diff --git a/resources/profiles/FlyingBear.json b/resources/profiles/FlyingBear.json index 20ae89128a..28b9124682 100644 --- a/resources/profiles/FlyingBear.json +++ b/resources/profiles/FlyingBear.json @@ -7,7 +7,12 @@ { "name": "FlyingBear Reborn3", "sub_path": "machine/FlyingBear Reborn3.json" + }, + { + "name": "FlyingBear S1", + "sub_path": "machine/S1/FlyingBear S1.json" } + ], "process_list": [ { @@ -22,6 +27,10 @@ "name": "0.12mm Fine @FlyingBear Reborn3", "sub_path": "process/0.12mm Fine @FlyingBear Reborn3.json" }, + { + "name": "0.16mm Optimal @FlyingBear Reborn3", + "sub_path": "process/0.16mm Optimal @FlyingBear Reborn3.json" + }, { "name": "0.20mm Standard @FlyingBear Reborn3", "sub_path": "process/0.20mm Standard @FlyingBear Reborn3.json" @@ -29,7 +38,35 @@ { "name": "0.24mm Draft @FlyingBear Reborn3", "sub_path": "process/0.24mm Draft @FlyingBear Reborn3.json" + }, + + + + { + "name": "fdm_process_common_S1", + "sub_path": "process/S1/fdm_process_common_S1.json" + }, + { + "name": "0.20mm Standard @FlyingBear S1", + "sub_path": "process/S1/0.20mm Standard @FlyingBear S1.json" + }, + { + "name": "0.08mm Extra Fine @FlyingBear S1", + "sub_path": "process/S1/0.08mm Extra Fine @FlyingBear S1.json" + }, + { + "name": "0.12mm Fine @FlyingBear S1", + "sub_path": "process/S1/0.12mm Fine @FlyingBear S1.json" + }, + { + "name": "0.16mm Optimal @FlyingBear S1", + "sub_path": "process/S1/0.16mm Optimal @FlyingBear S1.json" + }, + { + "name": "0.24mm Draft @FlyingBear S1", + "sub_path": "process/S1/0.24mm Draft @FlyingBear S1.json" } + ], "filament_list": [ { @@ -83,7 +120,138 @@ { "name": "FlyingBear Generic PA-CF", "sub_path": "filament/FlyingBear Generic PA-CF.json" + }, + + { + "name": "fdm_filament_pla_Hyper", + "sub_path": "filament/fdm_filament_pla_Hyper.json" + }, + { + "name": "FlyingBear PLA Hyper", + "sub_path": "filament/FlyingBear PLA Hyper.json" + }, + + + { + "name": "fdm_filament_common_S1", + "sub_path": "filament/S1/fdm_filament_common_S1.json" + }, + { + "name": "fdm_filament_abs @S1", + "sub_path": "filament/S1/fdm_filament_abs @S1.json" + }, + { + "name": "FlyingBear ABS @S1", + "sub_path": "filament/S1/FlyingBear ABS @S1.json" + }, + { + "name": "fdm_filament_pa @S1", + "sub_path": "filament/S1/fdm_filament_pa @S1.json" + }, + { + "name": "FlyingBear PA-CF @S1", + "sub_path": "filament/S1/FlyingBear PA-CF @S1.json" + }, + { + "name": "fdm_filament_pc @S1", + "sub_path": "filament/S1/fdm_filament_pc @S1.json" + }, + { + "name": "FlyingBear PC @S1", + "sub_path": "filament/S1/FlyingBear PC @S1.json" + }, + { + "name": "fdm_filament_pet @S1", + "sub_path": "filament/S1/fdm_filament_pet @S1.json" + }, + { + "name": "FlyingBear PETG @S1", + "sub_path": "filament/S1/FlyingBear PETG @S1.json" + }, + { + "name": "fdm_filament_pla @S1", + "sub_path": "filament/S1/fdm_filament_pla @S1.json" + }, + { + "name": "FlyingBear PLA @S1", + "sub_path": "filament/S1/FlyingBear PLA @S1.json" + }, + { + "name": "fdm_filament_pla_Hyper @S1", + "sub_path": "filament/S1/fdm_filament_pla_Hyper @S1.json" + }, + { + "name": "FlyingBear PLA Hyper @S1", + "sub_path": "filament/S1/FlyingBear PLA Hyper @S1.json" + }, + { + "name": "fdm_filament_tpu @S1", + "sub_path": "filament/S1/fdm_filament_tpu @S1.json" + }, + { + "name": "FlyingBear TPU @S1", + "sub_path": "filament/S1/FlyingBear TPU @S1.json" + }, + { + "name": "fdm_filament_abs_other @S1", + "sub_path": "filament/S1/fdm_filament_abs_other @S1.json" + }, + { + "name": "Other ABS @S1", + "sub_path": "filament/S1/Other ABS @S1.json" + }, + { + "name": "fdm_filament_pa_other @S1", + "sub_path": "filament/S1/fdm_filament_pa_other @S1.json" + }, + { + "name": "Other PA-CF @S1", + "sub_path": "filament/S1/Other PA-CF @S1.json" + }, + { + "name": "fdm_filament_pc_other @S1", + "sub_path": "filament/S1/fdm_filament_pc_other @S1.json" + }, + { + "name": "Other PC @S1", + "sub_path": "filament/S1/Other PC @S1.json" + }, + { + "name": "fdm_filament_pet_other @S1", + "sub_path": "filament/S1/fdm_filament_pet_other @S1.json" + }, + { + "name": "Other PETG @S1", + "sub_path": "filament/S1/Other PETG @S1.json" + }, + { + "name": "fdm_filament_pla_other @S1", + "sub_path": "filament/S1/fdm_filament_pla_other @S1.json" + }, + { + "name": "Other PLA @S1", + "sub_path": "filament/S1/Other PLA @S1.json" + }, + { + "name": "fdm_filament_pla_Hyper_other @S1", + "sub_path": "filament/S1/fdm_filament_pla_Hyper_other @S1.json" + }, + { + "name": "Other PLA Hyper @S1", + "sub_path": "filament/S1/Other PLA Hyper @S1.json" + }, + { + "name": "fdm_filament_tpu_other @S1", + "sub_path": "filament/S1/fdm_filament_tpu_other @S1.json" + }, + { + "name": "Other TPU @S1", + "sub_path": "filament/S1/Other TPU @S1.json" } + + + + ], "machine_list": [ { @@ -97,6 +265,14 @@ { "name": "FlyingBear Reborn3 0.4 nozzle", "sub_path": "machine/FlyingBear Reborn3 0.4 nozzle.json" + }, + + + { + "name": "FlyingBear S1 0.4 nozzle", + "sub_path": "machine/S1/FlyingBear S1 0.4 nozzle.json" } + + ] } diff --git a/resources/profiles/FlyingBear/lyingBear Reborn3-texture.png b/resources/profiles/FlyingBear/FlyingBear