diff --git a/resources/profiles/Prusa.json b/resources/profiles/Prusa.json index bb0ca7890e..4cda8b1ef4 100644 --- a/resources/profiles/Prusa.json +++ b/resources/profiles/Prusa.json @@ -19,6 +19,10 @@ { "name": "MINI", "sub_path": "machine/Prusa MINI.json" + }, + { + "name": "Pursa XL Input Shaper", + "sub_path": "machine/Prusa XLIS.json" } ], "process_list": [ @@ -46,6 +50,10 @@ "name": "process_common_mk3", "sub_path": "process/process_common_mk3.json" }, + { + "name": "process_common_xl", + "sub_path": "process/process_common_xl.json" + }, { "name": "0.20mm Standard @MINI 0.25", "sub_path": "process/0.20mm Standard @MINI 0.25.json" @@ -151,137 +159,236 @@ "sub_path": "process/0.12mm Standard @MK4.json" }, { - "name": "0.16mm Standard @MK4", "sub_path": "process/0.16mm Standard @MK4.json" }, { - "name": "0.20mm Standard @MK4", "sub_path": "process/0.20mm Standard @MK4.json" }, { - "name": "0.05mm Detail @MINIIS", "sub_path": "process/0.05mm Detail @MINIIS.json" }, { - "name": "0.07mm Detail @MINIIS", "sub_path": "process/0.07mm Detail @MINIIS.json" }, { - "name": "0.10mm Speed @MINIIS", "sub_path": "process/0.10mm Speed @MINIIS.json" }, { - "name": "0.12mm Speed @MINIIS", "sub_path": "process/0.12mm Speed @MINIIS.json" }, { - "name": "0.12mm Standard @MINIIS", "sub_path": "process/0.12mm Standard @MINIIS.json" }, { - "name": "0.15mm Standard @MINIIS", "sub_path": "process/0.15mm Standard @MINIIS.json" }, { - "name": "0.15mm Standard @MINIIS 0.6", "sub_path": "process/0.15mm Standard @MINIIS 0.6.json" }, { - "name": "0.15mm Standard @MINIIS 0.25", "sub_path": "process/0.15mm Standard @MINIIS 0.25.json" }, - { - "name": "0.15mm Speed @MINIIS", "sub_path": "process/0.15mm Speed @MINIIS.json" }, { - "name": "0.15mm Speed @MINIIS 0.25", "sub_path": "process/0.15mm Speed @MINIIS 0.25.json" }, { - "name": "0.20mm Standard @MINIIS", "sub_path": "process/0.20mm Standard @MINIIS.json" }, { - "name": "0.20mm Standard @MINIIS 0.6", "sub_path": "process/0.20mm Standard @MINIIS 0.6.json" }, { - "name": "0.20mm Speed @MINIIS", "sub_path": "process/0.20mm Speed @MINIIS.json" }, { - "name": "0.20mm Speed @MINIIS 0.6", "sub_path": "process/0.20mm Speed @MINIIS 0.6.json" }, - - { - "name": "0.25mm Standard @MINIIS", "sub_path": "process/0.25mm Standard @MINIIS.json" }, { - "name": "0.25mm Speed @MINIIS", "sub_path": "process/0.25mm Speed @MINIIS.json" }, { - "name": "0.30mm Detail @MINIIS", "sub_path": "process/0.30mm Detail @MINIIS.json" }, { - "name": "0.35mm Standard @MINIIS", "sub_path": "process/0.35mm Standard @MINIIS.json" }, { - "name": "0.40mm Standard @MINIIS", "sub_path": "process/0.40mm Standard @MINIIS.json" }, { - "name": "0.24mm Standard @MK4", "sub_path": "process/0.24mm Standard @MK4.json" }, { - "name": "0.28mm Standard @MK4", "sub_path": "process/0.28mm Standard @MK4.json" }, { - "name": "0.32mm Standard @MK4", "sub_path": "process/0.32mm Standard @MK4.json" }, { - "name": "0.40mm Standard @MK4", "sub_path": "process/0.40mm Standard @MK4.json" }, { - "name": "0.56mm Standard @MK4", "sub_path": "process/0.56mm Standard @MK4.json" + }, + { + "name": "0.15mm Structural @XLIS 0.25", + "sub_path": "process/0.15mm Structural @XLIS 0.25.json" + }, + { + "name": "0.15mm Speed @XLIS 0.25", + "sub_path": "process/0.15mm Speed @XLIS 0.25.json" + }, + { + "name": "0.12mm Structural @XLIS 0.25", + "sub_path": "process/0.12mm Structural @XLIS 0.25.json" + }, + { + "name": "0.12mm Speed @XLIS 0.25", + "sub_path": "process/0.12mm Speed @XLIS 0.25.json" + }, + { + "name": "0.07mm Detail @XLIS 0.25", + "sub_path": "process/0.07mm Detail @XLIS 0.25.json" + }, + { + "name": "0.05mm Detail @XLIS 0.25", + "sub_path": "process/0.05mm Detail @XLIS 0.25.json" + }, + { + "name": "0.20mm Speed @XLIS 0.3", + "sub_path": "process/0.20mm Speed @XLIS 0.3.json" + }, + { + "name": "0.16mm Structural @XLIS 0.3", + "sub_path": "process/0.16mm Structural @XLIS 0.3.json" + }, + { + "name": "0.16mm Speed @XLIS 0.3", + "sub_path": "process/0.16mm Speed @XLIS 0.3.json" + }, + { + "name": "0.12mm Structural @XLIS 0.3", + "sub_path": "process/0.12mm Structural @XLIS 0.3.json" + }, + { + "name": "0.25mm Structural @XLIS 0.4", + "sub_path": "process/0.25mm Structural @XLIS 0.4.json" + }, + { + "name": "0.20mm Structural @XLIS 0.4", + "sub_path": "process/0.20mm Structural @XLIS 0.4.json" + }, + { + "name": "0.20mm Speed @XLIS 0.4", + "sub_path": "process/0.20mm Speed @XLIS 0.4.json" + }, + { + "name": "0.15mm Structural @XLIS 0.4", + "sub_path": "process/0.15mm Structural @XLIS 0.4.json" + }, + { + "name": "0.15mm Speed @XLIS 0.4", + "sub_path": "process/0.15mm Speed @XLIS 0.4.json" + }, + { + "name": "0.10mm FastDetail @XLIS 0.4", + "sub_path": "process/0.10mm FastDetail @XLIS 0.4.json" + }, + { + "name": "0.25mm Structural @XLIS 0.5", + "sub_path": "process/0.25mm Structural @XLIS 0.5.json" + }, + { + "name": "0.25mm Speed @XLIS 0.5", + "sub_path": "process/0.25mm Speed @XLIS 0.5.json" + }, + { + "name": "0.20mm Structural @XLIS 0.5", + "sub_path": "process/0.20mm Structural @XLIS 0.5.json" + }, + { + "name": "0.20mm Speed @XLIS 0.5", + "sub_path": "process/0.20mm Speed @XLIS 0.5.json" + }, + { + "name": "0.15mm Structural @XLIS 0.5", + "sub_path": "process/0.15mm Structural @XLIS 0.5.json" + }, + { + "name": "0.10mm Structural @XLIS 0.5", + "sub_path": "process/0.10mm Structural @XLIS 0.5.json" + }, + { + "name": "0.32mm Structural @XLIS 0.6", + "sub_path": "process/0.32mm Structural @XLIS 0.6.json" + }, + { + "name": "0.32mm Speed @XLIS 0.6", + "sub_path": "process/0.32mm Speed @XLIS 0.6.json" + }, + { + "name": "0.25mm Structural @XLIS 0.6", + "sub_path": "process/0.25mm Structural @XLIS 0.6.json" + }, + { + "name": "0.25mm Speed @XLIS 0.6", + "sub_path": "process/0.25mm Speed @XLIS 0.6.json" + }, + { + "name": "0.20mm Structural @XLIS 0.6", + "sub_path": "process/0.20mm Structural @XLIS 0.6.json" + }, + { + "name": "0.20mm Speed @XLIS 0.6", + "sub_path": "process/0.20mm Speed @XLIS 0.6.json" + }, + { + "name": "0.15mm Structural @XLIS 0.6", + "sub_path": "process/0.15mm Structural @XLIS 0.6.json" + }, + { + "name": "0.55mm Draft @XLIS 0.8", + "sub_path": "process/0.55mm Draft @XLIS 0.8.json" + }, + { + "name": "0.40mm Quality @XLIS 0.8", + "sub_path": "process/0.40mm Quality @XLIS 0.8.json" + }, + { + "name": "0.30mm Detail @XLIS 0.8", + "sub_path": "process/0.30mm Detail @XLIS 0.8.json" } ], "filament_list": [ @@ -309,6 +416,10 @@ "name": "fdm_filament_pc", "sub_path": "filament/fdm_filament_pc.json" }, + { + "name": "fdm_filament_pccf", + "sub_path": "filament/fdm_filament_pccf.json" + }, { "name": "fdm_filament_asa", "sub_path": "filament/fdm_filament_asa.json" @@ -317,10 +428,18 @@ "name": "fdm_filament_pva", "sub_path": "filament/fdm_filament_pva.json" }, + { + "name": "fdm_filament_pvb", + "sub_path": "filament/fdm_filament_pvb.json" + }, { "name": "fdm_filament_pa", "sub_path": "filament/fdm_filament_pa.json" }, + { + "name": "fdm_filament_pa11cf", + "sub_path": "filament/fdm_filament_pa11cf.json" + }, { "name": "Prusa Generic PLA", "sub_path": "filament/Prusa Generic PLA.json" @@ -345,6 +464,18 @@ "name": "Prusa Generic PLA @MINIIS", "sub_path": "filament/Prusa Generic PLA @MINIIS.json" }, + { + "name": "Prusa Generic PLA @XL", + "sub_path": "filament/Prusa Generic PLA @XL.json" + }, + { + "name": "Prusament PLA @XL", + "sub_path": "filament/Prusament PLA @XL.json" + }, + { + "name": "Prusament rPLA @XL", + "sub_path": "filament/Prusament rPLA @XL.json" + }, { "name": "Prusa Generic PLA-CF", "sub_path": "filament/Prusa Generic PLA-CF.json" @@ -389,6 +520,14 @@ "name": "Prusa Generic PETG @MINIIS 0.8", "sub_path": "filament/Prusa Generic PETG @MINIIS 0.8.json" }, + { + "name": "Prusa Generic PETG @XL", + "sub_path": "filament/Prusa Generic PETG @XL.json" + }, + { + "name": "Prusament PETG @XL", + "sub_path": "filament/Prusament PETG @XL.json" + }, { "name": "Prusa Generic ABS", "sub_path": "filament/Prusa Generic ABS.json" @@ -413,6 +552,10 @@ "name": "Prusa Generic ABS @MINIIS 0.8", "sub_path": "filament/Prusa Generic ABS @MINIIS 0.8.json" }, + { + "name": "Prusa Generic ABS @XL", + "sub_path": "filament/Prusa Generic ABS @XL.json" + }, { "name": "Prusa Generic TPU", "sub_path": "filament/Prusa Generic TPU.json" @@ -449,6 +592,10 @@ "name": "Prusa Generic ASA @MINIIS 0.8", "sub_path": "filament/Prusa Generic ASA @MINIIS 0.8.json" }, + { + "name": "Prusament ASA @XL", + "sub_path": "filament/Prusament ASA @XL.json" + }, { "name": "Prusa Generic PC", "sub_path": "filament/Prusa Generic PC.json" @@ -469,6 +616,14 @@ "name": "Prusa Generic PC @MINIIS 0.8", "sub_path": "filament/Prusa Generic PC @MINIIS 0.8.json" }, + { + "name": "Prusament PC Blend @XL", + "sub_path": "filament/Prusament PC Blend @XL.json" + }, + { + "name": "Prusament PC-CF @XL", + "sub_path": "filament/Prusament PC-CF @XL.json" + }, { "name": "Prusa Generic PVA", "sub_path": "filament/Prusa Generic PVA.json" @@ -489,6 +644,10 @@ "name": "Prusa Generic PVA @MINIIS 0.8", "sub_path": "filament/Prusa Generic PVA @MINIIS 0.8.json" }, + { + "name": "Prusament PVB @XL", + "sub_path": "filament/Prusament PVB @XL.json" + }, { "name": "Prusa Generic PA", "sub_path": "filament/Prusa Generic PA.json" @@ -528,6 +687,10 @@ { "name": "Prusa Generic PA-CF @MINIIS 0.8", "sub_path": "filament/Prusa Generic PA-CF @MINIIS 0.8.json" + }, + { + "name": "Prusament PA-CF @XL", + "sub_path": "filament/Prusament PA-CF @XL.json" } ], "machine_list": [ @@ -598,6 +761,30 @@ { "name": "Prusa MINI 0.8 nozzle", "sub_path": "machine/Prusa MINI 0.8 nozzle.json" + }, + { + "name": "Prusa XLIS 0.25 nozzle", + "sub_path": "machine/Prusa XLIS 0.25 nozzle.json" + }, + { + "name": "Prusa XLIS 0.3 nozzle", + "sub_path": "machine/Prusa XLIS 0.3 nozzle.json" + }, + { + "name": "Prusa XLIS 0.4 nozzle", + "sub_path": "machine/Prusa XLIS 0.4 nozzle.json" + }, + { + "name": "Prusa XLIS 0.5 nozzle", + "sub_path": "machine/Prusa XLIS 0.5 nozzle.json" + }, + { + "name": "Prusa XLIS 0.6 nozzle", + "sub_path": "machine/Prusa XLIS 0.6 nozzle.json" + }, + { + "name": "Prusa XLIS 0.8 nozzle", + "sub_path": "machine/Prusa XLIS 0.8 nozzle.json" } ] } diff --git a/resources/profiles/Prusa/Pursa XL Input Shaper.svg b/resources/profiles/Prusa/Pursa XL Input Shaper.svg new file mode 100644 index 0000000000..ca0b2c6c79 --- /dev/null +++ b/resources/profiles/Prusa/Pursa XL Input Shaper.svg @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/resources/profiles/Prusa/Pursa XL Input Shaper_bed.stl b/resources/profiles/Prusa/Pursa XL Input Shaper_bed.stl new file mode 100644 index 0000000000..2ddf418317 Binary files /dev/null and b/resources/profiles/Prusa/Pursa XL Input Shaper_bed.stl differ diff --git a/resources/profiles/Prusa/Pursa XL Input Shaper_cover.png b/resources/profiles/Prusa/Pursa XL Input Shaper_cover.png new file mode 100644 index 0000000000..751e17261e Binary files /dev/null and b/resources/profiles/Prusa/Pursa XL Input Shaper_cover.png differ diff --git a/resources/profiles/Prusa/filament/Prusa Generic ABS @XL.json b/resources/profiles/Prusa/filament/Prusa Generic ABS @XL.json new file mode 100644 index 0000000000..8e5bdbdcb7 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic ABS @XL.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "filament_id": "GFB99_1", + "setting_id": "GFSA04", + "name": "Prusa Generic ABS @XL", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_abs", + "nozzle_temperature_intial_layer": "255", + "nozzle_temperature": "255", + "hot_plate_temp_initial_layer": "100", + "hot_plate_temp": "105", + "slow_down_min_speed": "15", + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "slow_down_layer_time": [ + "20" + ], + "fan_max_speed": [ + "15" + ], + "fan_min_speed": [ + "15" + ], + "overhang_fan_speed": [ + "25" + ], + "close_fan_the_first_x_layers": [ + "4" + ], + "filament_loading_speed_start": "19", + "filament_loading_speed": "14", + "filament_unloading_speed_start": "100", + "filament_unloading_speed": "20", + "filament_load_time": "15", + "filament_unload_time": "12", + "filament_cooling_moves": "5", + "filament_cooling_initial_speed": "10", + "filament_cooling_final_speed": "50", + "filament_retract_lift_below": "1.5", + "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle", + "Pursa XLIS 0.3 nozzle", + "Prusa XLIS 0.4 nozzle", + "Prusa XLIS 0.5 nozzle", + "Prusa XLIS 0.6 nozzle", + "Prusa XLIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic PETG @XL.json b/resources/profiles/Prusa/filament/Prusa Generic PETG @XL.json new file mode 100644 index 0000000000..1b026b20f9 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PETG @XL.json @@ -0,0 +1,57 @@ +{ + "type": "filament", + "filament_id": "GFL99_1", + "setting_id": "GFSA04", + "name": "Prusa Generic PETG @XL", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pet", + "nozzle_temperature_intial_layer": "230", + "nozzle_temperature": "240", + "hot_plate_temp_initial_layer": "80", + "hot_plate_temp": "80", + "full_fan_speed_layer": "5", + "slow_down_min_speed": "15", + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "slow_down_layer_time": [ + "9" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "overhang_fan_speed": [ + "50" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_loading_speed_start": "50", + "filament_loading_speed": "10", + "filament_unloading_speed_start": "100", + "filament_unloading_speed": "100", + "filament_load_time": "10.5", + "filament_unload_time": "8.5", + "filament_cooling_moves": "3", + "filament_cooling_initial_speed": "5", + "filament_cooling_final_speed": "2.5", + "filament_retract_lift_below": "1.5", + "filament_wipe": "1", + "filament_retract_before_wipe": "20%", + "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle", + "Pursa XLIS 0.3 nozzle", + "Prusa XLIS 0.4 nozzle", + "Prusa XLIS 0.5 nozzle", + "Prusa XLIS 0.6 nozzle", + "Prusa XLIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusa Generic PLA @XL.json b/resources/profiles/Prusa/filament/Prusa Generic PLA @XL.json new file mode 100644 index 0000000000..8f8604d467 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusa Generic PLA @XL.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "filament_id": "GFL99_1", + "setting_id": "GFSA04", + "name": "Prusa Generic PLA @XL", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "nozzle_temperature_intial_layer": "215", + "nozzle_temperature": "210", + "hot_plate_temp_initial_layer": "60", + "hot_plate_temp": "60", + "full_fan_speed_layer": "3", + "slow_down_min_speed": "15", + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "slow_down_layer_time": [ + "10" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "filament_loading_speed_start": "50", + "filament_loading_speed": "10", + "filament_unloading_speed_start": "100", + "filament_unloading_speed": "100", + "filament_load_time": "10.5", + "filament_unload_time": "8.5", + "filament_cooling_moves": "2", + "filament_cooling_initial_speed": "10", + "filament_cooling_final_speed": "3.5", + "filament_retract_lift_below": "0.6", + "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle", + "Pursa XLIS 0.3 nozzle", + "Prusa XLIS 0.4 nozzle", + "Prusa XLIS 0.5 nozzle", + "Prusa XLIS 0.6 nozzle", + "Prusa XLIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament ASA @XL.json b/resources/profiles/Prusa/filament/Prusament ASA @XL.json new file mode 100644 index 0000000000..cb056319bf --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament ASA @XL.