From 513335b16bf05878743b3be478bafeada4f8b04f Mon Sep 17 00:00:00 2001 From: Dima Buzdyk <46728448+buzzhuzz@users.noreply.github.com> Date: Sat, 18 May 2024 18:48:16 +0500 Subject: [PATCH] e3v3se profile updates (#5339) * e3v3se: remove jerk settings from processes Remove jerk settings from Ender3 V3 SE processes to prevent emission of M205 into gcode. This is due to E3 V3 SE does not use jerk, but has junction deviation enabled instead. Those two modes are mutually exclusive according to marlin configuration page: https://marlinfw.org/docs/configuration/configuration.html#default-acceleration- https://marlinfw.org/docs/configuration/configuration.html#junction-deviation- Based on M503 output, E3V3SE hase junction deviation enabled: echo:; Advanced: B S T J echo: M205 B20000.00 S0.00 T0.00 J0.10 "M205" emitted into gcode is useless since setting jerk settings via "M205 Xn Yn Zn" does not have any effect on the stock V3 SE firmware. * e3v3se: update machine retraction settings Set retraction speed to 40 mm/s as recommended by Creality Source: https://wiki.creality.com/en/ender-series/ender-3-v3-se/quick-start-guide/user-manual Set retraction acceleration to 500 mm/s2 to prevent extruder clicking on retraction. * e3v3se: update start gcode * Set and wait for bed temperature to stabilize prior to homing. Bed mesh calibration is done with the bed temp set to 60C. Performing G28 with bed at room temperature will not compensate for thermal deformation introduced by heated bed if there are any. * Remove explicit mesh levelling enable (M420). Creality FW auto enables M420 once homing (G28) is complete: "M420 S1 Z10.00" --- .../machine/Creality Ender-3 V3 SE 0.2 nozzle.json | 10 +++++----- .../machine/Creality Ender-3 V3 SE 0.4 nozzle.json | 10 +++++----- .../machine/Creality Ender-3 V3 SE 0.6 nozzle.json | 10 +++++----- .../machine/Creality Ender-3 V3 SE 0.8 nozzle.json | 10 +++++----- .../process/0.12mm Fine @Creality Ender3V3SE 0.2.json | 9 +-------- .../process/0.12mm Fine @Creality Ender3V3SE 0.4.json | 9 +-------- .../process/0.12mm Fine @Creality Ender3V3SE 0.6.json | 9 +-------- .../process/0.12mm Fine @Creality Ender3V3SE 0.8.json | 9 +-------- .../0.16mm Optimal @Creality Ender3V3SE 0.2.json | 9 +-------- .../0.16mm Optimal @Creality Ender3V3SE 0.4.json | 9 +-------- .../0.16mm Optimal @Creality Ender3V3SE 0.6.json | 9 +-------- .../0.16mm Optimal @Creality Ender3V3SE 0.8.json | 9 +-------- .../0.20mm Standard @Creality Ender3V3SE 0.2.json | 9 +-------- .../0.20mm Standard @Creality Ender3V3SE 0.4.json | 9 +-------- .../0.20mm Standard @Creality Ender3V3SE 0.6.json | 9 +-------- .../0.20mm Standard @Creality Ender3V3SE 0.8.json | 9 +-------- .../process/0.24mm Draft @Creality Ender3V3SE 0.2.json | 9 +-------- .../process/0.24mm Draft @Creality Ender3V3SE 0.4.json | 9 +-------- .../process/0.24mm Draft @Creality Ender3V3SE 0.6.json | 9 +-------- .../process/0.24mm Draft @Creality Ender3V3SE 0.8.json | 9 +-------- 20 files changed, 36 insertions(+), 148 deletions(-) diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json index c004b1c4ca..5c8c2b73b6 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json @@ -32,8 +32,8 @@ "2500" ], "machine_max_acceleration_retracting": [ - "2500", - "2500" + "500", + "500" ], "machine_max_acceleration_travel": [ "2500", @@ -102,7 +102,7 @@ "1" ], "retraction_speed": [ - "30" + "40" ], "deretraction_speed": [ "30" @@ -114,10 +114,10 @@ "default_filament_profile": [ "Creality Generic PLA @Ender-3V3-all" ], - "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "scan_first_layer": "0", "disable_m73": "1", "thumbnails": [ ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json index 532c2b1bfe..15ddb3e240 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json @@ -32,8 +32,8 @@ "2500" ], "machine_max_acceleration_retracting": [ - "2500", - "2500" + "500", + "500" ], "machine_max_acceleration_travel": [ "2500", @@ -102,7 +102,7 @@ "1" ], "retraction_speed": [ - "30" + "40" ], "deretraction_speed": [ "30" @@ -114,10 +114,10 @@ "default_filament_profile": [ "Creality Generic PLA @Ender-3V3-all" ], - "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "scan_first_layer": "0", "disable_m73": "1", "thumbnails": [ ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json index f8f186ad43..ccc53b8c90 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json @@ -32,8 +32,8 @@ "2500" ], "machine_max_acceleration_retracting": [ - "2500", - "2500" + "500", + "500" ], "machine_max_acceleration_travel": [ "2500", @@ -102,7 +102,7 @@ "1" ], "retraction_speed": [ - "30" + "40" ], "deretraction_speed": [ "30" @@ -114,10 +114,10 @@ "default_filament_profile": [ "Creality Generic PLA @Ender-3V3-all" ], - "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "scan_first_layer": "0", "disable_m73": "1", "thumbnails": [ ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json index 036ea052e3..f5e565f0cd 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json @@ -32,8 +32,8 @@ "2500" ], "machine_max_acceleration_retracting": [ - "2500", - "2500" + "500", + "500" ], "machine_max_acceleration_travel": [ "2500", @@ -102,7 +102,7 @@ "1" ], "retraction_speed": [ - "30" + "40" ], "deretraction_speed": [ "30" @@ -114,10 +114,10 @@ "default_filament_profile": [ "Creality Generic PLA @Ender-3V3-all" ], - "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "scan_first_layer": "0", "disable_m73": "1", "thumbnails": [ ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json index 49c2731f11..f4dc4ea367 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.2 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json index 6193b866f6..229bccb94b 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.4 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json index 155366410f..a1e2e3e46c 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.6 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json index e5ac797e01..30a8b1627a 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.8 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json index d2f8ed8eef..21823a3011 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.2 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json index 9c5884cf05..369b0a1a4a 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.4 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json index f6dab37b93..9075f1e446 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.6 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json index f0989462d4..cc50cdfef3 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.8 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json index b289cfe41a..7d8f89a63f 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.2 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json index 55bf46c031..73b1636de4 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.4 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json index d55e0c5059..a21af6c10a 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.6 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json index 84e860b5d9..e096287f0f 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.8 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json index ad47ef425f..20add5298d 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.2 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json index 4883e507ac..83e2f9d4e8 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.4 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json index 5a8332d664..9399833fed 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.6 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json index 597b70e6f1..9953e95710 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json @@ -105,14 +105,7 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "default_jerk": "8", - "outer_wall_jerk": "20", - "inner_wall_jerk": "20", - "infill_jerk": "20", - "top_surface_jerk": "20", - "initial_layer_jerk": "8", - "travel_jerk": "8", "compatible_printers": [ "Creality Ender-3 V3 SE 0.8 nozzle" ] -} \ No newline at end of file +}