Reborn3-texture.png similarity index 100% rename from resources/profiles/FlyingBear/lyingBear Reborn3-texture.png rename to resources/profiles/FlyingBear/FlyingBear Reborn3-texture.png diff --git a/resources/profiles/FlyingBear/FlyingBear S1-bed.stl b/resources/profiles/FlyingBear/FlyingBear S1-bed.stl new file mode 100644 index 0000000000..05ea70db46 Binary files /dev/null and b/resources/profiles/FlyingBear/FlyingBear S1-bed.stl differ diff --git a/resources/profiles/FlyingBear/FlyingBear S1-texture.png b/resources/profiles/FlyingBear/FlyingBear S1-texture.png new file mode 100644 index 0000000000..928fc8e0d5 Binary files /dev/null and b/resources/profiles/FlyingBear/FlyingBear S1-texture.png differ diff --git a/resources/profiles/FlyingBear/FlyingBear S1_cover.png b/resources/profiles/FlyingBear/FlyingBear S1_cover.png new file mode 100644 index 0000000000..6a80a198be Binary files /dev/null and b/resources/profiles/FlyingBear/FlyingBear S1_cover.png differ diff --git a/resources/profiles/FlyingBear/filament/S1/FlyingBear ABS @S1.json b/resources/profiles/FlyingBear/filament/S1/FlyingBear ABS @S1.json new file mode 100644 index 0000000000..c5961fb300 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/FlyingBear ABS @S1.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "name": "FlyingBear ABS @S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_abs @S1", + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.058" + ], + "filament_retraction_length": [ + "0.8" + ], + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/FlyingBear PA-CF @S1.json b/resources/profiles/FlyingBear/filament/S1/FlyingBear PA-CF @S1.json new file mode 100644 index 0000000000..7c64119f0e --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/FlyingBear PA-CF @S1.json @@ -0,0 +1,34 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSA04", + "name": "FlyingBear PA-CF @S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pa @S1", + "filament_type": [ + "PA-CF" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "4" + ], + "filament_retract_before_wipe": [ + "0%" + ], + "filament_retraction_length": [ + "0.8" + ], + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + + ] + } diff --git a/resources/profiles/FlyingBear/filament/S1/FlyingBear PC @S1.json b/resources/profiles/FlyingBear/filament/S1/FlyingBear PC @S1.json new file mode 100644 index 0000000000..e555e3b770 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/FlyingBear PC @S1.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "filament_id": "GFC99", + "setting_id": "GFSA04", + "name": "FlyingBear PC @S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pc @S1", + "filament_max_volumetric_speed": [ + "12" + ], + "filament_flow_ratio": [ + "0.94" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.058" + ], + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] + } diff --git a/resources/profiles/FlyingBear/filament/S1/FlyingBear PETG @S1.json b/resources/profiles/FlyingBear/filament/S1/FlyingBear PETG @S1.json new file mode 100644 index 0000000000..7f00939382 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/FlyingBear PETG @S1.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "filament_id": "GFG99", + "setting_id": "GFSA04", + "name": "FlyingBear PETG @S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pet @S1", + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_cooling_layer_time": [ + "30" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.084" + ], + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json b/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json new file mode 100644 index 0000000000..4157771395 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSA04", + "name": "FlyingBear PLA @S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla @S1", + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "slow_down_layer_time": [ + "8" + ], + "pressure_advance": [ + "0.084" + ], + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA Hyper @S1.json b/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA Hyper @S1.json new file mode 100644 index 0000000000..bce55200ce --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA Hyper @S1.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSA04", + "name": "FlyingBear PLA Hyper @S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla_Hyper @S1", + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "slow_down_layer_time": [ + "8" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.02" + ], + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/FlyingBear TPU @S1.json b/resources/profiles/FlyingBear/filament/S1/FlyingBear TPU @S1.json new file mode 100644 index 0000000000..3b9f38b591 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/FlyingBear TPU @S1.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "filament_id": "GFU99", + "setting_id": "GFSA04", + "name": "FlyingBear TPU @S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_tpu @S1", + "filament_max_volumetric_speed": [ + "3" + ], + "filament_flow_ratio": [ + "0.94" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.13" + ], + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/Other ABS @S1.json b/resources/profiles/FlyingBear/filament/S1/Other ABS @S1.json new file mode 100644 index 0000000000..de45a0e677 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/Other ABS @S1.