diff --git a/resources/profiles/Prusa/machine/Prusa MINIIS 0.25 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINIIS 0.25 nozzle.json
index 178e3e65e2..c65af761f8 100644
--- a/resources/profiles/Prusa/machine/Prusa MINIIS 0.25 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MINIIS 0.25 nozzle.json	
@@ -9,7 +9,7 @@
   "printer_model": "MINIIS",
   "printer_variant": "0.25",
   "default_filament_profile": [
-      "Prusa Generic PLA @MINIIS"
+      "Prusa Generic PLA @MINIIS 0.25"
   ],
   "default_print_profile": "0.12mm Standard @MINIIS",
   "nozzle_diameter": [
diff --git a/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json
index 418dc5fef3..38ea5980f2 100644
--- a/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json	
@@ -99,7 +99,7 @@
     "printable_height": "180",
     "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720 ; Move print head up{endif}\nG1 X170 Y170 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+50, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM572 S0 ; reset PA\nM569 S1 X Y ; reset to stealthchop for X Y\nM84 ; disable motors\n; max_layer_z = [max_layer_z]",
     "machine_pause_gcode": "M601",
-    "machine_start_gcode": "M862.3 P \"MINI\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM862.5 P2 ; g-code level check\nM862.6 P\"Input shaper\" ; FW feature check\nM115 6.0.0+14794\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM569 S1 X Y ; set stealthchop for X Y\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\n\nG1 X0 Y-2 Z3 F2400\n\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X10 Z0.2 F1000\nG1 X70 E8 F900\nG1 X140 E10 F700\nG92 E0\n\nM569 S0 X Y ; set spreadcycle for X Y\nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM572 W0.06 ; set smooth time\nM221 S95 ; set flow",
+    "machine_start_gcode": "M862.3 P \"MINI\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM862.5 P2 ; g-code level check\nM862.6 P\"Input shaper\" ; FW feature check\nM115 U6.0.1+14848\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM569 S1 X Y ; set stealthchop for X Y\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\n\nG1 X0 Y-2 Z3 F2400\n\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X10 Z0.2 F1000\nG1 X70 E8 F900\nG1 X140 E10 F700\nG92 E0\n\nM569 S0 X Y ; set spreadcycle for X Y\nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM572 W0.06 ; set smooth time\nM221 S95 ; set flow",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\nM201 X{interpolate_table(extruded_weight_total, (0,4000), (1000,1700), (10000,1700))} Y{interpolate_table(extruded_weight_total, (0,4000), (1000,1700), (10000,1700))}\n{if ! spiral_mode}M74 W[extruded_weight_total]{endif}\n",
     "change_filament_gcode": "M600\nG1 E0.4 F1500 ; prime after color change",
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
diff --git a/resources/profiles/Prusa/machine/Prusa MINIIS 0.6 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINIIS 0.6 nozzle.json
index 69775ca1e5..fc25320c97 100644
--- a/resources/profiles/Prusa/machine/Prusa MINIIS 0.6 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MINIIS 0.6 nozzle.json	
@@ -9,7 +9,7 @@
   "printer_model": "MINIIS",
   "printer_variant": "0.6",
   "default_filament_profile": [
-      "Prusa Generic PLA @MINIIS"
+      "Prusa Generic PLA @MINIIS 0.6"
   ],
   "default_print_profile": "0.25mm Standard @MINIIS",
   "nozzle_diameter": [
diff --git a/resources/profiles/Prusa/machine/Prusa MINIIS 0.8 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINIIS 0.8 nozzle.json
index 9eb6861bfb..f6bba228ca 100644
