgstr ""
 
-msgid "The failed test result has been droped."
+msgid "The failed test result has been dropped."
 msgstr ""
 
 msgid "Flow Dynamics Calibration result has been saved to the printer"
@@ -9910,7 +9910,7 @@ msgstr ""
 
 msgid ""
 "Part of the calibration failed! You may clean the plate and retry. The "
-"failed test result would be droped."
+"failed test result would be dropped."
 msgstr ""
 
 msgid ""
diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po
index 654ba4ee09..c5ba0a8195 100644
--- a/bbl/i18n/hu/BambuStudio_hu.po
+++ b/bbl/i18n/hu/BambuStudio_hu.po
@@ -9636,7 +9636,7 @@ msgstr ""
 msgid "Connecting to printer..."
 msgstr ""
 
-msgid "The failed test result has been droped."
+msgid "The failed test result has been dropped."
 msgstr ""
 
 msgid "Flow Dynamics Calibration result has been saved to the printer"
@@ -9763,7 +9763,7 @@ msgstr ""
 
 msgid ""
 "Part of the calibration failed! You may clean the plate and retry. The "
-"failed test result would be droped."
+"failed test result would be dropped."
 msgstr ""
 
 msgid ""
diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po
index f94e6a1211..7414196d1e 100644
--- a/bbl/i18n/it/BambuStudio_it.po
+++ b/bbl/i18n/it/BambuStudio_it.po
@@ -9708,7 +9708,7 @@ msgstr ""
 msgid "Connecting to printer..."
 msgstr ""
 
-msgid "The failed test result has been droped."
+msgid "The failed test result has been dropped."
 msgstr ""
 
 msgid "Flow Dynamics Calibration result has been saved to the printer"
@@ -9835,7 +9835,7 @@ msgstr ""
 
 msgid ""
 "Part of the calibration failed! You may clean the plate and retry. The "
-"failed test result would be droped."
+"failed test result would be dropped."
 msgstr ""
 
 msgid ""
diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po
index f9436e1451..ab6315fd35 100644
--- a/bbl/i18n/ja/BambuStudio_ja.po
+++ b/bbl/i18n/ja/BambuStudio_ja.po
@@ -9224,7 +9224,7 @@ msgstr ""
 msgid "Connecting to printer..."
 msgstr ""
 
-msgid "The failed test result has been droped."
+msgid "The failed test result has been dropped."
 msgstr ""
 
 msgid "Flow Dynamics Calibration result has been saved to the printer"
@@ -9351,7 +9351,7 @@ msgstr ""
 
 msgid ""
 "Part of the calibration failed! You may clean the plate and retry. The "
-"failed test result would be droped."
+"failed test result would be dropped."
 msgstr ""
 
 msgid ""
diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po
index dfa1d85efd..ddf0ae5044 100644
--- a/bbl/i18n/ko/BambuStudio_ko.po
+++ b/bbl/i18n/ko/BambuStudio_ko.po
@@ -9363,7 +9363,7 @@ msgstr ""
 msgid "Connecting to printer..."
 msgstr ""
 
-msgid "The failed test result has been droped."
+msgid "The failed test result has been dropped."
 msgstr ""
 
 msgid "Flow Dynamics Calibration result has been saved to the printer"
@@ -9490,7 +9490,7 @@ msgstr ""
 
 msgid ""
 "Part of the calibration failed! You may clean the plate and retry. The "
-"failed test result would be droped."
+"failed test result would be dropped."
 msgstr ""
 
 msgid ""
diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po
index 342a39035d..433f8dbe0c 100644
--- a/bbl/i18n/nl/BambuStudio_nl.po
+++ b/bbl/i18n/nl/BambuStudio_nl.po
@@ -9729,7 +9729,7 @@ msgstr ""
 msgid "Connecting to printer..."
 msgstr ""
 
-msgid "The failed test result has been droped."
+msgid "The failed test result has been dropped."
 msgstr ""
 
 msgid "Flow Dynamics Calibration result has been saved to the printer"
@@ -9856,7 +9856,7 @@ msgstr ""
 
 msgid ""
 "Part of the calibration failed! You may clean the plate and retry. The "
-"failed test result would be droped."
+"failed test result would be dropped."
 msgstr ""
 
 msgid ""
diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po
index 35e27e1286..cfeeac210f 100644
--- a/bbl/i18n/sv/BambuStudio_sv.po
+++ b/bbl/i18n/sv/BambuStudio_sv.po
@@ -9543,7 +9543,7 @@ msgstr ""
 msgid "Connecting to printer..."
 msgstr ""
 