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "filament_id": "GFB98", + "setting_id": "GFSA04", + "name": "Prusament ASA @XL", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_asa", + "nozzle_temperature_intial_layer": "260", + "nozzle_temperature": "260", + "hot_plate_temp_initial_layer": "100", + "hot_plate_temp": "105", + "filament_flow_ratio": [ + "1" + ], + "fan_max_speed": [ + "10" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_speed": [ + "30" + ], + "close_fan_the_first_x_layers": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ], + "slow_down_layer_time": [ + "15" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_loading_speed_start": "19", + "filament_loading_speed": "14", + "filament_unloading_speed_start": "100", + "filament_unloading_speed": "20", + "filament_load_time": "15", + "filament_unload_time": "12", + "filament_cooling_moves": "5", + "filament_cooling_initial_speed": "10", + "filament_cooling_final_speed": "50", + "filament_retract_lift_below": "1.5", + "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle", + "Pursa XLIS 0.3 nozzle", + "Prusa XLIS 0.4 nozzle", + "Prusa XLIS 0.5 nozzle", + "Prusa XLIS 0.6 nozzle", + "Prusa XLIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PA-CF @XL.json b/resources/profiles/Prusa/filament/Prusament PA-CF @XL.json new file mode 100644 index 0000000000..f17a18a694 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PA-CF @XL.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSA04", + "name": "Prusament PA-CF @XL", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pa11cf", + "nozzle_temperature_intial_layer": "275", + "nozzle_temperature": "285", + "hot_plate_temp_initial_layer": "100", + "hot_plate_temp": "105", + "filament_flow_ratio": [ + "1.05" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "overhang_fan_speed": [ + "30" + ], + "close_fan_the_first_x_layers": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ], + "slow_down_layer_time": [ + "20" + ], + "filament_max_volumetric_speed": [ + "6.5" + ], + "filament_loading_speed_start": "19", + "filament_loading_speed": "14", + "filament_unloading_speed_start": "100", + "filament_unloading_speed": "20", + "filament_load_time": "15", + "filament_unload_time": "12", + "filament_cooling_moves": "5", + "filament_cooling_initial_speed": "10", + "filament_cooling_final_speed": "50", + "filament_retract_lift_below": "1.5", + "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle", + "Pursa XLIS 0.3 nozzle", + "Prusa XLIS 0.4 nozzle", + "Prusa XLIS 0.5 nozzle", + "Prusa XLIS 0.6 nozzle", + "Prusa XLIS 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @XL.json b/resources/profiles/Prusa/filament/Prusament PC Blend @XL.json new file mode 100644 index 0000000000..dbe4ebc963 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend @XL.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "filament_id": "GFL99_1", + "setting_id": "GFSA04", + "name": "Prusament PC Blend @XL", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pc", + "nozzle_temperature_intial_layer": "275", + "nozzle_temperature": "275", + "hot_plate_temp_initial_layer": "100", + "hot_plate_temp": "105", + "filament_flow_ratio": [ + "1" + ], + "fan_max_speed": [ + "10" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_speed": [ + "30" + ], + "close_fan_the_first_x_layers": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ], + "slow_down_layer_time": [ + "20" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "filament_loading_speed_start": "19", + "filament_loading_speed": "14", + "filament_unloading_speed_start": "100", + "filament_unloading_speed": "20", + "filament_load_time": "15", + "filament_unload_time": "12", + "filament_cooling_moves": "5", + "filament_cooling_initial_speed": "10", + "filament_cooling_final_speed": "50", + "filament_retract_lift_below": "1.5", + "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle", + "Pursa XLIS 0.3 nozzle", + "Prusa XLIS 0.4 nozzle", + "Prusa XLIS 0.5 nozzle", + "Prusa XLIS 0.6 nozzle", + "Prusa XLIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PC-CF @XL.json b/resources/profiles/Prusa/filament/Prusament PC-CF @XL.json new file mode 100644 index 0000000000..e8d1d3e723 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC-CF @XL.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "filament_id": "GFL99_1", + "setting_id": "GFSA04", + "name": "Prusament PC-CF @XL", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pccf", + "nozzle_temperature_intial_layer": "285", + "nozzle_temperature": "285", + "hot_plate_temp_initial_layer": "100", + "hot_plate_temp": "105", + "filament_flow_ratio": [ + "1.04" + ], + "fan_max_speed": [ + "10" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_speed": [ + "30" + ], + "close_fan_the_first_x_layers": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ], + "slow_down_layer_time": [ + "20" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_loading_speed_start": "19", + "filament_loading_speed": "14", + "filament_unloading_speed_start": "100", + "filament_unloading_speed": "20", + "filament_load_time": "15", + "filament_unload_time": "12", + "filament_cooling_moves": "5", + "filament_cooling_initial_speed": "10", + "filament_cooling_final_speed": "50", + "filament_retract_lift_below": "1.5", + "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle", + "Pursa XLIS 0.3 nozzle", + "Prusa XLIS 0.4 nozzle", + "Prusa XLIS 0.5 nozzle", + "Prusa XLIS 0.6 nozzle", + "Prusa XLIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PETG @XL.json b/resources/profiles/Prusa/filament/Prusament PETG @XL.json new file mode 100644 index 0000000000..4eaa849d03 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PETG @XL.json @@ -0,0 +1,57 @@ +{ + "type": "filament", + "filament_id": "GFL99_1", + "setting_id": "GFSA04", + "name": "Prusament PETG @XL", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pet", + "nozzle_temperature_intial_layer": "240", + "nozzle_temperature": "250", + "hot_plate_temp_initial_layer": "80", + "hot_plate_temp": "80", + "full_fan_speed_layer": "5", + "slow_down_min_speed": "15", + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "9.5" + ], + "slow_down_layer_time": [ + "9" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "overhang_fan_speed": [ + "50" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_loading_speed_start": "50", + "filament_loading_speed": "10", + "filament_unloading_speed_start": "100", + "filament_unloading_speed": "100", + "filament_load_time": "10.5", + "filament_unload_time": "8.5", + "filament_cooling_moves": "3", + "filament_cooling_initial_speed": "5", + "filament_cooling_final_speed": "2.5", + "filament_retract_lift_below": "1.5", + "filament_wipe": "1", + "filament_retract_before_wipe": "20%", + "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.07{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.053{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.032{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle", + "Pursa XLIS 0.3 nozzle", + "Prusa XLIS 0.4 nozzle", + "Prusa XLIS 0.5 nozzle", + "Prusa XLIS 0.6 nozzle", + "Prusa XLIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PLA @XL.json b/resources/profiles/Prusa/filament/Prusament PLA @XL.json new file mode 100644 index 0000000000..3ee68ba1b5 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PLA @XL.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "filament_id": "GFL99_1", + "setting_id": "GFSA04", + "name": "Prusament PLA @XL", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "nozzle_temperature_intial_layer": "215", + "nozzle_temperature": "215", + "hot_plate_temp_initial_layer": "60", + "hot_plate_temp": "60", + "full_fan_speed_layer": "3", + "slow_down_min_speed": "15", + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "slow_down_layer_time": [ + "10" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "filament_loading_speed_start": "50", + "filament_loading_speed": "10", + "filament_unloading_speed_start": "100", + "filament_unloading_speed": "100", + "filament_load_time": "10.5", + "filament_unload_time": "8.5", + "filament_cooling_moves": "2", + "filament_cooling_initial_speed": "10", + "filament_cooling_final_speed": "3.5", + "filament_retract_lift_below": "0.6", + "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle", + "Pursa XLIS 0.3 nozzle", + "Prusa XLIS 0.4 nozzle", + "Prusa XLIS 0.5 nozzle", + "Prusa XLIS 0.6 nozzle", + "Prusa XLIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PVB @XL.json b/resources/profiles/Prusa/filament/Prusament PVB @XL.json new file mode 100644 index 0000000000..8e17c0ba19 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PVB @XL.json @@ -0,0 +1,57 @@ +{ + "type": "filament", + "filament_id": "GFS99", + "setting_id": "GFSA04", + "name": "Prusament PVB @XL", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pvb", + "nozzle_temperature_intial_layer": "215", + "nozzle_temperature": "215", + "hot_plate_temp_initial_layer": "75", + "hot_plate_temp": "75", + "slow_down_min_speed": "15", + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "slow_down_layer_time": [ + "10" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "full_fan_speed_layer": [ + "3" + ], + "filament_loading_speed_start": "50", + "filament_loading_speed": "10", + "filament_unloading_speed_start": "100", + "filament_unloading_speed": "100", + "filament_load_time": "10.5", + "filament_unload_time": "8.5", + "filament_cooling_moves": "2", + "filament_cooling_initial_speed": "10", + "filament_cooling_final_speed": "3.5", + "filament_retract_lift_below": "0.6", + "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle", + "Pursa XLIS 0.3 nozzle", + "Prusa XLIS 0.4 nozzle", + "Prusa XLIS 0.5 nozzle", + "Prusa XLIS 0.6 nozzle", + "Prusa XLIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @XL.json b/resources/profiles/Prusa/filament/Prusament rPLA @XL.json new file mode 100644 index 0000000000..795878de73 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament rPLA @XL.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "filament_id": "GFL99_1", + "setting_id": "GFSA04", + "name": "Prusament rPLA @XL", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "nozzle_temperature_intial_layer": "205", + "nozzle_temperature": "205", + "hot_plate_temp_initial_layer": "60", + "hot_plate_temp": "60", + "full_fan_speed_layer": "3", + "slow_down_min_speed": "15", + "filament_flow_ratio": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "slow_down_layer_time": [ + "10" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_loading_speed_start": "50", + "filament_loading_speed": "10", + "filament_unloading_speed_start": "100", + "filament_unloading_speed": "100", + "filament_load_time": "10.5", + "filament_unload_time": "8.5", + "filament_cooling_moves": "2", + "filament_cooling_initial_speed": "10", + "filament_cooling_final_speed": "3.5", + "filament_retract_lift_below": "0.6", + "filament_start_gcode": "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle", + "Pursa XLIS 0.3 nozzle", + "Prusa XLIS 0.4 nozzle", + "Prusa XLIS 0.5 nozzle", + "Prusa XLIS 0.6 nozzle", + "Prusa XLIS 0.8 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/fdm_filament_pa11cf.json b/resources/profiles/Prusa/filament/fdm_filament_pa11cf.json new file mode 100644 index 0000000000..3be757e798 --- /dev/null +++ b/resources/profiles/Prusa/filament/fdm_filament_pa11cf.json @@ -0,0 +1,79 @@ +{ + "type": "filament", + "name": "fdm_filament_pa11cf", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common", + "cool_plate_temp" : [ + "0" + ], + "eng_plate_temp" : [ + "100" + ], + "hot_plate_temp" : [ + "100" + ], + "cool_plate_temp_initial_layer" : [ + "0" + ], + "eng_plate_temp_initial_layer" : [ + "100" + ], + "hot_plate_temp_initial_layer" : [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "4" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "PA11-CF" + ], + "filament_density": [ + "1.04" + ], + "filament_cost": [ + "20" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "0" + ], + "overhang_fan_speed": [ + "30" + ], + "nozzle_temperature": [ + "290" + ], + "temperature_vitrification": [ + "108" + ], + "nozzle_temperature_range_low": [ + "270" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "2" + ] +} diff --git a/resources/profiles/Prusa/filament/fdm_filament_pccf.json b/resources/profiles/Prusa/filament/fdm_filament_pccf.json new file mode 100644 index 0000000000..483e28036a --- /dev/null +++ b/resources/profiles/Prusa/filament/fdm_filament_pccf.json @@ -0,0 +1,82 @@ +{ + "type": "filament", + "name": "fdm_filament_pccf", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common", + "cool_plate_temp" : [ + "0" + ], + "eng_plate_temp" : [ + "110" + ], + "hot_plate_temp" : [ + "110" + ], + "cool_plate_temp_initial_layer" : [ + "0" + ], + "eng_plate_temp_initial_layer" : [ + "110" + ], + "hot_plate_temp_initial_layer" : [ + "110" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_max_volumetric_speed": [ + "23.2" + ], + "filament_type": [ + "PC-CF" + ], + "filament_density": [ + "1.04" + ], + "filament_cost": [ + "20" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "25%" + ], + "overhang_fan_speed": [ + "60" + ], + "nozzle_temperature": [ + "280" + ], + "temperature_vitrification": [ + "140" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "2" + ] +} diff --git a/resources/profiles/Prusa/filament/fdm_filament_pvb.json b/resources/profiles/Prusa/filament/fdm_filament_pvb.json new file mode 100644 index 0000000000..db5fa7823b --- /dev/null +++ b/resources/profiles/Prusa/filament/fdm_filament_pvb.json @@ -0,0 +1,94 @@ +{ + "type": "filament", + "name": "fdm_filament_pvb", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common", + "cool_plate_temp" : [ + "35" + ], + "eng_plate_temp" : [ + "0" + ], + "hot_plate_temp" : [ + "45" + ], + "cool_plate_temp_initial_layer" : [ + "35" + ], + "eng_plate_temp_initial_layer" : [ + "0" + ], + "hot_plate_temp_initial_layer" : [ + "45" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_soluble": [ + "1" + ], + "filament_is_support": [ + "1" + ], + "filament_type": [ + "PVB" + ], + "filament_density": [ + "1.24" + ], + "filament_cost": [ + "20" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "nozzle_temperature": [ + "220" + ], + "temperature_vitrification": [ + "50" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "4" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/Prusa/machine/Prusa XLIS 0.25 nozzle.json b/resources/profiles/Prusa/machine/Prusa XLIS 0.25 nozzle.json new file mode 