--- a/resources/profiles/Prusa/machine/Prusa MINIIS 0.8 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MINIIS 0.8 nozzle.json	
@@ -9,7 +9,7 @@
   "printer_model": "MINIIS",
   "printer_variant": "0.8",
   "default_filament_profile": [
-      "Prusa Generic PLA @MINIIS"
+      "Prusa Generic PLA @MINIIS 0.8"
   ],
   "default_print_profile": "0.40mm Standard @MINIIS",
   "nozzle_diameter": [
diff --git a/resources/profiles/Prusa/process/0.05mm Detail @MINIIS.json b/resources/profiles/Prusa/process/0.05mm Detail @MINIIS.json
index bc1222ce36..033f40d22f 100644
--- a/resources/profiles/Prusa/process/0.05mm Detail @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.05mm Detail @MINIIS.json	
@@ -14,7 +14,7 @@
   "internal_solid_infill_line_width": "0.25",
   "support_line_width": "0.25",
   "layer_height": "0.05",
-  "initial_layer_print_height": "0.2",
+  "initial_layer_print_height": "0.15",
   "top_shell_thickness": "0.7",
   "top_shell_layers": "13",
   "bottom_shell_thickness": "0.5",
diff --git a/resources/profiles/Prusa/process/0.07mm Detail @MINIIS.json b/resources/profiles/Prusa/process/0.07mm Detail @MINIIS.json
index 575a23a674..51e281895e 100644
--- a/resources/profiles/Prusa/process/0.07mm Detail @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.07mm Detail @MINIIS.json	
@@ -14,7 +14,7 @@
   "internal_solid_infill_line_width": "0.25",
   "support_line_width": "0.25",
   "layer_height": "0.07",
-  "initial_layer_print_height": "0.2",
+  "initial_layer_print_height": "0.15",
   "top_shell_thickness": "0.7",
   "top_shell_layers": "10",
   "bottom_shell_thickness": "0.5",
diff --git a/resources/profiles/Prusa/process/0.12mm Speed @MINIIS.json b/resources/profiles/Prusa/process/0.12mm Speed @MINIIS.json
index 2d2ee203ab..983535f48d 100644
--- a/resources/profiles/Prusa/process/0.12mm Speed @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.12mm Speed @MINIIS.json	
@@ -14,7 +14,7 @@
   "internal_solid_infill_line_width": "0.27",
   "support_line_width": "0.25",
   "layer_height": "0.12",
-  "initial_layer_print_height": "0.2",
+  "initial_layer_print_height": "0.15",
   "top_shell_thickness": "0.7",
   "top_shell_layers": "9",
   "bottom_shell_thickness": "0.5",
diff --git a/resources/profiles/Prusa/process/0.12mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.12mm Standard @MINIIS.json
index ffbd39268f..4192e7d5f7 100644
--- a/resources/profiles/Prusa/process/0.12mm Standard @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.12mm Standard @MINIIS.json	
@@ -14,7 +14,7 @@
   "internal_solid_infill_line_width": "0.27",
   "support_line_width": "0.25",
   "layer_height": "0.12",
-  "initial_layer_print_height": "0.2",
+  "initial_layer_print_height": "0.15",
   "top_shell_thickness": "0.7",
   "top_shell_layers": "9",
   "bottom_shell_thickness": "0.5",
diff --git a/resources/profiles/Prusa/process/0.15mm Speed @MINIIS 0.25.json b/resources/profiles/Prusa/process/0.15mm Speed @MINIIS 0.25.json
index aa50d7e06e..da4e58bc3b 100644
--- a/resources/profiles/Prusa/process/0.15mm Speed @MINIIS 0.25.json	
+++ b/resources/profiles/Prusa/process/0.15mm Speed @MINIIS 0.25.json	
@@ -14,7 +14,7 @@
   "internal_solid_infill_line_width": "0.27",
   "support_line_width": "0.25",
   "layer_height": "0.15",
-  "initial_layer_print_height": "0.20",
+  "initial_layer_print_height": "0.15",
   "top_shell_thickness": "0.7",
   "top_shell_layers": "5",
   "bottom_shell_thickness": "0.5",
diff --git a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.25.json b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.25.json
index d6e26a6a34..57c789f5bd 100644
--- a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.25.json	
