Merge branch 'main' into dev/gizmo

deps/CMakeLists.txt

@@ -133,6 +133,7 @@ else()
         ${_gen}
         CMAKE_ARGS
             -DCMAKE_INSTALL_PREFIX:STRING=${DESTDIR}/usr/local
+            -DCMAKE_PREFIX_PATH:STRING=${DESTDIR}/usr/local
             -DBUILD_SHARED_LIBS:BOOL=OFF
             ${_cmake_osx_arch}
             "${_configs_line}"

deps/MPFR/MPFR.cmake

@@ -30,7 +30,8 @@ else ()
         URL_HASH SHA256=cf4f4b2d80abb79e820e78c8077b6725bbbb4e8f41896783c899087be0e94068
         DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/MPFR
         BUILD_IN_SOURCE ON
-        CONFIGURE_COMMAND env "CFLAGS=${_gmp_ccflags}" "CXXFLAGS=${_gmp_ccflags}" ./configure ${_cross_compile_arg} --prefix=${DESTDIR}/usr/local --enable-shared=no --enable-static=yes --with-gmp=${DESTDIR}/usr/local ${_gmp_build_tgt}
+        CONFIGURE_COMMAND autoreconf -f -i && 
+                          env "CFLAGS=${_gmp_ccflags}" "CXXFLAGS=${_gmp_ccflags}" ./configure ${_cross_compile_arg} --prefix=${DESTDIR}/usr/local --enable-shared=no --enable-static=yes --with-gmp=${DESTDIR}/usr/local ${_gmp_build_tgt}
         BUILD_COMMAND make -j
         INSTALL_COMMAND make install
         DEPENDS dep_GMP

doc/Chamber-temperature.md

@@ -21,7 +21,7 @@ Bellow is a reference configuration for Klipper.
 [heater_generic chamber_heater]
 heater_pin:PB10
 max_power:1.0
-# Note: here the temperature sensor should be the sensor you are using for chamber temperature, not the PTC sensor
+# Orca note: here the temperature sensor should be the sensor you are using for chamber temperature, not the PTC sensor
 sensor_type:NTC 100K MGB18-104F39050L32
 sensor_pin:PA1
 control = pid
@@ -43,6 +43,8 @@ gcode:
         M117 Chamber heating cancelled
     {% else %}
         SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s}
+        # Orca: uncomment the following line if you want to use heat bed to assist chamber heating
+        # M140 S100
         TEMPERATURE_WAIT SENSOR="heater_generic chamber_heater" MINIMUM={s-1} MAXIMUM={s+1}
         M117 Chamber at target temperature
     {% endif %}

resources/profiles/Creality/machine/Creality K1 Max.json

@@ -8,5 +8,5 @@
     "bed_model": "creality_k1max_buildplate_model.stl",
     "bed_texture": "creality_k1max_buildplate_texture.png",
     "hotend_model": "",
-    "default_materials": "Creality Generic PLA @0.4 nozzle;Creality HF Generic PLA @0.4 nozzle;Creality HF Generic Speed PLA @0.4 nozzle;Creality Generic PETG @0.4 nozzle;Creality Generic TPU @0.4 nozzle;Creality Generic ABS @0.4 nozzle;Creality Generic PLA @0.6 nozzle;Creality HF Generic PLA @0.6 nozzle;Creality HF Generic Speed PLA @0.6 nozzle;Creality Generic PETG @0.6 nozzle;Creality Generic TPU @0.6 nozzle;Creality Generic ABS @0.6 nozzle;Creality Generic PLA @0.8 nozzle;Creality HF Generic PLA @0.8 nozzle;Creality HF Generic Speed PLA @0.8 nozzle;Creality Generic PETG @0.8 nozzle;Creality Generic TPU @0.8 nozzle;Creality Generic ABS @0.8 nozzle"
+    "default_materials": "Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PETG;Creality Generic TPU;Creality Generic ABS"
 }

resources/profiles/Creality/machine/Creality K1.json

@@ -8,5 +8,5 @@
     "bed_model": "creality_k1_buildplate_model.stl",
     "bed_texture": "creality_k1_buildplate_texture.png",
     "hotend_model": "",
-    "default_materials": "Creality Generic PLA @0.4 nozzle;Creality HF Generic PLA @0.4 nozzle;Creality HF Generic Speed PLA @0.4 nozzle;Creality Generic PETG @0.4 nozzle;Creality Generic TPU @0.4 nozzle;Creality Generic ABS @0.4 nozzle;Creality Generic PLA @0.6 nozzle;Creality HF Generic PLA @0.6 nozzle;Creality HF Generic Speed PLA @0.6 nozzle;Creality Generic PETG @0.6 nozzle;Creality Generic TPU @0.6 nozzle;Creality Generic ABS @0.6 nozzle;Creality Generic PLA @0.8 nozzle;Creality HF Generic PLA @0.8 nozzle;Creality HF Generic Speed PLA @0.8 nozzle;Creality Generic PETG @0.8 nozzle;Creality Generic TPU @0.8 nozzle;Creality Generic ABS @0.8 nozzle"
+    "default_materials": "Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PETG;Creality Generic TPU;Creality Generic ABS"
 }

resources/profiles/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json

@@ -49,7 +49,7 @@
     "ironing_spacing": "0.15",
     "ironing_speed": "100",
     "ironing_type": "no ironing",
-    "layer_height": "0.2",
+    "layer_height": "0.24",
     "reduce_infill_retraction": "1",
     "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
     "detect_overhang_wall": "1",

resources/profiles/Flashforge/process/fdm_process_flashforge_0.20.json

@@ -10,7 +10,6 @@
   "internal_solid_infill_speed": "250",
   "gap_infill_speed": "200",
   "sparse_infill_speed": "270",
-  "print_flow_ratio": "0.98",
   "small_perimeter_speed": "50%",
   "overhang_speed_classic": "0",
   "internal_bridge_speed": "50",

resources/profiles/Prusa.json

@@ -30,6 +30,10 @@
             "name": "process_common_mk3",
             "sub_path": "process/process_common_mk3.json"
         },
+        {
+            "name": "0.20mm Standard @MINI",
+            "sub_path": "process/0.20mm Standard @MINI.json"
+        },
         {
             "name": "0.05mm UltraDetail @MK3S",
             "sub_path": "process/0.05mm UltraDetail @MK3S.json"

resources/profiles/Prusa/process/fdm_process_common.json

@@ -37,7 +37,7 @@
     "ironing_speed": "30",
     "ironing_type": "no ironing",
     "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode",
     "detect_overhang_wall": "1",
     "overhang_1_4_speed": "0",
     "overhang_2_4_speed": "50",

resources/profiles/Prusa/process/process_common_mk3.json

@@ -21,7 +21,6 @@
   "enable_support": "0",
   "enforce_support_layers": "0",
   "extra_perimeters_on_overhangs": "0",
-  "filename_format": "{input_filename_base}_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode",
   "fuzzy_skin": "none",
   "fuzzy_skin_point_distance": "0.8",
   "fuzzy_skin_thickness": "0.3",