100644 index 0000000000..f8ee60e938 --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa XLIS 0.25 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "machine", + "setting_id": "GM003", + "name": "Prusa XLIS 0.25 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_machine_common", + "gcode_flavor": "marlin2", + "printer_model": "Pursa XL Input Shaper", + "default_filament_profile": "Prusa Generic PLA @XL", + "default_print_profile": "0.15mm Speed @XLIS 0.25", + "extruder_clearance_radius": "67", + "extruder_clearance_height_to_rod": "21", + "extruder_clearance_height_to_lid": "21", + "printer_variant": "0.25", + "nozzle_diameter": [ + "0.25" + ], + "max_layer_height": "0.15", + "min_layer_height": "0.05", + "bed_exclude_area": [ + "0x0" + ], + "printable_area": [ + "0x0", + "360x0", + "360x360", + "0x360" + ], + "machine_max_acceleration_e": [ + "2500", + "2500" + ], + "machine_max_acceleration_extruding": [ + "4000", + "4000" + ], + "machine_max_acceleration_retracting": [ + "1200", + "1200" + ], + "machine_max_acceleration_x": [ + "7000", + "7000" + ], + "machine_max_acceleration_y": [ + "7000", + "7000" + ], + "machine_max_acceleration_z": [ + "200", + "200" + ], + "machine_max_acceleration_travel": [ + "2500", + "2500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "400", + "400" + ], + "machine_max_speed_y": [ + "400", + "400" + ], + "machine_max_speed_z": [ + "12", + "12" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "retraction_length": "0.8", + "retraction_speed": "35", + "detraction_speed": "25", + "retraction_minimum_travel": "1.5", + "retract_when_changing_layer": "1", + "wipe": "1", + "retract_before_wipe": "80%", + "retract_lift_below": "1.5", + "z_hop_types": "slope", + "host_type": "prusalink", + "printable_height": "360", + "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720{endif} ; Move bed down\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X6 Y350 F6000 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+100, max_print_height)} F300{endif} ; Move bed down\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM221 S100 ; reset flow percentage\nM84 ; disable motors\n; max_layer_z = [max_layer_z]", + "machine_pause_gcode": "M601", + "machine_start_gcode": "M17 ; enable steppers\nM862.3 P \"XL\" ; printer model check\nM115 U6.0.1+14848\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; set print area\nM555 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])}\n; inform about nozzle diameter\nM862.1 P[nozzle_diameter]\n; set & wait for bed and extruder temp for MBL\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; set extruder temp for bed leveling\nM109 T0 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; wait for temp\n; home carriage, pick tool, home all\nG28 XY\nM84 E ; turn off E motor\nG28 Z\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG29 G ; absorb heat\n; move to the nozzle cleanup area\nG1 X{(min(((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))), first_layer_print_min[0])) + 32} Y{(min((first_layer_print_min[1] - 7), first_layer_print_min[1]))} Z{5} F4800\nM302 S160 ; lower cold extrusion limit to 160C\nG1 E{-(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; retraction for nozzle cleanup\n; nozzle cleanup\nM84 E ; turn off E motor\nG29 P9 X{((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)))} Y{(first_layer_print_min[1] - 7)} W{32} H{7}\nG0 Z10 F480 ; move away in Z\n{if first_layer_bed_temperature[0] > 60}\nG0 Z70 F480 ; move away (a bit more) in Z\nG0 X30 Y{print_bed_min[1]} F6000 ; move away in X/Y for higher bed temperatures\n{endif}\nM106 S100 ; cool off the nozzle\nM107 ; stop cooling off the nozzle - turn off the fan\n; MBL\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X30 Y0 W50 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\nM104 S[first_layer_temperature] ; set extruder temp\nG1 Z10 F720 ; move away in Z\nG0 X30 Y-8 F6000 ; move next to the sheet\n; wait for extruder temp\nM109 T0 S{first_layer_temperature[0]}\n;\n; purge\n;\nG92 E0 ; reset extruder position\nG0 X{(0 == 0 ? 30 : (0 == 1 ? 150 : (0 == 2 ? 210 : 330)))} Y{(0 < 4 ? -8 : -5.5)} ; move close to the sheet's edge\nG1 E{(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E10 X40 Z0.2 F500 ; purge\nG0 X70 E9 F800 ; purge\nG0 X{70 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{70 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG92 E0 ; reset extruder position", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]", + "change_filament_gcode": "M600\nG1 E0.3 F1500 ; prime after color change", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_XLIS\nPG\nINPUT_SHAPER", + "scan_first_layer": "0", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "0", + "thumbnails": [ + "16x16/QOI", + "313x173/QOI", + "440x240/QOI", + "480x240/QOI", + "640x480/PNG" + ] +} diff --git a/resources/profiles/Prusa/machine/Prusa XLIS 0.3 nozzle.json b/resources/profiles/Prusa/machine/Prusa XLIS 0.3 nozzle.json new file mode 100644 index 0000000000..b3ef7672e2 --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa XLIS 0.3 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "machine", + "setting_id": "GM003", + "name": "Prusa XLIS 0.3 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_machine_common", + "gcode_flavor": "marlin2", + "printer_model": "Pursa XL Input Shaper", + "default_filament_profile": "Prusa Generic PLA @XL", + "default_print_profile": "0.20mm Speed @XLIS 0.3", + "extruder_clearance_radius": "67", + "extruder_clearance_height_to_rod": "21", + "extruder_clearance_height_to_lid": "21", + "printer_variant": "0.3", + "nozzle_diameter": [ + "0.3" + ], + "max_layer_height": "0.22", + "min_layer_height": "0.05", + "bed_exclude_area": [ + "0x0" + ], + "printable_area": [ + "0x0", + "360x0", + "360x360", + "0x360" + ], + "machine_max_acceleration_e": [ + "2500", + "2500" + ], + "machine_max_acceleration_extruding": [ + "4000", + "4000" + ], + "machine_max_acceleration_retracting": [ + "1200", + "1200" + ], + "machine_max_acceleration_x": [ + "7000", + "7000" + ], + "machine_max_acceleration_y": [ + "7000", + "7000" + ], + "machine_max_acceleration_z": [ + "200", + "200" + ], + "machine_max_acceleration_travel": [ + "3000", + "3000" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "400", + "400" + ], + "machine_max_speed_y": [ + "400", + "400" + ], + "machine_max_speed_z": [ + "12", + "12" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "retraction_length": "0.7", + "retraction_speed": "35", + "detraction_speed": "25", + "retraction_minimum_travel": "1.5", + "retract_when_changing_layer": "1", + "wipe": "1", + "retract_before_wipe": "80%", + "retract_lift_below": "1.5", + "z_hop_types": "slope", + "host_type": "prusalink", + "printable_height": "360", + "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720{endif} ; Move bed down\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X6 Y350 F6000 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+100, max_print_height)} F300{endif} ; Move bed down\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM221 S100 ; reset flow percentage\nM84 ; disable motors\n; max_layer_z = [max_layer_z]", + "machine_pause_gcode": "M601", + "machine_start_gcode": "M17 ; enable steppers\nM862.3 P \"XL\" ; printer model check\nM115 U6.0.1+14848\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; set print area\nM555 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])}\n; inform about nozzle diameter\nM862.1 P[nozzle_diameter]\n; set & wait for bed and extruder temp for MBL\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; set extruder temp for bed leveling\nM109 T0 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; wait for temp\n; home carriage, pick tool, home all\nG28 XY\nM84 E ; turn off E motor\nG28 Z\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG29 G ; absorb heat\n; move to the nozzle cleanup area\nG1 X{(min(((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))), first_layer_print_min[0])) + 32} Y{(min((first_layer_print_min[1] - 7), first_layer_print_min[1]))} Z{5} F4800\nM302 S160 ; lower cold extrusion limit to 160C\nG1 E{-(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; retraction for nozzle cleanup\n; nozzle cleanup\nM84 E ; turn off E motor\nG29 P9 X{((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)))} Y{(first_layer_print_min[1] - 7)} W{32} H{7}\nG0 Z10 F480 ; move away in Z\n{if first_layer_bed_temperature[0] > 60}\nG0 Z70 F480 ; move away (a bit more) in Z\nG0 X30 Y{print_bed_min[1]} F6000 ; move away in X/Y for higher bed temperatures\n{endif}\nM106 S100 ; cool off the nozzle\nM107 ; stop cooling off the nozzle - turn off the fan\n; MBL\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X30 Y0 W50 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\nM104 S[first_layer_temperature] ; set extruder temp\nG1 Z10 F720 ; move away in Z\nG0 X30 Y-8 F6000 ; move next to the sheet\n; wait for extruder temp\nM109 T0 S{first_layer_temperature[0]}\n;\n; purge\n;\nG92 E0 ; reset extruder position\nG0 X{(0 == 0 ? 30 : (0 == 1 ? 150 : (0 == 2 ? 210 : 330)))} Y{(0 < 4 ? -8 : -5.5)} ; move close to the sheet's edge\nG1 E{(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E10 X40 Z0.2 F500 ; purge\nG0 X70 E9 F800 ; purge\nG0 X{70 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{70 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG92 E0 ; reset extruder position", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]", + "change_filament_gcode": "M600\nG1 E0.3 F1500 ; prime after color change", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_XLIS\nPG\nINPUT_SHAPER", + "scan_first_layer": "0", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "0", + "thumbnails": [ + "16x16/QOI", + "313x173/QOI", + "440x240/QOI", + "480x240/QOI", + "640x480/PNG" + ] +} diff --git a/resources/profiles/Prusa/machine/Prusa XLIS 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa XLIS 0.4 nozzle.json new file mode 100644 index 0000000000..9fc8e9ac87 --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa XLIS 0.4 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "machine", + "setting_id": "GM003", + "name": "Prusa XLIS 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_machine_common", + "gcode_flavor": "marlin2", + "printer_model": "Pursa XL Input Shaper", + "default_filament_profile": "Prusa Generic PLA @XL", + "default_print_profile": "0.20mm Speed @XLIS 0.4", + "extruder_clearance_radius": "67", + "extruder_clearance_height_to_rod": "21", + "extruder_clearance_height_to_lid": "21", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4" + ], + "max_layer_height": "0.3", + "min_layer_height": "0.07", + "bed_exclude_area": [ + "0x0" + ], + "printable_area": [ + "0x0", + "360x0", + "360x360", + "0x360" + ], + "machine_max_acceleration_e": [ + "2500", + "2500" + ], + "machine_max_acceleration_extruding": [ + "4000", + "4000" + ], + "machine_max_acceleration_retracting": [ + "1200", + "1200" + ], + "machine_max_acceleration_x": [ + "7000", + "7000" + ], + "machine_max_acceleration_y": [ + "7000", + "7000" + ], + "machine_max_acceleration_z": [ + "200", + "200" + ], + "machine_max_acceleration_travel": [ + "5000", + "5000" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "400", + "400" + ], + "machine_max_speed_y": [ + "400", + "400" + ], + "machine_max_speed_z": [ + "12", + "12" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "retraction_length": "0.8", + "retraction_speed": "35", + "detraction_speed": "25", + "retraction_minimum_travel": "1.5", + "retract_when_changing_layer": "1", + "wipe": "1", + "retract_before_wipe": "80%", + "retract_lift_below": "1.5", + "z_hop_types": "slope", + "host_type": "prusalink", + "printable_height": "360", + "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720{endif} ; Move bed down\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X6 Y350 F6000 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+100, max_print_height)} F300{endif} ; Move bed down\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM221 S100 ; reset flow percentage\nM84 ; disable motors\n; max_layer_z = [max_layer_z]", + "machine_pause_gcode": "M601", + "machine_start_gcode": "M17 ; enable steppers\nM862.3 P \"XL\" ; printer model check\nM115 U6.0.1+14848\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; set print area\nM555 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])}\n; inform about nozzle diameter\nM862.1 P[nozzle_diameter]\n; set & wait for bed and extruder temp for MBL\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; set extruder temp for bed leveling\nM109 T0 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; wait for temp\n; home carriage, pick tool, home all\nG28 XY\nM84 E ; turn off E motor\nG28 Z\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG29 G ; absorb heat\n; move to the nozzle cleanup area\nG1 X{(min(((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))), first_layer_print_min[0])) + 32} Y{(min((first_layer_print_min[1] - 7), first_layer_print_min[1]))} Z{5} F4800\nM302 S160 ; lower cold extrusion limit to 160C\nG1 E{-(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; retraction for nozzle cleanup\n; nozzle cleanup\nM84 E ; turn off E motor\nG29 P9 X{((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)))} Y{(first_layer_print_min[1] - 7)} W{32} H{7}\nG0 Z10 F480 ; move away in Z\n{if first_layer_bed_temperature[0] > 60}\nG0 Z70 F480 ; move away (a bit more) in Z\nG0 X30 Y{print_bed_min[1]} F6000 ; move away in X/Y for higher bed temperatures\n{endif}\nM106 S100 ; cool off the nozzle\nM107 ; stop cooling off the nozzle - turn off the fan\n; MBL\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X30 Y0 W50 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\nM104 S[first_layer_temperature] ; set extruder temp\nG1 Z10 F720 ; move away in Z\nG0 X30 Y-8 F6000 ; move next to the sheet\n; wait for extruder temp\nM109 T0 S{first_layer_temperature[0]}\n;\n; purge\n;\nG92 E0 ; reset extruder position\nG0 X{(0 == 0 ? 30 : (0 == 1 ? 150 : (0 == 2 ? 