+++ b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.25.json	
@@ -14,7 +14,7 @@
   "internal_solid_infill_line_width": "0.27",
   "support_line_width": "0.25",
   "layer_height": "0.15",
-  "initial_layer_print_height": "0.20",
+  "initial_layer_print_height": "0.15",
   "top_shell_thickness": "0.7",
   "top_shell_layers": "5",
   "bottom_shell_thickness": "0.5",
diff --git a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.6.json b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.6.json
index dca892dfcc..52819af718 100644
--- a/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.6.json	
+++ b/resources/profiles/Prusa/process/0.15mm Standard @MINIIS 0.6.json	
@@ -14,7 +14,8 @@
   "internal_solid_infill_line_width": "0.6",
   "support_line_width": "0.5",
   "layer_height": "0.15",
-  "initial_layer_print_height": "0.20",
+  "initial_layer_print_height": "0.25",
+  "wall_loops": "2",
   "top_shell_thickness": "0.7",
   "top_shell_layers": "5",
   "bottom_shell_thickness": "0.5",
diff --git a/resources/profiles/Prusa/process/0.20mm Speed @MINIIS 0.6.json b/resources/profiles/Prusa/process/0.20mm Speed @MINIIS 0.6.json
index 34f2125fa2..0d7930f441 100644
--- a/resources/profiles/Prusa/process/0.20mm Speed @MINIIS 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm Speed @MINIIS 0.6.json	
@@ -8,6 +8,8 @@
   "compatible_printers": [
     "Prusa MINIIS 0.6 nozzle"
   ],
+  "layer_height": "0.20",
+  "initial_layer_print_height": "0.25",
   "line_width": "0.68",
   "inner_wall_line_width": "0.62",
   "outer_wall_line_width": "0.62",
@@ -16,6 +18,7 @@
   "initial_layer_line_width": "0.68",
   "internal_solid_infill_line_width": "0.62",
   "support_line_width": "0.5",
+  "wall_loops": "2",
   "outer_wall_speed": "115",
   "inner_wall_speed": "115",
   "small_perimeter_speed": "115",
diff --git a/resources/profiles/Prusa/process/0.20mm Standard @MINIIS 0.6.json b/resources/profiles/Prusa/process/0.20mm Standard @MINIIS 0.6.json
index 70a388dc98..16d53885bc 100644
--- a/resources/profiles/Prusa/process/0.20mm Standard @MINIIS 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm Standard @MINIIS 0.6.json	
@@ -5,6 +5,8 @@
   "from": "system",
   "instantiation": "true",
   "inherits": "process_common_miniis",
+  "layer_height": "0.20",
+  "initial_layer_print_height": "0.25",
   "line_width": "0.68",
   "inner_wall_line_width": "0.62",
   "outer_wall_line_width": "0.62",
@@ -13,6 +15,7 @@
   "initial_layer_line_width": "0.68",
   "internal_solid_infill_line_width": "0.62",
   "support_line_width": "0.5",
+  "wall_loops": "2",
   "sparse_infill_speed": "120",
   "internal_solid_infill_speed": "100",
   "top_surface_speed": "70",
diff --git a/resources/profiles/Prusa/process/0.25mm Speed @MINIIS.json b/resources/profiles/Prusa/process/0.25mm Speed @MINIIS.json
index edb6a5430b..a0dcf72759 100644
--- a/resources/profiles/Prusa/process/0.25mm Speed @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.25mm Speed @MINIIS.json	
@@ -8,13 +8,14 @@
   "line_width": "0.68",
   "inner_wall_line_width": "0.68",
   "outer_wall_line_width": "0.68",
-  "top_surface_line_width": "0.5",
+  "top_surface_line_width": "0.55",
   "sparse_infill_line_width": "0.68",
   "initial_layer_line_width": "0.68",
   "internal_solid_infill_line_width": "0.68",
-  "support_line_width": "0.55",
+  "support_line_width": "0.5",
   "layer_height": "0.25",
-  "initial_layer_print_height": "0.2",
+  "initial_layer_print_height": "0.25",
+  "wall_loops": "2",
   "top_shell_thickness": "0.9",
   "top_shell_layers": "4",
   "bottom_shell_thickness": "0.6",