-msgid "The failed test result has been droped."
+msgid "The failed test result has been dropped."
 msgstr ""
 
 msgid "Flow Dynamics Calibration result has been saved to the printer"
@@ -9670,7 +9670,7 @@ msgstr ""
 
 msgid ""
 "Part of the calibration failed! You may clean the plate and retry. The "
-"failed test result would be droped."
+"failed test result would be dropped."
 msgstr ""
 
 msgid ""
diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
index 94d1598d5d..8ab394fe62 100644
--- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
+++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
@@ -9076,7 +9076,7 @@ msgstr "请选择要校准的耗材丝。"
 msgid "Connecting to printer..."
 msgstr "正在连接打印机..."
 
-msgid "The failed test result has been droped."
+msgid "The failed test result has been dropped."
 msgstr "测试失败的结果已被删除。"
 
 msgid "Flow Dynamics Calibration result has been saved to the printer"
diff --git a/src/slic3r/GUI/CalibrationWizard.cpp b/src/slic3r/GUI/CalibrationWizard.cpp
index d8a12ae496..3171e4b471 100644
--- a/src/slic3r/GUI/CalibrationWizard.cpp
+++ b/src/slic3r/GUI/CalibrationWizard.cpp
@@ -587,7 +587,7 @@ void PressureAdvanceWizard::on_cali_save()
                     return;
                 }
                 if (save_page->is_all_failed()) {
-                    MessageDialog msg_dlg(nullptr, _L("The failed test result has been droped."), wxEmptyString, wxOK);
+                    MessageDialog msg_dlg(nullptr, _L("The failed test result has been dropped."), wxEmptyString, wxOK);
                     msg_dlg.ShowModal();
                     show_step(start_step);
                     return;
@@ -945,7 +945,7 @@ void FlowRateWizard::on_cali_save()
                 return;
             }
             if (save_page->is_all_failed()) {
-                MessageDialog msg_dlg(nullptr, _L("The failed test result has been droped."), wxEmptyString, wxOK);
+                MessageDialog msg_dlg(nullptr, _L("The failed test result has been dropped."), wxEmptyString, wxOK);
                 msg_dlg.ShowModal();
                 show_step(start_step);
                 return;
diff --git a/src/slic3r/GUI/CalibrationWizardSavePage.cpp b/src/slic3r/GUI/CalibrationWizardSavePage.cpp
index 8c80d9c4bf..48831693fb 100644
--- a/src/slic3r/GUI/CalibrationWizardSavePage.cpp
+++ b/src/slic3r/GUI/CalibrationWizardSavePage.cpp
@@ -148,7 +148,7 @@ void CaliPASaveAutoPanel::create_panel(wxWindow* parent)
     wxBoxSizer* part_failed_sizer = new wxBoxSizer(wxVERTICAL);
     m_part_failed_panel->SetSizer(part_failed_sizer);
     part_failed_sizer->AddSpacer(FromDIP(10));
-    auto part_failed_text = new Label(m_part_failed_panel, _L("Part of the calibration failed! You may clean the plate and retry. The failed test result would be droped."));
+    auto part_failed_text = new Label(m_part_failed_panel, _L("Part of the calibration failed! You may clean the plate and retry. The failed test result would be dropped."));
     part_failed_text->SetFont(Label::Body_14);
     part_failed_sizer->Add(part_failed_text, 0, wxLEFT | wxRIGHT, FromDIP(20));
     part_failed_sizer->AddSpacer(FromDIP(10));
@@ -910,7 +910,7 @@ void CalibrationFlowX1SavePage::create_page(wxWindow* parent)
     wxBoxSizer* part_failed_sizer = new wxBoxSizer(wxVERTICAL);
     m_part_failed_panel->SetSizer(part_failed_sizer);
     part_failed_sizer->AddSpacer(FromDIP(10));
-    auto part_failed_text = new Label(m_part_failed_panel, _L("Part of the calibration failed! You may clean the plate and retry. The failed test result would be droped."));
+    auto part_failed_text = new Label(m_part_failed_panel, _L("Part of the calibration failed! You may clean the plate and retry. The failed test result would be dropped."));
     part_failed_text->SetFont(Label::Body_14);
     part_failed_sizer->Add(part_failed_text, 0, wxLEFT | wxRIGHT, FromDIP(20));
     part_failed_sizer->AddSpacer(FromDIP(10));