210 : 330)))} Y{(0 < 4 ? -8 : -5.5)} ; move close to the sheet's edge\nG1 E{(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E10 X40 Z0.2 F500 ; purge\nG0 X70 E9 F800 ; purge\nG0 X{70 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{70 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG92 E0 ; reset extruder position", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]", + "change_filament_gcode": "M600\nG1 E0.3 F1500 ; prime after color change", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_XLIS\nPG\nINPUT_SHAPER", + "scan_first_layer": "0", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "0", + "thumbnails": [ + "16x16/QOI", + "313x173/QOI", + "440x240/QOI", + "480x240/QOI", + "640x480/PNG" + ] +} diff --git a/resources/profiles/Prusa/machine/Prusa XLIS 0.5 nozzle.json b/resources/profiles/Prusa/machine/Prusa XLIS 0.5 nozzle.json new file mode 100644 index 0000000000..1b5ac3683b --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa XLIS 0.5 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "machine", + "setting_id": "GM003", + "name": "Prusa XLIS 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_machine_common", + "gcode_flavor": "marlin2", + "printer_model": "Pursa XL Input Shaper", + "default_filament_profile": "Prusa Generic PLA @XL", + "default_print_profile": "0.25mm Speed @XLIS 0.5", + "extruder_clearance_radius": "67", + "extruder_clearance_height_to_rod": "21", + "extruder_clearance_height_to_lid": "21", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5" + ], + "max_layer_height": "0.32", + "min_layer_height": "0.07", + "bed_exclude_area": [ + "0x0" + ], + "printable_area": [ + "0x0", + "360x0", + "360x360", + "0x360" + ], + "machine_max_acceleration_e": [ + "2500", + "2500" + ], + "machine_max_acceleration_extruding": [ + "4000", + "4000" + ], + "machine_max_acceleration_retracting": [ + "1200", + "1200" + ], + "machine_max_acceleration_x": [ + "7000", + "7000" + ], + "machine_max_acceleration_y": [ + "7000", + "7000" + ], + "machine_max_acceleration_z": [ + "200", + "200" + ], + "machine_max_acceleration_travel": [ + "5000", + "5000" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "400", + "400" + ], + "machine_max_speed_y": [ + "400", + "400" + ], + "machine_max_speed_z": [ + "12", + "12" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "retraction_length": "0.7", + "retraction_speed": "35", + "detraction_speed": "25", + "retraction_minimum_travel": "1.5", + "retract_when_changing_layer": "1", + "wipe": "1", + "retract_before_wipe": "80%", + "retract_lift_below": "1.5", + "z_hop_types": "slope", + "host_type": "prusalink", + "printable_height": "360", + "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720{endif} ; Move bed down\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X6 Y350 F6000 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+100, max_print_height)} F300{endif} ; Move bed down\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM221 S100 ; reset flow percentage\nM84 ; disable motors\n; max_layer_z = [max_layer_z]", + "machine_pause_gcode": "M601", + "machine_start_gcode": "M17 ; enable steppers\nM862.3 P \"XL\" ; printer model check\nM115 U6.0.1+14848\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; set print area\nM555 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])}\n; inform about nozzle diameter\nM862.1 P[nozzle_diameter]\n; set & wait for bed and extruder temp for MBL\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; set extruder temp for bed leveling\nM109 T0 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; wait for temp\n; home carriage, pick tool, home all\nG28 XY\nM84 E ; turn off E motor\nG28 Z\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG29 G ; absorb heat\n; move to the nozzle cleanup area\nG1 X{(min(((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))), first_layer_print_min[0])) + 32} Y{(min((first_layer_print_min[1] - 7), first_layer_print_min[1]))} Z{5} F4800\nM302 S160 ; lower cold extrusion limit to 160C\nG1 E{-(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; retraction for nozzle cleanup\n; nozzle cleanup\nM84 E ; turn off E motor\nG29 P9 X{((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)))} Y{(first_layer_print_min[1] - 7)} W{32} H{7}\nG0 Z10 F480 ; move away in Z\n{if first_layer_bed_temperature[0] > 60}\nG0 Z70 F480 ; move away (a bit more) in Z\nG0 X30 Y{print_bed_min[1]} F6000 ; move away in X/Y for higher bed temperatures\n{endif}\nM106 S100 ; cool off the nozzle\nM107 ; stop cooling off the nozzle - turn off the fan\n; MBL\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X30 Y0 W50 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\nM104 S[first_layer_temperature] ; set extruder temp\nG1 Z10 F720 ; move away in Z\nG0 X30 Y-8 F6000 ; move next to the sheet\n; wait for extruder temp\nM109 T0 S{first_layer_temperature[0]}\n;\n; purge\n;\nG92 E0 ; reset extruder position\nG0 X{(0 == 0 ? 30 : (0 == 1 ? 150 : (0 == 2 ? 210 : 330)))} Y{(0 < 4 ? -8 : -5.5)} ; move close to the sheet's edge\nG1 E{(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E10 X40 Z0.2 F500 ; purge\nG0 X70 E9 F800 ; purge\nG0 X{70 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{70 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG92 E0 ; reset extruder position", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]", + "change_filament_gcode": "M600\nG1 E0.3 F1500 ; prime after color change", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_XLIS\nPG\nINPUT_SHAPER", + "scan_first_layer": "0", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "0", + "thumbnails": [ + "16x16/QOI", + "313x173/QOI", + "440x240/QOI", + "480x240/QOI", + "640x480/PNG" + ] +} diff --git a/resources/profiles/Prusa/machine/Prusa XLIS 0.6 nozzle.json b/resources/profiles/Prusa/machine/Prusa XLIS 0.6 nozzle.json new file mode 100644 index 0000000000..7dd5c731ba --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa XLIS 0.6 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "machine", + "setting_id": "GM003", + "name": "Prusa XLIS 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_machine_common", + "gcode_flavor": "marlin2", + "printer_model": "Pursa XL Input Shaper", + "default_filament_profile": "Prusa Generic PLA @XL", + "default_print_profile": "0.32mm Speed @XLIS 0.6", + "extruder_clearance_radius": "67", + "extruder_clearance_height_to_rod": "21", + "extruder_clearance_height_to_lid": "21", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6" + ], + "max_layer_height": "0.4", + "min_layer_height": "0.15", + "bed_exclude_area": [ + "0x0" + ], + "printable_area": [ + "0x0", + "360x0", + "360x360", + "0x360" + ], + "machine_max_acceleration_e": [ + "2500", + "2500" + ], + "machine_max_acceleration_extruding": [ + "4000", + "4000" + ], + "machine_max_acceleration_retracting": [ + "1200", + "1200" + ], + "machine_max_acceleration_x": [ + "7000", + "7000" + ], + "machine_max_acceleration_y": [ + "7000", + "7000" + ], + "machine_max_acceleration_z": [ + "200", + "200" + ], + "machine_max_acceleration_travel": [ + "5000", + "5000" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "400", + "400" + ], + "machine_max_speed_y": [ + "400", + "400" + ], + "machine_max_speed_z": [ + "12", + "12" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "retraction_length": "0.7", + "retraction_speed": "35", + "detraction_speed": "25", + "retraction_minimum_travel": "1.5", + "retract_when_changing_layer": "1", + "wipe": "1", + "retract_before_wipe": "0%", + "retract_lift_below": "1.5", + "z_hop_types": "slope", + "host_type": "prusalink", + "printable_height": "360", + "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720{endif} ; Move bed down\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X6 Y350 F6000 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+100, max_print_height)} F300{endif} ; Move bed down\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM221 S100 ; reset flow percentage\nM84 ; disable motors\n; max_layer_z = [max_layer_z]", + "machine_pause_gcode": "M601", + "machine_start_gcode": "M17 ; enable steppers\nM862.3 P \"XL\" ; printer model check\nM115 U6.0.1+14848\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; set print area\nM555 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])}\n; inform about nozzle diameter\nM862.1 P[nozzle_diameter]\n; set & wait for bed and extruder temp for MBL\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; set extruder temp for bed leveling\nM109 T0 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; wait for temp\n; home carriage, pick tool, home all\nG28 XY\nM84 E ; turn off E motor\nG28 Z\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG29 G ; absorb heat\n; move to the nozzle cleanup area\nG1 X{(min(((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))), first_layer_print_min[0])) + 32} Y{(min((first_layer_print_min[1] - 7), first_layer_print_min[1]))} Z{5} F4800\nM302 S160 ; lower cold extrusion limit to 160C\nG1 E{-(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; retraction for nozzle cleanup\n; nozzle cleanup\nM84 E ; turn off E motor\nG29 P9 X{((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)))} Y{(first_layer_print_min[1] - 7)} W{32} H{7}\nG0 Z10 F480 ; move away in Z\n{if first_layer_bed_temperature[0] > 60}\nG0 Z70 F480 ; move away (a bit more) in Z\nG0 X30 Y{print_bed_min[1]} F6000 ; move away in X/Y for higher bed temperatures\n{endif}\nM106 S100 ; cool off the nozzle\nM107 ; stop cooling off the nozzle - turn off the fan\n; MBL\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X30 Y0 W50 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\nM104 S[first_layer_temperature] ; set extruder temp\nG1 Z10 F720 ; move away in Z\nG0 X30 Y-8 F6000 ; move next to the sheet\n; wait for extruder temp\nM109 T0 S{first_layer_temperature[0]}\n;\n; purge\n;\nG92 E0 ; reset extruder position\nG0 X{(0 == 0 ? 30 : (0 == 1 ? 150 : (0 == 2 ? 210 : 330)))} Y{(0 < 4 ? -8 : -5.5)} ; move close to the sheet's edge\nG1 E{(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E10 X40 Z0.2 F500 ; purge\nG0 X70 E9 F800 ; purge\nG0 X{70 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{70 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG92 E0 ; reset extruder position", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]", + "change_filament_gcode": "M600\nG1 E0.3 F1500 ; prime after color change", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_XLIS\nPG\nINPUT_SHAPER", + "scan_first_layer": "0", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "0", + "thumbnails": [ + "16x16/QOI", + "313x173/QOI", + "440x240/QOI", + "480x240/QOI", + "640x480/PNG" + ] +} diff --git a/resources/profiles/Prusa/machine/Prusa XLIS 0.8 nozzle.json b/resources/profiles/Prusa/machine/Prusa XLIS 0.8 nozzle.json new file mode 100644 index 0000000000..3f3326a082 --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa XLIS 0.8 nozzle.json @@ -0,0 +1,118 @@ +{ + "type": "machine", + "setting_id": "GM003", + "name": "Prusa XLIS 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_machine_common", + "gcode_flavor": "marlin2", + "printer_model": "Pursa XL Input Shaper", + "default_filament_profile": "Prusa Generic PLA @XL", + "default_print_profile": "0.40mm Quality @XLIS 0.8", + "extruder_clearance_radius": "67", + "extruder_clearance_height_to_rod": "21", + "extruder_clearance_height_to_lid": "21", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8" + ], + "max_layer_height": "0.6", + "min_layer_height": "0.2", + "bed_exclude_area": [ + "0x0" + ], + "printable_area": [ + "0x0", + "360x0", + "360x360", + "0x360" + ], + "machine_max_acceleration_e": [ + "2500", + "2500" + ], + "machine_max_acceleration_extruding": [ + "4000", + "4000" + ], + "machine_max_acceleration_retracting": [ + "1200", + "1200" + ], + "machine_max_acceleration_x": [ + "7000", + "7000" + ], + "machine_max_acceleration_y": [ + "7000", + "7000" + ], + "machine_max_acceleration_z": [ + "200", + "200" + ], + "machine_max_acceleration_travel": [ + "5000", + "5000" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "400", + "400" + ], + "machine_max_speed_y": [ + "400", + "400" + ], + "machine_max_speed_z": [ + "12", + "12" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "2", + "2" + ], + "retraction_length": "0.6", + "retraction_speed": "25", + "detraction_speed": "15", + "retraction_minimum_travel": "1.5", + "retract_when_changing_layer": "1", + "wipe": "1", + "retract_before_wipe": "50%", + "retract_lift_below": "1.5", + "z_hop_types": "slope", + "host_type": "prusalink", + "printable_height": "360", + "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720{endif} ; Move bed down\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X6 Y350 F6000 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+100, max_print_height)} F300{endif} ; Move bed down\nM900 K0 ; reset LA\nM142 S36 ; reset heatbreak target temp\nM221 S100 ; reset flow percentage\nM84 ; disable motors\n; max_layer_z = [max_layer_z]", + "machine_pause_gcode": "M601", + "machine_start_gcode": "M17 ; enable steppers\nM862.3 P \"XL\" ; printer model check\nM115 U6.0.1+14848\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; set print area\nM555 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} W{(first_layer_print_max[0]) - (first_layer_print_min[0])} H{(first_layer_print_max[1]) - (first_layer_print_min[1])}\n; inform about nozzle diameter\nM862.1 P[nozzle_diameter]\n; set & wait for bed and extruder temp for MBL\nM140 S[first_layer_bed_temperature] ; set bed temp\nM104 T0 S{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; set extruder temp for bed leveling\nM109 T0 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : (filament_type[0]=~/.*PET.*/) ? 175 : 170)} ; wait for temp\n; home carriage, pick tool, home all\nG28 XY\nM84 E ; turn off E motor\nG28 Z\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG29 G ; absorb heat\n; move to the nozzle cleanup area\nG1 X{(min(((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))), first_layer_print_min[0])) + 32} Y{(min((first_layer_print_min[1] - 7), first_layer_print_min[1]))} Z{5} F4800\nM302 S160 ; lower cold extrusion limit to 160C\nG1 E{-(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; retraction for nozzle cleanup\n; nozzle cleanup\nM84 E ; turn off E motor\nG29 P9 X{((((first_layer_print_min[0] + first_layer_print_max[0]) / 2) < ((print_bed_min[0] + print_bed_max[0]) / 2)) ? (((first_layer_print_min[1] - 7) < -2) ? 70 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)) : (((first_layer_print_min[1] - 7) < -2) ? 260 : (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)))} Y{(first_layer_print_min[1] - 7)} W{32} H{7}\nG0 Z10 F480 ; move away in Z\n{if first_layer_bed_temperature[0] > 60}\nG0 Z70 F480 ; move away (a bit more) in Z\nG0 X30 Y{print_bed_min[1]} F6000 ; move away in X/Y for higher bed temperatures\n{endif}\nM106 S100 ; cool off the nozzle\nM107 ; stop cooling off the nozzle - turn off the fan\n; MBL\nM84 E ; turn off E motor\nG29 P1 ; invalidate mbl & probe print area\nG29 P1 X30 Y0 W50 H20 C ; probe near purge place\nG29 P3.2 ; interpolate mbl probes\nG29 P3.13 ; extrapolate mbl outside probe area\nG29 A ; activate mbl\nM104 S[first_layer_temperature] ; set extruder temp\nG1 Z10 F720 ; move away in Z\nG0 X30 Y-8 F6000 ; move next to the sheet\n; wait for extruder temp\nM109 T0 S{first_layer_temperature[0]}\n;\n; purge\n;\nG92 E0 ; reset extruder position\nG0 X{(0 == 0 ? 30 : (0 == 1 ? 150 : (0 == 2 ? 