diff --git a/resources/profiles/Prusa/process/0.25mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.25mm Standard @MINIIS.json
index d46e23e0ff..0f3dcf81b6 100644
--- a/resources/profiles/Prusa/process/0.25mm Standard @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.25mm Standard @MINIIS.json	
@@ -8,13 +8,14 @@
   "line_width": "0.68",
   "inner_wall_line_width": "0.68",
   "outer_wall_line_width": "0.68",
-  "top_surface_line_width": "0.5",
+  "top_surface_line_width": "0.55",
   "sparse_infill_line_width": "0.68",
   "initial_layer_line_width": "0.68",
   "internal_solid_infill_line_width": "0.68",
-  "support_line_width": "0.55",
+  "support_line_width": "0.5",
   "layer_height": "0.25",
-  "initial_layer_print_height": "0.2",
+  "initial_layer_print_height": "0.25",
+  "wall_loops": "2",
   "top_shell_thickness": "0.9",
   "top_shell_layers": "4",
   "bottom_shell_thickness": "0.6",
diff --git a/resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json b/resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json
index 80cda29acc..447720117b 100644
--- a/resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.30mm Detail @MINIIS.json	
@@ -14,9 +14,10 @@
   "internal_solid_infill_line_width": "0.9",
   "support_line_width": "0.65",
   "layer_height": "0.3",
-  "initial_layer_print_height": "0.2",
+  "initial_layer_print_height": "0.4",
   "top_shell_thickness": "0.7",
   "top_shell_layers": "3",
+  "wall_loops": "2",
   "bottom_shell_thickness": "0.5",
   "bottom_shell_layers": "2",
   "travel_speed": "300",
diff --git a/resources/profiles/Prusa/process/0.35mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.35mm Standard @MINIIS.json
index e3d12815f5..6aaff5322a 100644
--- a/resources/profiles/Prusa/process/0.35mm Standard @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.35mm Standard @MINIIS.json	
@@ -8,13 +8,14 @@
   "line_width": "0.68",
   "inner_wall_line_width": "0.68",
   "outer_wall_line_width": "0.68",
-  "top_surface_line_width": "0.5",
+  "top_surface_line_width": "0.55",
   "sparse_infill_line_width": "0.68",
   "initial_layer_line_width": "0.68",
   "internal_solid_infill_line_width": "0.68",
-  "support_line_width": "0.55",
-  "initial_layer_print_height": "0.2",
+  "support_line_width": "0.5",
+  "initial_layer_print_height": "0.25",
   "layer_height": "0.35",
+  "wall_loops": "2",
   "top_shell_thickness": "0.9",
   "top_shell_layers": "4",
   "bottom_shell_thickness": "0.6",
diff --git a/resources/profiles/Prusa/process/0.40mm Standard @MINIIS.json b/resources/profiles/Prusa/process/0.40mm Standard @MINIIS.json
index 3f2bd1d86a..ab085de8be 100644
--- a/resources/profiles/Prusa/process/0.40mm Standard @MINIIS.json	
+++ b/resources/profiles/Prusa/process/0.40mm Standard @MINIIS.json	
@@ -14,7 +14,8 @@
   "internal_solid_infill_line_width": "0.9",
   "support_line_width": "0.65",
   "layer_height": "0.4",
-  "initial_layer_print_height": "0.2",
+  "initial_layer_print_height": "0.3",
+  "wall_loops": "2",
   "top_shell_thickness": "1.2",
   "top_shell_layers": "4",
   "bottom_shell_thickness": "0.8",
diff --git a/resources/profiles/Prusa/process/process_common_miniis.json b/resources/profiles/Prusa/process/process_common_miniis.json
index 7260a44fd2..0bc991159b 100644
--- a/resources/profiles/Prusa/process/process_common_miniis.json
+++ b/resources/profiles/Prusa/process/process_common_miniis.json
@@ -49,6 +49,7 @@
   "infill_wall_overlap": "10%",
   "enable_arc_fitting": "1",
   "support_speed": "100",
+  "support_style": "snug",
   "precise_outer_wall": "1",
   "overhang_reverse": "1"
 }
\ No newline at end of file