diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot index 26aa1b30e3..f7e02a7636 100644 --- a/localization/i18n/OrcaSlicer.pot +++ b/localization/i18n/OrcaSlicer.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-09-30 10:27+0800\n" +"POT-Creation-Date: 2023-10-10 11:06+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -2917,7 +2917,7 @@ msgstr "" msgid "Size:" msgstr "" -#, possible-c-format, possible-boost-format +#, possible-boost-format msgid "" "Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " "separate the conflicted objects farther (%s <-> %s)." @@ -4142,6 +4142,24 @@ msgstr "" msgid "Printer settings" msgstr "" +msgid "Remove current plate (if not last one)" +msgstr "" + +msgid "Auto orient objects on current plate" +msgstr "" + +msgid "Arrange objects on current plate" +msgstr "" + +msgid "Unlock current plate" +msgstr "" + +msgid "Lock current plate" +msgstr "" + +msgid "Customize current plate" +msgstr "" + msgid "Untitled" msgstr "" @@ -5421,8 +5439,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "Line width" @@ -6769,6 +6787,19 @@ msgid "" "effect" msgstr "" +msgid "Elephant foot compensation layers" +msgstr "" + +msgid "" +"The number of layers on which the elephant foot compensation will be active. " +"The first layer will be shrunk by the elephant foot compensation value, then " +"the next layers will be linearly shrunk less, up to the layer indicated by " +"this value." +msgstr "" + +msgid "layers" +msgstr "" + msgid "" "Slicing height for each layer. Smaller layer height means more accurate and " "more printing time" @@ -7234,9 +7265,6 @@ msgid "" "layer used to be closed to get better build plate adhesion" msgstr "" -msgid "layers" -msgstr "" - msgid "Don't support bridges" msgstr "" @@ -7882,10 +7910,10 @@ msgstr "" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" @@ -8171,6 +8199,9 @@ msgstr "" msgid "Ironing Pattern" msgstr "" +msgid "The pattern that will be used when ironing" +msgstr "" + msgid "Ironing flow" msgstr "" @@ -8191,6 +8222,14 @@ msgstr "" msgid "Print speed of ironing lines" msgstr "" +msgid "Ironing angle" +msgstr "" + +msgid "" +"The angle ironing is done at. A negative number disables this function and " +"uses the default method." +msgstr "" + msgid "This gcode part is inserted at every layer change after lift z" msgstr "" @@ -9429,6 +9468,34 @@ msgid "" "assembling issue" msgstr "" +msgid "Convert holes to polyholes" +msgstr "" + +msgid "" +"Search for almost-circular holes that span more than one layer and convert " +"the geometry to polyholes. Use the nozzle size and the (biggest) diameter to " +"compute the polyhole.\n" +"See http://hydraraptor.blogspot.com/2011/02/polyholes.html" +msgstr "" + +msgid "Polyhole detection margin" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "" +"Maximum defection of a point to the estimated radius of the circle.\n" +"As cylinders are often exported as triangles of varying size, points may not " +"be on the circle circumference. This setting allows you some leway to " +"broaden the detection.\n" +"In mm or in % of the radius." +msgstr "" + +msgid "Polyhole twist" +msgstr "" + +msgid "Rotate the polyhole every layer." +msgstr "" + msgid "G-code thumbnails" msgstr "" diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po index 393cc14512..af41e95647 100644 --- a/localization/i18n/de/OrcaSlicer_de.po +++ b/localization/i18n/de/OrcaSlicer_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-03 14:55+0200\n" +"POT-Creation-Date: 2023-10-10 11:06+0200\n" "PO-Revision-Date: \n" "Last-Translator: Heiko Liebscher \n" "Language-Team: \n" @@ -671,7 +671,8 @@ msgid "Choose one file (3mf):" msgstr "Wählen sie eine Datei (3mf):" msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" -msgstr "Wählen sie eine oder mehrere Dateien (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" +msgstr "" +"Wählen sie eine oder mehrere Dateien (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "Wählen sie eine oder mehrere Dateien (3mf/step/stl/svg/obj/amf):" @@ -1545,7 +1546,7 @@ msgid "?" msgstr "?" msgid "/" -msgstr "" +msgstr "/" msgid "Empty" msgstr "Leer" @@ -2720,7 +2721,8 @@ msgid "Paused due to AMS lost" msgstr "Pausiert aufgrund eines AMS-Verlustes" msgid "Paused due to low speed of the heat break fan" -msgstr "Pausiert aufgrund einer zu niedrigen Geschwindigkeit des Heatbreak-Lüfters" +msgstr "" +"Pausiert aufgrund einer zu niedrigen Geschwindigkeit des Heatbreak-Lüfters" msgid "Paused due to chamber temperature control error" msgstr "Pausiert aufgrund eines Fehlers bei der Kammer-Temperaturregelung" @@ -4217,8 +4219,8 @@ msgid "" "\n" " error code: " msgstr "" -"Ihr Kommentarergebnis kann aus einigen Gründen nicht hochgeladen werden. " -"Wie folgt:\n" +"Ihr Kommentarergebnis kann aus einigen Gründen nicht hochgeladen werden. Wie " +"folgt:\n" "\n" " Fehlercode: " @@ -4492,6 +4494,24 @@ msgstr "Filamenteinstellungen" msgid "Printer settings" msgstr "Drucker-Einstellungen" +msgid "Remove current plate (if not last one)" +msgstr "entferne aktuelle Platte (wenn nicht die letzte)" + +msgid "Auto orient objects on current plate" +msgstr "Automatische Ausrichtung der Objekte auf der aktuellen Platte" + +msgid "Arrange objects on current plate" +msgstr "Ausrichtung der Objekte auf der aktuellen Platte" + +msgid "Unlock current plate" +msgstr "Entsperre aktuelle Platte " + +msgid "Lock current plate" +msgstr "Speere aktuelle Platte" + +msgid "Customize current plate" +msgstr "Aktuelle Platte anpassen" + msgid "Untitled" msgstr "Unbenannt" @@ -5547,7 +5567,8 @@ msgid "Flow Dynamics Calibration" msgstr "Dynamische Flusskalibrierung" msgid "Click here if you can't connect to the printer" -msgstr "Klicken Sie hier, wenn Sie keine Verbindung zum Drucker herstellen können" +msgstr "" +"Klicken Sie hier, wenn Sie keine Verbindung zum Drucker herstellen können" msgid "send completed" msgstr "Senden abgeschlossen" @@ -6124,8 +6145,8 @@ msgid "" "High Temp Plate" msgstr "" "Dies ist die Betttemperatur, wenn die glatte PEI-Platte installiert ist. Ein " -"Wert von 0 bedeutet, dass das Filament auf der glatten PEI-/Hochtemperatur Platte nicht " -"unterstützt wird." +"Wert von 0 bedeutet, dass das Filament auf der glatten PEI-/Hochtemperatur " +"Platte nicht unterstützt wird." msgid "Textured PEI Plate" msgstr "Texturierte PEI-Platte" @@ -7314,8 +7335,7 @@ msgstr "" msgid "Variable layer height is not supported with Organic supports." msgstr "" -"Variable Schichthöhe wird nicht mit organischen Stützstrukturen " -"unterstützt." +"Variable Schichthöhe wird nicht mit organischen Stützstrukturen unterstützt." msgid "The prime tower is not supported in \"By object\" print." msgstr "Der Reinigungsturm wird im \"Nach Objekt\"-Druck nicht unterstützt." @@ -8804,7 +8824,6 @@ msgid "" msgstr "" "Klipper's max_accel_to_decel wird auf diesen %% der Beschleunigung verändert" - #, c-format, boost-format msgid "%%" msgstr "%%" @@ -9055,7 +9074,8 @@ msgid "Best object position" msgstr "Beste Objektposition" msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." -msgstr "Beste automatische Positionierung im Bereich [0,1] bezogen auf das Bett." +msgstr "" +"Beste automatische Positionierung im Bereich [0,1] bezogen auf das Bett." msgid "Enable this option if machine has auxiliary part cooling fan" msgstr "" @@ -9127,7 +9147,8 @@ msgid "Support air filtration" msgstr "Luftfilterung unterstützen" msgid "Enable this if printer support air filtration" -msgstr "Aktivieren Sie diese Option, wenn der Drucker die Luftfilterung unterstützt" +msgstr "" +"Aktivieren Sie diese Option, wenn der Drucker die Luftfilterung unterstützt" msgid "G-code flavor" msgstr "G-Code Typ" @@ -9249,6 +9270,9 @@ msgstr "Alle soliden Schichten" msgid "Ironing Pattern" msgstr "Bügelmuster" +msgid "The pattern that will be used when ironing" +msgstr "Das Muster, das