210 : 330)))} Y{(0 < 4 ? -8 : -5.5)} ; move close to the sheet's edge\nG1 E{(filament_type[0] == \"FLEX\" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E10 X40 Z0.2 F500 ; purge\nG0 X70 E9 F800 ; purge\nG0 X{70 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{70 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG92 E0 ; reset extruder position", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]", + "change_filament_gcode": "M600\nG1 E0.3 F1500 ; prime after color change", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_XLIS\nPG\nINPUT_SHAPER", + "scan_first_layer": "0", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "0", + "thumbnails": [ + "16x16/QOI", + "313x173/QOI", + "440x240/QOI", + "480x240/QOI", + "640x480/PNG" + ] +} diff --git a/resources/profiles/Prusa/machine/Prusa XLIS.json b/resources/profiles/Prusa/machine/Prusa XLIS.json new file mode 100644 index 0000000000..1d0ae08f51 --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa XLIS.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Pursa XL Input Shaper", + "model_id": "Pursa XLIS", + "nozzle_diameter": "0.25;0.3;0.4;0.5;0.6;0.8", + "machine_tech": "FFF", + "family": "Prusa", + "bed_model": "Pursa XL Input Shaper_bed.stl", + "bed_texture": "Pursa XL Input Shaper.svg", + "hotend_model": "", + "default_materials": "Prusa Generic PLA @XL;Prusament PLA @XL;Prusament rPLA @XL;Prusa Generic PETG @XL;Prusament PETG @XL;Prusa Generic ABS @XL;Prusament ASA @XL;Prusament PC Blend @XL;Prusament PC-CF @XL;Prusament PVB @XL;Prusament PA-CF @XL" +} diff --git a/resources/profiles/Prusa/process/0.05mm Detail @XLIS 0.25.json b/resources/profiles/Prusa/process/0.05mm Detail @XLIS 0.25.json new file mode 100644 index 0000000000..3f91bd5da4 --- /dev/null +++ b/resources/profiles/Prusa/process/0.05mm Detail @XLIS 0.25.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.05mm Detail @XLIS 0.25", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.05", + "wall_loops": "3", + "top_shell_layers": "13", + "bottom_shell_layers": "10", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "1", + "brim_object_gap": "0", + "support_threshold_angle": "40", + "raft_first_layer_density": "95%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.1", + "support_top_z_distance": "0.1", + "support_bottom_z_distance": "0.1", + "support_base_pattern_spacing": "1", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "150%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "65", + "small_perimeter_speed": "40", + "outer_wall_speed": "40", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "100", + "top_surface_speed": "60", + "support_speed": "70", + "support_interface_speed": "75%", + "bridge_speed": "25", + "gap_infill_speed": "40", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "1500", + "outer_wall_acceleration": "800", + "inner_wall_acceleration": "1200", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "2000", + "sparse_infill_acceleration": "2500", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "500", + "travel_acceleration": "4000", + "line_width": "0.27", + "initial_layer_line_width": "0.32", + "inner_wall_line_width": "0.25", + "outer_wall_line_width": "0.25", + "sparse_infill_line_width": "0.25", + "internal_solid_infill_line_width": "0.25", + "top_surface_line_width": "0.27", + "support_line_width": "0.25", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.07mm Detail @XLIS 0.25.json b/resources/profiles/Prusa/process/0.07mm Detail @XLIS 0.25.json new file mode 100644 index 0000000000..7e41472a58 --- /dev/null +++ b/resources/profiles/Prusa/process/0.07mm Detail @XLIS 0.25.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.07mm Detail @XLIS 0.25", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.07", + "wall_loops": "3", + "top_shell_layers": "11", + "bottom_shell_layers": "9", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "1", + "brim_object_gap": "0", + "support_threshold_angle": "40", + "raft_first_layer_density": "95%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.1", + "support_top_z_distance": "0.09", + "support_bottom_z_distance": "0.09", + "support_base_pattern_spacing": "1", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "150%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "65", + "small_perimeter_speed": "40", + "outer_wall_speed": "40", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "140", + "top_surface_speed": "70", + "support_speed": "70", + "support_interface_speed": "75%", + "bridge_speed": "30", + "gap_infill_speed": "40", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "1500", + "outer_wall_acceleration": "800", + "inner_wall_acceleration": "1200", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "2000", + "sparse_infill_acceleration": "2500", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "500", + "travel_acceleration": "4000", + "line_width": "0.27", + "initial_layer_line_width": "0.32", + "inner_wall_line_width": "0.25", + "outer_wall_line_width": "0.25", + "sparse_infill_line_width": "0.25", + "internal_solid_infill_line_width": "0.25", + "top_surface_line_width": "0.27", + "support_line_width": "0.25", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.10mm FastDetail @XLIS 0.4.json b/resources/profiles/Prusa/process/0.10mm FastDetail @XLIS 0.4.json new file mode 100644 index 0000000000..b2cdb1247d --- /dev/null +++ b/resources/profiles/Prusa/process/0.10mm FastDetail @XLIS 0.4.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.10mm FastDetail @XLIS 0.4", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.1", + "wall_loops": "3", + "top_shell_layers": "8", + "bottom_shell_layers": "7", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "2", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.15", + "support_top_z_distance": "0.17", + "support_bottom_z_distance": "0.17", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "140", + "small_perimeter_speed": "140", + "outer_wall_speed": "140", + "sparse_infill_speed": "140", + "internal_solid_infill_speed": "200", + "top_surface_speed": "100", + "support_speed": "120", + "support_interface_speed": "50", + "bridge_speed": "40", + "gap_infill_speed": "120", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "2500", + "outer_wall_acceleration": "2000", + "inner_wall_acceleration": "2000", + "top_surface_acceleration": "1500", + "internal_solid_infill_acceleration": "2500", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "top_surface_line_width": "0.4", + "support_line_width": "0.36", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.10mm Structural @XLIS 0.5.json b/resources/profiles/Prusa/process/0.10mm Structural @XLIS 0.5.json new file mode 100644 index 0000000000..0a53b8f4c7 --- /dev/null +++ b/resources/profiles/Prusa/process/0.10mm Structural @XLIS 0.5.json @@ -0,0 +1,68 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.10mm Structural @XLIS 0.5", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.1", + "wall_loops": "2", + "top_shell_layers": "8", + "bottom_shell_layers": "7", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "2", + "infill_anchor_max": "15", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.25", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.22", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "70", + "small_perimeter_speed": "40", + "outer_wall_speed": "40", + "sparse_infill_speed": "200", + "internal_solid_infill_speed": "200", + "top_surface_speed": "70", + "support_speed": "75", + "support_interface_speed": "75%", + "bridge_speed": "30", + "gap_infill_speed": "40", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "2000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2000", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "2500", + "sparse_infill_acceleration": "3000", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.55", + "initial_layer_line_width": "0.55", + "inner_wall_line_width": "0.5", + "outer_wall_line_width": "0.5", + "sparse_infill_line_width": "0.5", + "internal_solid_infill_line_width": "0.5", + "top_surface_line_width": "0.45", + "support_line_width": "0.4", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.5 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.12mm Speed @XLIS 0.25.json b/resources/profiles/Prusa/process/0.12mm Speed @XLIS 0.25.json new file mode 100644 index 0000000000..046ccc32fb --- /dev/null +++ b/resources/profiles/Prusa/process/0.12mm Speed @XLIS 0.25.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Speed @XLIS 0.25", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.12", + "wall_loops": "3", + "top_shell_layers": "9", + "bottom_shell_layers": "6", + "top_shell_thickness": "0.6", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "1", + "brim_object_gap": "0", + "support_threshold_angle": "40", + "raft_first_layer_density": "95%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.08", + "support_top_z_distance": "0.09", + "support_bottom_z_distance": "0.09", + "support_base_pattern_spacing": "1", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "150%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "120", + "small_perimeter_speed": "120", + "outer_wall_speed": "120", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "140", + "top_surface_speed": "60", + "support_speed": "70", + "support_interface_speed": "75%", + "bridge_speed": "30", + "gap_infill_speed": "50", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "2000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2000", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "2500", + "sparse_infill_acceleration": "3000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "4000", + "line_width": "0.27", + "initial_layer_line_width": "0.32", + "inner_wall_line_width": "0.27", + "outer_wall_line_width": "0.27", + "sparse_infill_line_width": "0.27", + "internal_solid_infill_line_width": "0.27", + "top_surface_line_width": "0.27", + "support_line_width": "0.25", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.12mm Structural @XLIS 0.25.json b/resources/profiles/Prusa/process/0.12mm Structural @XLIS 0.25.json new file mode 100644 index 0000000000..695dd0ba85 --- /dev/null +++ b/resources/profiles/Prusa/process/0.12mm Structural @XLIS 0.25.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Structural @XLIS 0.25", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.12", + "wall_loops": "3", + "top_shell_layers": "9", + "bottom_shell_layers": "7", + "top_shell_thickness": "0.6", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "1", + "brim_object_gap": "0", + "support_threshold_angle": "40", + "raft_first_layer_density": "95%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.08", + "support_top_z_distance": "0.09", + "support_bottom_z_distance": "0.09", + "support_base_pattern_spacing": "1", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "150%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "70", + "small_perimeter_speed": "40", + "outer_wall_speed": "40", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "140", + "top_surface_speed": "60", + "support_speed": "70", + "support_interface_speed": "75%", + "bridge_speed": "30", + "gap_infill_speed": "50", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "2000", + "outer_wall_acceleration": "1000", + "inner_wall_acceleration": "1500", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "2500", + "sparse_infill_acceleration": "2500", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "4000", + "line_width": "0.27", + "initial_layer_line_width": "0.32", + "inner_wall_line_width": "0.27", + "outer_wall_line_width": "0.27", + "sparse_infill_line_width": "0.27", + "internal_solid_infill_line_width": "0.27", + "top_surface_line_width": "0.27", + "support_line_width": "0.25", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.12mm Structural @XLIS 0.3.json b/resources/profiles/Prusa/process/0.12mm Structural @XLIS 0.3.json new file mode 100644 index 0000000000..031cc6b542 --- /dev/null +++ b/resources/profiles/Prusa/process/0.12mm Structural @XLIS 0.3.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Structural @XLIS 0.3", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.12", + "wall_loops": "3", + "top_shell_layers": "7", + "bottom_shell_layers": "6", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "1", + "brim_object_gap": "0", + "support_threshold_angle": "40", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.12", + "support_top_z_distance": "0.12", + "support_bottom_z_distance": "0.12", + "support_base_pattern_spacing": "1", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "100%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "80", + "small_perimeter_speed": "40", + "outer_wall_speed": "40", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "200", + "top_surface_speed": "40", + "support_speed": "70", + "support_interface_speed": "75%", + "bridge_speed": "30", + "gap_infill_speed": "50", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "1500", + "outer_wall_acceleration": "1200", + "inner_wall_acceleration": "1500", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "2500", + "sparse_infill_acceleration": "3000", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.34", + "initial_layer_line_width": "0.4", + "inner_wall_line_width": "0.34", + "outer_wall_line_width": "0.34", + "sparse_infill_line_width": "0.34", + "internal_solid_infill_line_width": "0.34", + "top_surface_line_width": "0.3", + "support_line_width": "0.3", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0", + "compatible_printers": [ + "Prusa XLIS 0.3 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.15mm Speed @XLIS 0.25.json b/resources/profiles/Prusa/process/0.15mm Speed @XLIS 0.25.json new file mode 100644 index 0000000000..096d0b519e --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm Speed @XLIS 0.25.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Speed @XLIS 0.25", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.15", + "wall_loops": "3", + "top_shell_layers": "6", + "bottom_shell_layers": "7", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "1", + "brim_object_gap": "0", + "support_threshold_angle": "40", + "raft_first_layer_density": "95%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.08", + "support_top_z_distance": "0.09", + "support_bottom_z_distance": "0.09", + "support_base_pattern_spacing": "1", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "150%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "120", + "small_perimeter_speed": "120", + "outer_wall_speed": "120", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "140", + "top_surface_speed": "60", + "support_speed": "70", + "support_interface_speed": "75%", + "bridge_speed": "30", + "gap_infill_speed": "50", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "2000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2000", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "2500", + "sparse_infill_acceleration": "3000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "4000", + "line_width": "0.27", + "initial_layer_line_width": "0.32", + "inner_wall_line_width": "0.27", + "outer_wall_line_width": "0.27", + "sparse_infill_line_width": "0.27", + "internal_solid_infill_line_width": "0.27", + "top_surface_line_width": "0.27", + "support_line_width": "0.25", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.15mm Speed @XLIS 0.4.json b/resources/profiles/Prusa/process/0.15mm Speed @XLIS 0.4.json new file mode 100644 index 0000000000..5bbc4c9de2 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm Speed @XLIS 0.4.