From 464594336012defbea3c497a33ef3904fd5424b2 Mon Sep 17 00:00:00 2001 From: Hukete <100949318+Hukete@users.noreply.github.com> Date: Fri, 10 Nov 2023 20:51:44 +0800 Subject: [PATCH] Update fdm_process_qidi_x3_common.json (#2683) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * 10-25 Add TPU-95A HF * 1030 Adding Introduction of Chamber Temperature Control Macros(M191) to Notes * 1102 Add ABS-GF10 profileļ¼Œ Remove a extra "s" from the "0.36mm Standard @Qidi XPlus3 0.6 nozzle.json" file * 1106 Add the PA value to some genetic filament profiles * Update fdm_filament_pla.json Change the fan rate of begin layers * Update fdm_process_qidi_x3_common.json Reduction of top surface particles --- resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json | 1 + 1 file changed, 1 insertion(+) diff --git a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json index cd84825bc2..6f710334de 100644 --- a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json +++ b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json @@ -113,5 +113,6 @@ "internal_bridge_speed": "50", "internal_solid_infill_pattern": "monotonic", "initial_layer_travel_speed": "50%", + "filter_out_gap_fill": "2", "notes": "If you want to use Orca's chamber temperature control feature, check that printer.cfg has added the following M191 macro.\nTo add it: go to Fluidd web interface--configuration, copy the following code to the top of the printer.cfg document, SAVE&RESATART \n\n[gcode_macro M191]\ngcode:\n #Parameters\n {% set s = params.S|float %}\n \n M141 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set hotend temp\n {% if s != 0 %}\n TEMPERATURE_WAIT SENSOR=\"heater_generic hot\" MINIMUM={s} MAXIMUM={s+1} ; Wait for hotend temp (within 1 degree)\n {% endif %}" }