beim Glätten verwendet wird" + msgid "Ironing flow" msgstr "Materialmenge" @@ -9272,6 +9296,16 @@ msgstr "Geschwindigkeit beim Glätten" msgid "Print speed of ironing lines" msgstr "Druckgeschwindigkeit der Glättlinien" +msgid "Ironing angle" +msgstr "Glättwinkel" + +msgid "" +"The angle ironing is done at. A negative number disables this function and " +"uses the default method." +msgstr "" +"Der Winkel, in dem das Glätten durchgeführt wird. Eine negative Zahl " +"deaktiviert diese Funktion und verwendet die Standardmethode." + msgid "This gcode part is inserted at every layer change after lift z" msgstr "" "Dieser G-Code wird bei jedem Schichtwechsel nach dem anheben von Z eingefügt." @@ -10584,12 +10618,13 @@ msgid "" "recommended" msgstr "" "Eine höhere Druckraumtemperatur kann das Verziehen unterdrücken oder " -"reduzieren und möglicherweise zu einer höheren Zwischenschichtbindungsfestig" -"keit für Hochtemperaturmaterialien wie ABS, ASA, PC, PA und so weiter führen." -" Gleichzeitig wird die Luftfiltration von ABS und ASA schlechter. Für PLA, " -"PETG, TPU, PVA und andere Materialien mit niedriger Temperatur sollte die " -"tatsächliche Druckraumtemperatur nicht hoch sein, um Verstopfungen zu " -"vermeiden, daher wird 0, was für das Ausschalten steht, dringend empfohlen." +"reduzieren und möglicherweise zu einer höheren " +"Zwischenschichtbindungsfestigkeit für Hochtemperaturmaterialien wie ABS, " +"ASA, PC, PA und so weiter führen. Gleichzeitig wird die Luftfiltration von " +"ABS und ASA schlechter. Für PLA, PETG, TPU, PVA und andere Materialien mit " +"niedriger Temperatur sollte die tatsächliche Druckraumtemperatur nicht hoch " +"sein, um Verstopfungen zu vermeiden, daher wird 0, was für das Ausschalten " +"steht, dringend empfohlen." msgid "Nozzle temperature for layers after the initial one" msgstr "Düsentemperatur nach der ersten Schicht" @@ -10823,6 +10858,44 @@ msgstr "" "Werte verkleinern Konturen. Diese Funktion wird verwendet, um die Größe " "geringfügig anzupassen, wenn Objekte Probleme bei der Montage haben." +msgid "Convert holes to polyholes" +msgstr "Konvertiere Löcher zu Polyholes" + +msgid "" +"Search for almost-circular holes that span more than one layer and convert " +"the geometry to polyholes. Use the nozzle size and the (biggest) diameter to " +"compute the polyhole.\n" +"See http://hydraraptor.blogspot.com/2011/02/polyholes.html" +msgstr "" +"Suchen Sie nach fast kreisförmigen Löchern, die sich über mehr als eine " +"Schicht erstrecken, und konvertieren Sie die Geometrie in Polyholes. " +"Verwenden Sie die Düsengröße und den (größten) Durchmesser, um das Polyhole " +"zu berechnen.\n" +"Siehe http://hydraraptor.blogspot.com/2011/02/polyholes.html" + +msgid "Polyhole detection margin" +msgstr "ab Wert erkenne Polyhole" + +#, fuzzy, c-format, boost-format +msgid "" +"Maximum defection of a point to the estimated radius of the circle.\n" +"As cylinders are often exported as triangles of varying size, points may not " +"be on the circle circumference. This setting allows you some leway to " +"broaden the detection.\n" +"In mm or in % of the radius." +msgstr "" +"Maximale Abweichung eines Punktes vom geschätzten Radius des Kreises.\n" +"Da Zylinder oft als Dreiecke unterschiedlicher Größe exportiert werden, " +"liegen die Punkte möglicherweise nicht auf dem Umfang des Kreises. Diese " +"Einstellung ermöglicht es Ihnen, die Erkennung zu erweitern.\n" +"In mm oder in % des Radius." + +msgid "Polyhole twist" +msgstr "Polyhole verdrehen" + +msgid "Rotate the polyhole every layer." +msgstr "Polyhole in jeder Schicht drehen." + msgid "G-code thumbnails" msgstr "G-Code Vorschaubilder" @@ -11835,7 +11908,7 @@ msgid "0.5" msgstr "0,5" msgid "0.005" -msgstr "0,005" +msgstr "0,005" msgid "The nozzle diameter has been synchronized from the printer Settings" msgstr "Der Düsendurchmesser wurde aus den Druckereinstellungen synchronisiert"