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Speed @XLIS 0.4", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.15", + "wall_loops": "2", + "top_shell_layers": "6", + "bottom_shell_layers": "5", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "2", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.15", + "support_top_z_distance": "0.17", + "support_bottom_z_distance": "0.17", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "170", + "small_perimeter_speed": "170", + "outer_wall_speed": "170", + "sparse_infill_speed": "200", + "internal_solid_infill_speed": "200", + "top_surface_speed": "100", + "support_speed": "120", + "support_interface_speed": "50", + "bridge_speed": "45", + "gap_infill_speed": "120", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "2500", + "outer_wall_acceleration": "2500", + "inner_wall_acceleration": "3000", + "top_surface_acceleration": "1500", + "internal_solid_infill_acceleration": "3500", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "top_surface_line_width": "0.42", + "support_line_width": "0.36", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.25.json b/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.25.json new file mode 100644 index 0000000000..b8fb3b8056 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.25.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Structural @XLIS 0.25", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.15", + "wall_loops": "3", + "top_shell_layers": "6", + "bottom_shell_layers": "5", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "1", + "brim_object_gap": "0", + "support_threshold_angle": "40", + "raft_first_layer_density": "95%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.08", + "support_top_z_distance": "0.09", + "support_bottom_z_distance": "0.09", + "support_base_pattern_spacing": "1", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "150%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "70", + "small_perimeter_speed": "40", + "outer_wall_speed": "40", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "140", + "top_surface_speed": "60", + "support_speed": "70", + "support_interface_speed": "75%", + "bridge_speed": "30", + "gap_infill_speed": "50", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "2000", + "outer_wall_acceleration": "1000", + "inner_wall_acceleration": "1500", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "2500", + "sparse_infill_acceleration": "3000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "4000", + "line_width": "0.27", + "initial_layer_line_width": "0.32", + "inner_wall_line_width": "0.27", + "outer_wall_line_width": "0.27", + "sparse_infill_line_width": "0.27", + "internal_solid_infill_line_width": "0.27", + "top_surface_line_width": "0.27", + "support_line_width": "0.25", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0", + "compatible_printers": [ + "Prusa XLIS 0.25 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.4.json b/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.4.json new file mode 100644 index 0000000000..7765edab68 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.4.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Structural @XLIS 0.4", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.15", + "wall_loops": "2", + "top_shell_layers": "6", + "bottom_shell_layers": "5", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "2", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.15", + "support_top_z_distance": "0.17", + "support_bottom_z_distance": "0.17", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "80", + "small_perimeter_speed": "45", + "outer_wall_speed": "45", + "sparse_infill_speed": "110", + "internal_solid_infill_speed": "140", + "top_surface_speed": "75", + "support_speed": "120", + "support_interface_speed": "50", + "bridge_speed": "45", + "gap_infill_speed": "65", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "90%", + "default_acceleration": "2500", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2500", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "3000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "top_surface_line_width": "0.42", + "support_line_width": "0.36", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.5.json b/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.5.json new file mode 100644 index 0000000000..31dc846f89 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.5.json @@ -0,0 +1,68 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Structural @XLIS 0.5", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.15", + "wall_loops": "2", + "top_shell_layers": "6", + "bottom_shell_layers": "5", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "2", + "infill_anchor_max": "15", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.25", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.22", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "80", + "small_perimeter_speed": "45", + "outer_wall_speed": "45", + "sparse_infill_speed": "200", + "internal_solid_infill_speed": "180", + "top_surface_speed": "70", + "support_speed": "75", + "support_interface_speed": "75%", + "bridge_speed": "40", + "gap_infill_speed": "50", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "2000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2000", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "2500", + "sparse_infill_acceleration": "3000", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.55", + "initial_layer_line_width": "0.55", + "inner_wall_line_width": "0.55", + "outer_wall_line_width": "0.55", + "sparse_infill_line_width": "0.55", + "internal_solid_infill_line_width": "0.55", + "top_surface_line_width": "0.5", + "support_line_width": "0.4", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.5 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.6.json b/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.6.json new file mode 100644 index 0000000000..eea2afc624 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm Structural @XLIS 0.6.json @@ -0,0 +1,69 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.15mm Structural @XLIS 0.6", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.15", + "wall_loops": "2", + "top_shell_layers": "6", + "bottom_shell_layers": "5", + "top_shell_thickness": "0.9", + "bottom_shell_thickness": "0.6", + "sparse_infill_density": "20%", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.25", + "support_top_z_distance": "0.22", + "support_bottom_z_distance": "0.22", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.25", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "80", + "small_perimeter_speed": "45", + "outer_wall_speed": "45", + "sparse_infill_speed": "105", + "internal_solid_infill_speed": "160", + "top_surface_speed": "70", + "support_speed": "110", + "support_interface_speed": "75%", + "bridge_speed": "40", + "gap_infill_speed": "75", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "90%", + "default_acceleration": "2500", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2500", + "top_surface_acceleration": "1500", + "internal_solid_infill_acceleration": "2500", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.68", + "initial_layer_line_width": "0.68", + "inner_wall_line_width": "0.6", + "outer_wall_line_width": "0.6", + "sparse_infill_line_width": "0.6", + "internal_solid_infill_line_width": "0.6", + "top_surface_line_width": "0.5", + "support_line_width": "0.55", + "infill_wall_overlap": "15%", + "resolution": "0.0125", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.16mm Speed @XLIS 0.3.json b/resources/profiles/Prusa/process/0.16mm Speed @XLIS 0.3.json new file mode 100644 index 0000000000..d877ec4c04 --- /dev/null +++ b/resources/profiles/Prusa/process/0.16mm Speed @XLIS 0.3.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Speed @XLIS 0.3", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.16", + "wall_loops": "3", + "top_shell_layers": "6", + "bottom_shell_layers": "5", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "1", + "brim_object_gap": "0", + "support_threshold_angle": "40", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.12", + "support_top_z_distance": "0.12", + "support_bottom_z_distance": "0.12", + "support_base_pattern_spacing": "1", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "100%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "140", + "small_perimeter_speed": "120", + "outer_wall_speed": "120", + "sparse_infill_speed": "120", + "internal_solid_infill_speed": "200", + "top_surface_speed": "50", + "support_speed": "100", + "support_interface_speed": "45%", + "bridge_speed": "30", + "gap_infill_speed": "50", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "2000", + "outer_wall_acceleration": "2500", + "inner_wall_acceleration": "2500", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "3000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.34", + "initial_layer_line_width": "0.4", + "inner_wall_line_width": "0.34", + "outer_wall_line_width": "0.34", + "sparse_infill_line_width": "0.34", + "internal_solid_infill_line_width": "0.34", + "top_surface_line_width": "0.3", + "support_line_width": "0.3", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0", + "compatible_printers": [ + "Prusa XLIS 0.3 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.16mm Structural @XLIS 0.3.json b/resources/profiles/Prusa/process/0.16mm Structural @XLIS 0.3.json new file mode 100644 index 0000000000..5d14e31d91 --- /dev/null +++ b/resources/profiles/Prusa/process/0.16mm Structural @XLIS 0.3.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Structural @XLIS 0.3", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.16", + "wall_loops": "3", + "top_shell_layers": "6", + "bottom_shell_layers": "5", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "1", + "brim_object_gap": "0", + "support_threshold_angle": "40", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.12", + "support_top_z_distance": "0.12", + "support_bottom_z_distance": "0.12", + "support_base_pattern_spacing": "1", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "100%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "80", + "small_perimeter_speed": "45", + "outer_wall_speed": "45", + "sparse_infill_speed": "120", + "internal_solid_infill_speed": "200", + "top_surface_speed": "50", + "support_speed": "70", + "support_interface_speed": "75%", + "bridge_speed": "30", + "gap_infill_speed": "50", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "2000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2000", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "2500", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.34", + "initial_layer_line_width": "0.4", + "inner_wall_line_width": "0.34", + "outer_wall_line_width": "0.34", + "sparse_infill_line_width": "0.34", + "internal_solid_infill_line_width": "0.34", + "top_surface_line_width": "0.3", + "support_line_width": "0.3", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0", + "compatible_printers": [ + "Prusa XLIS 0.3 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.3.json b/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.3.json new file mode 100644 index 0000000000..ce32faf2c2 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.3.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Speed @XLIS 0.3", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.2", + "wall_loops": "3", + "top_shell_layers": "5", + "bottom_shell_layers": "4", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "1", + "brim_object_gap": "0", + "support_threshold_angle": "40", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.12", + "support_top_z_distance": "0.12", + "support_bottom_z_distance": "0.12", + "support_base_pattern_spacing": "1", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "100%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "140", + "small_perimeter_speed": "120", + "outer_wall_speed": "120", + "sparse_infill_speed": "120", + "internal_solid_infill_speed": "200", + "top_surface_speed": "50", + "support_speed": "100", + "support_interface_speed": "45%", + "bridge_speed": "30", + "gap_infill_speed": "50", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "2000", + "outer_wall_acceleration": "2500", + "inner_wall_acceleration": "2500", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "3000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.34", + "initial_layer_line_width": "0.4", + "inner_wall_line_width": "0.34", + "outer_wall_line_width": "0.34", + "sparse_infill_line_width": "0.34", + "internal_solid_infill_line_width": "0.34", + "top_surface_line_width": "0.3", + "support_line_width": "0.3", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0", + "compatible_printers": [ + "Prusa XLIS 0.3 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.4.json b/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.4.json new file mode 100644 index 0000000000..3433844d31 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.4.