diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json index c004b1c4ca..5c8c2b73b6 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json @@ -32,8 +32,8 @@ "2500" ], "machine_max_acceleration_retracting": [ - "2500", - "2500" + "500", + "500" ], "machine_max_acceleration_travel": [ "2500", @@ -102,7 +102,7 @@ "1" ], "retraction_speed": [ - "30" + "40" ], "deretraction_speed": [ "30" @@ -114,10 +114,10 @@ "default_filament_profile": [ "Creality Generic PLA @Ender-3V3-all" ], - "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "scan_first_layer": "0", "disable_m73": "1", "thumbnails": [ ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json index 532c2b1bfe..15ddb3e240 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json @@ -32,8 +32,8 @@ "2500" ], "machine_max_acceleration_retracting": [ - "2500", - "2500" + "500", + "500" ], "machine_max_acceleration_travel": [ "2500", @@ -102,7 +102,7 @@ "1" ], "retraction_speed": [ - "30" + "40" ], "deretraction_speed": [ "30" @@ -114,10 +114,10 @@ "default_filament_profile": [ "Creality Generic PLA @Ender-3V3-all" ], - "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "scan_first_layer": "0", "disable_m73": "1", "thumbnails": [ ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json index f8f186ad43..ccc53b8c90 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json @@ -32,8 +32,8 @@ "2500" ], "machine_max_acceleration_retracting": [ - "2500", - "2500" + "500", + "500" ], "machine_max_acceleration_travel": [ "2500", @@ -102,7 +102,7 @@ "1" ], "retraction_speed": [ - "30" + "40" ], "deretraction_speed": [ "30" @@ -114,10 +114,10 @@ "default_filament_profile": [ "Creality Generic PLA @Ender-3V3-all" ], - "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "scan_first_layer": "0", "disable_m73": "1", "thumbnails": [ ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json index 036ea052e3..f5e565f0cd 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json @@ -32,8 +32,8 @@ "2500" ], "machine_max_acceleration_retracting": [ - "2500", - "2500" + "500", + "500" ], "machine_max_acceleration_travel": [ "2500", @@ -102,7 +102,7 @@ "1" ], "retraction_speed": [ - "30" + "40" ], "deretraction_speed": [ "30" @@ -114,10 +114,10 @@ "default_filament_profile": [ "Creality Generic PLA @Ender-3V3-all" ], - "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "scan_first_layer": "0", "disable_m73": "1", "thumbnails": [ ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json index 49c2731f11..f4dc4ea367 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.2 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json index 6193b866f6..229bccb94b 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.4 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json index 155366410f..a1e2e3e46c 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.6 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json index e5ac797e01..30a8b1627a 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.8 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json index d2f8ed8eef..21823a3011 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.2 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json index 9c5884cf05..369b0a1a4a 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.4 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json index f6dab37b93..9075f1e446 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.6 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json index f0989462d4..cc50cdfef3 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.8 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json index b289cfe41a..7d8f89a63f 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.2 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json index 55bf46c031..73b1636de4 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.4 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json index d55e0c5059..a21af6c10a 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.6 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json index 84e860b5d9..e096287f0f 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.8 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json index ad47ef425f..20add5298d 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.2 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json index 4883e507ac..83e2f9d4e8 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.4 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json index 5a8332d664..9399833fed 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.6 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json index 597b70e6f1..9953e95710 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.8 nozzle" ] -} \ No newline at end of file +}