1106 Flashforge: Update TPU, classic mode change etc. (#2627)

Co-authored-by: SoftFever <softfeverever@gmail.com>

resources/profiles/Flashforge/filament/Flashforge Generic HS PLA.json

@@ -187,10 +187,10 @@
     "0"
   ],
   "hot_plate_temp_initial_layer": [
-    "45"
+    "55"
   ],
   "hot_plate_temp": [
-    "45"
+    "50"
   ],
   "nozzle_temperature": [
     "220"

resources/profiles/Flashforge/filament/Flashforge Generic PLA-CF10.json

@@ -190,10 +190,10 @@
   "full_fan_speed_layer": [
     "0"
   ],
-  "hot_plate_temp": [
-    "50"
-  ],
   "hot_plate_temp_initial_layer": [
+    "55"
+  ],
+  "hot_plate_temp": [
     "50"
   ],
   "nozzle_temperature": [

resources/profiles/Flashforge/filament/Flashforge Generic PLA-Silk.json

@@ -13,10 +13,10 @@
     "12"
   ],
   "hot_plate_temp_initial_layer": [
-    "45"
+    "55"
   ],
   "hot_plate_temp": [
-    "45"
+    "50"
   ],
   "slow_down_layer_time": [
     "8"

resources/profiles/Flashforge/filament/Flashforge Generic PLA.json

@@ -13,10 +13,10 @@
     "25"
   ],
   "hot_plate_temp_initial_layer": [
-    "45"
+    "55"
   ],
   "hot_plate_temp": [
-    "45"
+    "50"
   ],
   "slow_down_layer_time": [
     "6"

resources/profiles/Flashforge/filament/Flashforge Generic TPU.json

@@ -71,13 +71,13 @@
     "; filament end gcode \n"
   ],
   "filament_flow_ratio": [
-    "0.95"
+    "1"
   ],
   "filament_is_support": [
     "0"
   ],
   "filament_max_volumetric_speed": [
-    "5"
+    "3.5"
   ],
   "filament_minimal_purge_on_wipe_tower": [
     "15"
@@ -92,7 +92,7 @@
     "nil"
   ],
   "filament_retraction_length": [
-    "0.4"
+    "1.2"
   ],
   "filament_retraction_minimum_travel": [
     "nil"
@@ -140,7 +140,7 @@
     "45"
   ],
   "nozzle_temperature": [
-    "230"
+    "235"
   ],
   "nozzle_temperature_initial_layer": [
     "235"
@@ -158,7 +158,7 @@
     "50%"
   ],
   "pressure_advance": [
-    "0.025"
+    "0.035"
   ],
   "reduce_fan_stop_start_freq": [
     "1"
@@ -173,7 +173,7 @@
     "8"
   ],
   "slow_down_min_speed": [
-    "15"
+    "20"
   ],
   "support_material_interface_fan_speed": [
     "100"

resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD5M 0.4 Nozzle.json

@@ -87,7 +87,7 @@
   "top_surface_pattern": "monotonicline",
   "top_surface_line_width": "0.42",
   "top_shell_layers": "3",
-  "top_shell_thickness": "0",
+  "top_shell_thickness": "0.6",
   "initial_layer_speed": "50",
   "initial_layer_infill_speed": "80",
   "outer_wall_speed": "200",
@@ -110,7 +110,7 @@
   "only_one_wall_top": "1",
   "slow_down_layers": "1",
   "small_perimeter_speed": "50%",
-  "overhang_speed_classic": "1",
+  "overhang_speed_classic": "0",
   "internal_bridge_speed": "50",
   "outer_wall_acceleration": "5000",
   "internal_solid_infill_acceleration": "7000",

resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle.json

@@ -87,7 +87,7 @@
   "top_surface_pattern": "monotonicline",
   "top_surface_line_width": "0.42",
   "top_shell_layers": "3",
-  "top_shell_thickness": "0",
+  "top_shell_thickness": "0.6",
   "initial_layer_speed": "50",
   "initial_layer_infill_speed": "80",
   "outer_wall_speed": "200",
@@ -110,7 +110,7 @@
   "only_one_wall_top": "1",
   "slow_down_layers": "1",
   "small_perimeter_speed": "50%",
-  "overhang_speed_classic": "1",
+  "overhang_speed_classic": "0",
   "internal_bridge_speed": "50",
   "outer_wall_acceleration": "5000",
   "internal_solid_infill_acceleration": "7000",

resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD5M 0.6 Nozzle.json

@@ -87,7 +87,7 @@
   "top_surface_pattern": "monotonicline",
   "top_surface_line_width": "0.62",
   "top_shell_layers": "3",
-  "top_shell_thickness": "0",
+  "top_shell_thickness": "0.6",
   "initial_layer_speed": "45",
   "initial_layer_infill_speed": "65",
   "outer_wall_speed": "120",
@@ -107,7 +107,7 @@
   "wall_generator": "classic",
   "only_one_wall_top": "1",
   "small_perimeter_speed": "50%",
-  "overhang_speed_classic": "1",
+  "overhang_speed_classic": "0",
   "internal_bridge_speed": "50",
   "outer_wall_acceleration": "5000",
   "internal_solid_infill_acceleration": "7000",

resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD5M Pro 0.6 Nozzle.json

@@ -107,7 +107,7 @@
   "overhang_2_4_speed": "40",
   "overhang_3_4_speed": "20",
   "overhang_4_4_speed": "10",
-  "overhang_speed_classic": "1",
+  "overhang_speed_classic": "0",
   "post_process": [],
   "precise_outer_wall": "0",
   "prime_tower_brim_width": "3",
@@ -174,7 +174,7 @@
   "thick_bridges": "0",
   "timelapse_type": "0",
   "top_shell_layers": "3",
-  "top_shell_thickness": "0",
+  "top_shell_thickness": "0.6",
   "top_solid_infill_flow_ratio": "1",
   "top_surface_acceleration": "2000",
   "top_surface_jerk": "9",