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Speed @XLIS 0.4", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.2", + "wall_loops": "2", + "top_shell_layers": "5", + "bottom_shell_layers": "4", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "2", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.15", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "170", + "small_perimeter_speed": "170", + "outer_wall_speed": "170", + "sparse_infill_speed": "200", + "internal_solid_infill_speed": "200", + "top_surface_speed": "100", + "support_speed": "110", + "support_interface_speed": "50%", + "bridge_speed": "50", + "gap_infill_speed": "120", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "90%", + "default_acceleration": "2500", + "outer_wall_acceleration": "2500", + "inner_wall_acceleration": "3000", + "top_surface_acceleration": "1500", + "internal_solid_infill_acceleration": "4000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "top_surface_line_width": "0.42", + "support_line_width": "0.36", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.5.json b/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.5.json new file mode 100644 index 0000000000..722cbe2eb4 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.5.json @@ -0,0 +1,68 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Speed @XLIS 0.5", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.2", + "wall_loops": "2", + "top_shell_layers": "5", + "bottom_shell_layers": "4", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "2", + "infill_anchor_max": "15", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.25", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.22", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "140", + "small_perimeter_speed": "140", + "outer_wall_speed": "140", + "sparse_infill_speed": "200", + "internal_solid_infill_speed": "135", + "top_surface_speed": "70", + "support_speed": "120", + "support_interface_speed": "75%", + "bridge_speed": "40", + "gap_infill_speed": "70", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "2500", + "outer_wall_acceleration": "2500", + "inner_wall_acceleration": "3000", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "3000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.55", + "initial_layer_line_width": "0.55", + "inner_wall_line_width": "0.55", + "outer_wall_line_width": "0.55", + "sparse_infill_line_width": "0.55", + "internal_solid_infill_line_width": "0.55", + "top_surface_line_width": "0.5", + "support_line_width": "0.4", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.5 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.6.json b/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.6.json new file mode 100644 index 0000000000..7be3e19729 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm Speed @XLIS 0.6.json @@ -0,0 +1,69 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Speed @XLIS 0.6", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.2", + "wall_loops": "2", + "top_shell_layers": "5", + "bottom_shell_layers": "4", + "top_shell_thickness": "0.9", + "bottom_shell_thickness": "0.6", + "sparse_infill_density": "20%", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.25", + "support_top_z_distance": "0.22", + "support_bottom_z_distance": "0.22", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.25", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "120", + "small_perimeter_speed": "120", + "outer_wall_speed": "120", + "sparse_infill_speed": "120", + "internal_solid_infill_speed": "110", + "top_surface_speed": "70", + "support_speed": "110", + "support_interface_speed": "75%", + "bridge_speed": "40", + "gap_infill_speed": "75", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "50", + "default_acceleration": "2500", + "outer_wall_acceleration": "2500", + "inner_wall_acceleration": "3000", + "top_surface_acceleration": "1500", + "internal_solid_infill_acceleration": "3000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.68", + "initial_layer_line_width": "0.68", + "inner_wall_line_width": "0.62", + "outer_wall_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "top_surface_line_width": "0.5", + "support_line_width": "0.55", + "infill_wall_overlap": "15%", + "resolution": "0.0125", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.4.json b/resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.4.json new file mode 100644 index 0000000000..2e395bcdb6 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.4.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Structural @XLIS 0.4", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.2", + "wall_loops": "2", + "top_shell_layers": "5", + "bottom_shell_layers": "4", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "2", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.15", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "80", + "small_perimeter_speed": "45", + "outer_wall_speed": "45", + "sparse_infill_speed": "120", + "internal_solid_infill_speed": "140", + "top_surface_speed": "75", + "support_speed": "120", + "support_interface_speed": "50", + "bridge_speed": "50", + "gap_infill_speed": "65", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "90%", + "default_acceleration": "2500", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2500", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "3000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "top_surface_line_width": "0.42", + "support_line_width": "0.36", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.5.json b/resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.5.json new file mode 100644 index 0000000000..16bcfe597a --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.5.json @@ -0,0 +1,68 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Structural @XLIS 0.5", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.2", + "wall_loops": "2", + "top_shell_layers": "5", + "bottom_shell_layers": "4", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "2", + "infill_anchor_max": "15", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.25", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.22", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "80", + "small_perimeter_speed": "45", + "outer_wall_speed": "45", + "sparse_infill_speed": "200", + "internal_solid_infill_speed": "120", + "top_surface_speed": "70", + "support_speed": "75", + "support_interface_speed": "75%", + "bridge_speed": "40", + "gap_infill_speed": "70", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "2500", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2000", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "2500", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.55", + "initial_layer_line_width": "0.55", + "inner_wall_line_width": "0.55", + "outer_wall_line_width": "0.55", + "sparse_infill_line_width": "0.55", + "internal_solid_infill_line_width": "0.55", + "top_surface_line_width": "0.5", + "support_line_width": "0.4", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.5 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.6.json b/resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.6.json new file mode 100644 index 0000000000..9fb59ef780 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm Structural @XLIS 0.6.json @@ -0,0 +1,69 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Structural @XLIS 0.6", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.2", + "wall_loops": "2", + "top_shell_layers": "5", + "bottom_shell_layers": "4", + "top_shell_thickness": "0.9", + "bottom_shell_thickness": "0.6", + "sparse_infill_density": "20%", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.25", + "support_top_z_distance": "0.22", + "support_bottom_z_distance": "0.22", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.25", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "80", + "small_perimeter_speed": "45", + "outer_wall_speed": "45", + "sparse_infill_speed": "120", + "internal_solid_infill_speed": "110", + "top_surface_speed": "70", + "support_speed": "110", + "support_interface_speed": "75%", + "bridge_speed": "40", + "gap_infill_speed": "75", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "90%", + "default_acceleration": "2500", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2500", + "top_surface_acceleration": "1500", + "internal_solid_infill_acceleration": "2500", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.68", + "initial_layer_line_width": "0.68", + "inner_wall_line_width": "0.6", + "outer_wall_line_width": "0.6", + "sparse_infill_line_width": "0.6", + "internal_solid_infill_line_width": "0.6", + "top_surface_line_width": "0.5", + "support_line_width": "0.55", + "infill_wall_overlap": "15%", + "resolution": "0.0125", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.25mm Speed @XLIS 0.5.json b/resources/profiles/Prusa/process/0.25mm Speed @XLIS 0.5.json new file mode 100644 index 0000000000..888572af3b --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm Speed @XLIS 0.5.json @@ -0,0 +1,68 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.25mm Speed @XLIS 0.5", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.25", + "wall_loops": "2", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "2", + "infill_anchor_max": "15", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.25", + "support_top_z_distance": "0.25", + "support_bottom_z_distance": "0.25", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.22", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "140", + "small_perimeter_speed": "140", + "outer_wall_speed": "140", + "sparse_infill_speed": "200", + "internal_solid_infill_speed": "110", + "top_surface_speed": "70", + "support_speed": "120", + "support_interface_speed": "75%", + "bridge_speed": "40", + "gap_infill_speed": "70", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "2500", + "outer_wall_acceleration": "2500", + "inner_wall_acceleration": "3000", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "3000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.55", + "initial_layer_line_width": "0.55", + "inner_wall_line_width": "0.55", + "outer_wall_line_width": "0.55", + "sparse_infill_line_width": "0.55", + "internal_solid_infill_line_width": "0.55", + "top_surface_line_width": "0.5", + "support_line_width": "0.4", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.5 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.25mm Speed @XLIS 0.6.json b/resources/profiles/Prusa/process/0.25mm Speed @XLIS 0.6.json new file mode 100644 index 0000000000..043252449e --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm Speed @XLIS 0.6.json @@ -0,0 +1,69 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.25mm Speed @XLIS 0.6", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.25", + "wall_loops": "2", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0.9", + "bottom_shell_thickness": "0.6", + "sparse_infill_density": "20%", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.25", + "support_top_z_distance": "0.25", + "support_bottom_z_distance": "0.25", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.25", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "80", + "small_perimeter_speed": "80", + "outer_wall_speed": "80", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "90", + "top_surface_speed": "60", + "support_speed": "80", + "support_interface_speed": "75%", + "bridge_speed": "40", + "gap_infill_speed": "70", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "50", + "default_acceleration": "2500", + "outer_wall_acceleration": "2500", + "inner_wall_acceleration": "3000", + "top_surface_acceleration": "1500", + "internal_solid_infill_acceleration": "3000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.68", + "initial_layer_line_width": "0.68", + "inner_wall_line_width": "0.68", + "outer_wall_line_width": "0.68", + "sparse_infill_line_width": "0.68", + "internal_solid_infill_line_width": "0.68", + "top_surface_line_width": "0.55", + "support_line_width": "0.55", + "infill_wall_overlap": "15%", + "resolution": "0.0125", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.4.json b/resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.4.json new file mode 100644 index 0000000000..ea6a05029a --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.4.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.25mm Structural @XLIS 0.4", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.25", + "wall_loops": "2", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "2", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.15", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "80", + "small_perimeter_speed": "45", + "outer_wall_speed": "45", + "sparse_infill_speed": "120", + "internal_solid_infill_speed": "140", + "top_surface_speed": "75", + "support_speed": "120", + "support_interface_speed": "50", + "bridge_speed": "50", + "gap_infill_speed": "65", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "90%", + "default_acceleration": "2500", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2500", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "3000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "top_surface_line_width": "0.42", + "support_line_width": "0.36", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.5.json b/resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.5.json new file mode 100644 index 0000000000..ee2883faa6 --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.5.json @@ -0,0 +1,68 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.25mm Structural @XLIS 0.5", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.25", + "wall_loops": "2", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0.7", + "bottom_shell_thickness": "0.5", + "sparse_infill_density": "15%", + "infill_anchor": "2", + "infill_anchor_max": "15", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.25", + "support_top_z_distance": "0.25", + "support_bottom_z_distance": "0.25", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.22", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "80", + "small_perimeter_speed": "45", + "outer_wall_speed": "45", + "sparse_infill_speed": "200", + "internal_solid_infill_speed": "110", + "top_surface_speed": "70", + "support_speed": "75", + "support_interface_speed": "75%", + "bridge_speed": "40", + "gap_infill_speed": "70", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "80%", + "default_acceleration": "2500", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2000", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "2500", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.55", + "initial_layer_line_width": "0.55", + "inner_wall_line_width": "0.55", + "outer_wall_line_width": "0.55", + "sparse_infill_line_width": "0.55", + "internal_solid_infill_line_width": "0.55", + "top_surface_line_width": "0.5", + "support_line_width": "0.4", + "infill_wall_overlap": "15%", + "resolution": "0.008", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.5 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.6.json b/resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.6.json new file mode 100644 index 0000000000..017a21dc18 --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm Structural @XLIS 0.6.json @@ -0,0 +1,69 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.25mm Structural @XLIS 0.6", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.25", + "wall_loops": "2", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0.9", + "bottom_shell_thickness": "0.6", + "sparse_infill_density": "20%", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.25", + "support_top_z_distance": "0.25", + "support_bottom_z_distance": "0.25", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.25", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "80", + "small_perimeter_speed": "45", + "outer_wall_speed": "45", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "95", + "top_surface_speed": "70", + "support_speed": "80", + "support_interface_speed": "75%", + "bridge_speed": "40", + "gap_infill_speed": "70", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "90%", + "default_acceleration": "2500", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2500", + "top_surface_acceleration": "1500", + "internal_solid_infill_acceleration": "3000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.68", + "initial_layer_line_width": "0.68", + "inner_wall_line_width": "0.68", + "outer_wall_line_width": "0.68", + "sparse_infill_line_width": "0.68", + "internal_solid_infill_line_width": "0.68", + "top_surface_line_width": "0.55", + "support_line_width": "0.55", + "infill_wall_overlap": "15%", + "resolution": "0.0125", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.30mm Detail @XLIS 0.8.json b/resources/profiles/Prusa/process/0.30mm Detail @XLIS 0.8.json new file mode 100644 index 0000000000..83fe78840d --- /dev/null +++ b/resources/profiles/Prusa/process/0.30mm Detail @XLIS 0.8.json @@ -0,0 +1,71 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.30mm Detail @XLIS 0.8", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.3", + "wall_loops": "2", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "1.2", + "bottom_shell_thickness": "0.8", + "thick_bridges": "1", + "seam_position": "nearest", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "rectilinear", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.2", + "support_top_z_distance": "0.25", + "support_bottom_z_distance": "0.25", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.35", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "70", + "small_perimeter_speed": "45", + "outer_wall_speed": "45", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "50", + "top_surface_speed": "35", + "support_speed": "65", + "support_interface_speed": "85%", + "bridge_speed": "22", + "gap_infill_speed": "40", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "80%", + "default_acceleration": "2000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2000", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "3000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.9", + "initial_layer_line_width": "1", + "inner_wall_line_width": "0.9", + "outer_wall_line_width": "0.9", + "sparse_infill_line_width": "0.9", + "internal_solid_infill_line_width": "0.9", + "top_surface_line_width": "0.7", + "support_line_width": "0.65", + "infill_wall_overlap": "15%", + "resolution": "0.0125", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.32mm Speed @XLIS 0.6.json b/resources/profiles/Prusa/process/0.32mm Speed @XLIS 0.6.json new file mode 100644 index 0000000000..207b38b504 --- /dev/null +++ b/resources/profiles/Prusa/process/0.32mm Speed @XLIS 0.6.json @@ -0,0 +1,69 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.32mm Speed @XLIS 0.6", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.32", + "wall_loops": "2", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0.9", + "bottom_shell_thickness": "0.6", + "sparse_infill_density": "20%", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.25", + "support_top_z_distance": "0.25", + "support_bottom_z_distance": "0.25", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.25", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "70", + "small_perimeter_speed": "70", + "outer_wall_speed": "70", + "sparse_infill_speed": "100", + "internal_solid_infill_speed": "70", + "top_surface_speed": "60", + "support_speed": "70", + "support_interface_speed": "75%", + "bridge_speed": "40", + "gap_infill_speed": "65", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "50", + "default_acceleration": "2500", + "outer_wall_acceleration": "2500", + "inner_wall_acceleration": "3000", + "top_surface_acceleration": "1500", + "internal_solid_infill_acceleration": "3000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.68", + "initial_layer_line_width": "0.68", + "inner_wall_line_width": "0.68", + "outer_wall_line_width": "0.68", + "sparse_infill_line_width": "0.68", + "internal_solid_infill_line_width": "0.68", + "top_surface_line_width": "0.55", + "support_line_width": "0.55", + "infill_wall_overlap": "15%", + "resolution": "0.0125", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.32mm Structural @XLIS 0.6.json b/resources/profiles/Prusa/process/0.32mm Structural @XLIS 0.6.json new file mode 100644 index 0000000000..f9c92bcae8 --- /dev/null +++ b/resources/profiles/Prusa/process/0.32mm Structural @XLIS 0.6.json @@ -0,0 +1,69 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.32mm Structural @XLIS 0.6", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.32", + "wall_loops": "2", + "top_shell_layers": "5", + "bottom_shell_layers": "4", + "top_shell_thickness": "0.9", + "bottom_shell_thickness": "0.6", + "sparse_infill_density": "20%", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.25", + "support_top_z_distance": "0.25", + "support_bottom_z_distance": "0.25", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.25", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "70", + "small_perimeter_speed": "45", + "outer_wall_speed": "45", + "sparse_infill_speed": "70", + "internal_solid_infill_speed": "70", + "top_surface_speed": "70", + "support_speed": "80", + "support_interface_speed": "75%", + "bridge_speed": "40", + "gap_infill_speed": "70", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "90%", + "default_acceleration": "2500", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2500", + "top_surface_acceleration": "1500", + "internal_solid_infill_acceleration": "3000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1500", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.68", + "initial_layer_line_width": "0.68", + "inner_wall_line_width": "0.68", + "outer_wall_line_width": "0.68", + "sparse_infill_line_width": "0.68", + "internal_solid_infill_line_width": "0.68", + "top_surface_line_width": "0.55", + "support_line_width": "0.55", + "infill_wall_overlap": "15%", + "resolution": "0.0125", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.40mm Quality @XLIS 0.8.json b/resources/profiles/Prusa/process/0.40mm Quality @XLIS 0.8.json new file mode 100644 index 0000000000..e5908f1d4a --- /dev/null +++ b/resources/profiles/Prusa/process/0.40mm Quality @XLIS 0.8.json @@ -0,0 +1,71 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.40mm Quality @XLIS 0.8", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.4", + "wall_loops": "2", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "1.2", + "bottom_shell_thickness": "0.8", + "thick_bridges": "1", + "seam_position": "nearest", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "rectilinear", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.2", + "support_top_z_distance": "0.25", + "support_bottom_z_distance": "0.25", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.35", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "50", + "small_perimeter_speed": "45", + "outer_wall_speed": "45", + "sparse_infill_speed": "90", + "internal_solid_infill_speed": "45", + "top_surface_speed": "35", + "support_speed": "50", + "support_interface_speed": "85%", + "bridge_speed": "22", + "gap_infill_speed": "35", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "80%", + "default_acceleration": "2000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2000", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "3000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.9", + "initial_layer_line_width": "1", + "inner_wall_line_width": "0.9", + "outer_wall_line_width": "0.9", + "sparse_infill_line_width": "0.9", + "internal_solid_infill_line_width": "0.9", + "top_surface_line_width": "0.75", + "support_line_width": "0.65", + "infill_wall_overlap": "15%", + "resolution": "0.0125", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/0.55mm Draft @XLIS 0.8.json b/resources/profiles/Prusa/process/0.55mm Draft @XLIS 0.8.json new file mode 100644 index 0000000000..63e7aef354 --- /dev/null +++ b/resources/profiles/Prusa/process/0.55mm Draft @XLIS 0.8.json @@ -0,0 +1,71 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.55mm Draft @XLIS 0.8", + "from": "system", + "instantiation": "true", + "inherits": "process_common_xl", + "inital_layer_height": "0.2", + "layer_height": "0.55", + "wall_loops": "2", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "1.2", + "bottom_shell_thickness": "0.8", + "thick_bridges": "1", + "seam_position": "nearest", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "rectilinear", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "brim_object_gap": "0.1", + "support_threshold_angle": "40", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3.5", + "raft_contact_distance": "0.2", + "support_top_z_distance": "0.25", + "support_bottom_z_distance": "0.25", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_spacing": "0.35", + "support_object_xy_distance": "80%", + "tree_support_bramch_diameter_angle": "5", + "tree_support_tip_diameter": "0.8", + "inner_wall_speed": "40", + "small_perimeter_speed": "35", + "outer_wall_speed": "35", + "sparse_infill_speed": "55", + "internal_solid_infill_speed": "35", + "top_surface_speed": "30", + "support_speed": "35", + "support_interface_speed": "85%", + "bridge_speed": "22", + "gap_infill_speed": "30", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "80%", + "default_acceleration": "2000", + "outer_wall_acceleration": "1500", + "inner_wall_acceleration": "2000", + "top_surface_acceleration": "1000", + "internal_solid_infill_acceleration": "3000", + "sparse_infill_acceleration": "4000", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "500", + "travel_acceleration": "5000", + "line_width": "0.9", + "initial_layer_line_width": "1", + "inner_wall_line_width": "1", + "outer_wall_line_width": "1", + "sparse_infill_line_width": "0.9", + "internal_solid_infill_line_width": "0.9", + "top_surface_line_width": "0.75", + "support_line_width": "0.65", + "infill_wall_overlap": "15%", + "resolution": "0.0125", + "elefant_foot_compensation": "0.2", + "compatible_printers": [ + "Prusa XLIS 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Prusa/process/fdm_process_common.json b/resources/profiles/Prusa/process/fdm_process_common.json index 1727668cde..9c2ee56fc2 100644 --- a/resources/profiles/Prusa/process/fdm_process_common.json +++ b/resources/profiles/Prusa/process/fdm_process_common.json @@ -57,7 +57,8 @@ "raft_layers": "0", "seam_position": "aligned", "skirt_distance": "2", - "skirt_height": "1", + "skirt_height": "3", + "min_skirt_length": "4", "skirt_loops": "0", "minimum_sparse_infill_area": "15", "spiral_mode": "0", diff --git a/resources/profiles/Prusa/process/process_common_xl.json b/resources/profiles/Prusa/process/process_common_xl.json new file mode 100644 index 0000000000..43570c21b8 --- /dev/null +++ b/resources/profiles/Prusa/process/process_common_xl.json @@ -0,0 +1,96 @@ +{ + "type": "process", + "name": "process_common_xl", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_common", + "infill_combination": "1", + "infill_anchor": "2", + "wall_loops": "2", + "top_shell_layers": "5", + "bottom_shell_layers": "4", + "top_shell_thickness": "0.7", + "detect_overhang_wall": "1", + "wall_generator": "arachne", + "gap_fill_target": "everywhere", + "bottom_shell_thickness": "0.5", + "infill_anchor_max": "12", + "sparse_infill_pattern": "grid", + "sparse_infill_density": "15%", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_thickness": "0.3", + "skirt_height": "3", + "brim_type": "outer_only", + "brim_width": "0", + "support_threshold_angle": "45", + "raft_first_layer_density": "80%", + "raft_first_layer_expansion": "3", + "raft_contact_distance": "0.2", + "support_type": "tree(auto)", + "support_style": "organic", + "support_base_pattern_spacing": "2", + "support_interface_top_layers": "5", + "support_interface_bottom_layers": "0", + "support_interface_pattern": "rectilinear", + "support_interface_spacing": "0.2", + "support_object_xy_distance": "80%", + "tree_support_branch_angle_organic": "40", + "tree_support_angle_slow": "30", + "tree_support_branch_diameter_organic": "2", + "tree_support_bramch_diameter_angle": "3", + "tree_support_branch_diameter_double_wall": "3", + "tree_support_tip_diameter": "0.6", + "tree_support_top_rate": "30%", + "tree_support_branch_distance_organic": "1", + "initial_layer_speed": "25", + "initial_layer_infill_speed": "25", + "outer_wall_speed": "70", + "inner_wall_speed": "90", + "small_perimeter_speed": "40", + "sparse_infill_speed": "200", + "top_surface_speed": "40", + "internal_solid_infill_speed": "140", + "support_speed": "60", + "support_interface_speed": "70%", + "bridge_speed": "25", + "gap_infill_speed": "45", + "ironing_speed": "15", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "enable_overhang_speed": "1", + "overhang_1_4_speed": "15", + "overhang_2_4_speed": "15", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "25", + "travel_speed": "400", + "default_acceleration": "1250", + "outer_wall_acceleration": "1000", + "inner_wall_acceleration": "1200", + "top_surface_acceleration": "800", + "internal_solid_infill_acceleration": "2000", + "sparse_infill_acceleration": "3000", + "bridge_acceleration": "1000", + "initial_layer_acceleration": "600", + "travel_acceleration": "0", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "outer_wall_line_width": "0.45", + "inner_wall_line_width": "0.45", + "top_surface_line_width": "0.42", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "support_line_width": "0.37", + "infill_wall_overlap": "10%", + "slice_closing_radius": "0.049", + "resolution": "0.0125", + "enable_arc_fitting": "1", + "elefant_foot_compensation": "0.2", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wall_distribution_count": "1", + "min_bead_width": "85%", + "min_feature_size": "25%", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{print_time}.gcode", + "gcode_label_objects": "1" +} \ No newline at end of file diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index f31b1269f3..df166a49be 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -1956,13 +1956,16 @@ def = this->add("filament_loading_speed", coFloats); def->enum_values.push_back("PETG"); def->enum_values.push_back("TPU"); def->enum_values.push_back("PC"); + def->enum_values.push_back("PC-CF"); def->enum_values.push_back("PA"); def->enum_values.push_back("PA-CF"); def->enum_values.push_back("PA6-CF"); + def->enum_values.push_back("PA11-CF"); def->enum_values.push_back("PLA-CF"); def->enum_values.push_back("PET-CF"); def->enum_values.push_back("PETG-CF"); def->enum_values.push_back("PVA"); + def->enum_values.push_back("PVB"); def->enum_values.push_back("HIPS"); def->enum_values.push_back("PLA-AERO"); def->enum_values.push_back("PPS"); diff --git a/src/slic3r/GUI/CreatePresetsDialog.cpp b/src/slic3r/GUI/CreatePresetsDialog.cpp index adfb9c229f..c277b47205 100644 --- a/src/slic3r/GUI/CreatePresetsDialog.cpp +++ b/src/slic3r/GUI/CreatePresetsDialog.cpp @@ -59,9 +59,9 @@ static const std::vector filament_vendors = "Voxelab", "VOXELPLA", "YOOPAI", "Yousu", "Ziro", "Zyltech"}; -static const std::vector filament_types = {"PLA", "PLA+", "PLA Tough", "PETG", "ABS", "ASA", "FLEX", "HIPS", "PA", "PACF", - "NYLON", "PVA", "PC", "PCABS", "PCTG", "PCCF", "PHA", "PP", "PEI", "PET", "PETG", - "PETGCF", "PTBA", "PTBA90A", "PEEK", "TPU93A", "TPU75D", "TPU", "TPU92A", "TPU98A", "Misc", +static const std::vector filament_types = {"PLA", "rPLA", "PLA+", "PLA Tough", "PETG", "ABS", "ASA", "FLEX", "HIPS", "PA", "PACF", + "NYLON", "PVA", "PVB", "PC", "PCABS", "PCTG", "PCCF", "PHA", "PP", "PEI", "PET", "PETG", + "PETGCF", "PTBA", "PTBA90A", "PEEK", "TPU93A", "TPU75D", "TPU", "TPU92A", "TPU98A", "Misc", "TPE", "GLAZE", "Nylon", "CPE", "METAL", "ABST", "Carbon Fiber"}; static const std::vector printer_vendors =