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "name": "Other ABS @S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_abs_other @S1", + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.058" + ], + "filament_retraction_length": [ + "0.8" + ], + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/Other PA-CF @S1.json b/resources/profiles/FlyingBear/filament/S1/Other PA-CF @S1.json new file mode 100644 index 0000000000..a0faa0f10b --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/Other PA-CF @S1.json @@ -0,0 +1,34 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSA04", + "name": "Other PA-CF @S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pa_other @S1", + "filament_type": [ + "PA-CF" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "4" + ], + "filament_retract_before_wipe": [ + "0%" + ], + "filament_retraction_length": [ + "0.8" + ], + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + + ] + } diff --git a/resources/profiles/FlyingBear/filament/S1/Other PC @S1.json b/resources/profiles/FlyingBear/filament/S1/Other PC @S1.json new file mode 100644 index 0000000000..b7fd44d737 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/Other PC @S1.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "filament_id": "GFC99", + "setting_id": "GFSA04", + "name": "Other PC @S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pc_other @S1", + "filament_max_volumetric_speed": [ + "12" + ], + "filament_flow_ratio": [ + "0.94" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.058" + ], + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] + } diff --git a/resources/profiles/FlyingBear/filament/S1/Other PETG @S1.json b/resources/profiles/FlyingBear/filament/S1/Other PETG @S1.json new file mode 100644 index 0000000000..141c1caf15 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/Other PETG @S1.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "filament_id": "GFG99", + "setting_id": "GFSA04", + "name": "Other PETG @S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pet_other @S1", + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_cooling_layer_time": [ + "30" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.084" + ], + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json b/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json new file mode 100644 index 0000000000..e6e53290b3 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSA04", + "name": "Other PLA @S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla_other @S1", + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "slow_down_layer_time": [ + "8" + ], + "pressure_advance": [ + "0.084" + ], + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/Other PLA Hyper @S1.json b/resources/profiles/FlyingBear/filament/S1/Other PLA Hyper @S1.json new file mode 100644 index 0000000000..eeb3c91aac --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/Other PLA Hyper @S1.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSA04", + "name": "Other PLA Hyper @S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla_Hyper_other @S1", + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "slow_down_layer_time": [ + "8" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.02" + ], + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/Other TPU @S1.json b/resources/profiles/FlyingBear/filament/S1/Other TPU @S1.json new file mode 100644 index 0000000000..1e38ef5701 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/Other TPU @S1.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "filament_id": "GFU99", + "setting_id": "GFSA04", + "name": "Other TPU @S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_tpu_other @S1", + "filament_max_volumetric_speed": [ + "3" + ], + "filament_flow_ratio": [ + "0.94" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.13" + ], + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs @S1.json new file mode 100644 index 0000000000..2b7ad42520 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs @S1.json @@ -0,0 +1,97 @@ +{ + "type": "filament", + "name": "fdm_filament_abs @S1", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common_S1", + "filament_vendor": [ + "FlyingBear" + ], + "cool_plate_temp" : [ + "105" + ], + "eng_plate_temp" : [ + "105" + ], + "hot_plate_temp" : [ + "105" + ], + "textured_plate_temp" : [ + "105" + ], + "cool_plate_temp_initial_layer" : [ + "105" + ], + "eng_plate_temp_initial_layer" : [ + "105" + ], + "hot_plate_temp_initial_layer" : [ + "105" + ], + "textured_plate_temp_initial_layer" : [ + "105" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_type": [ + "ABS" + ], + "filament_density": [ + "1.04" + ], + "filament_cost": [ + "20" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "25%" + ], + "overhang_fan_speed": [ + "80" + ], + "nozzle_temperature": [ + "230" + ], + "temperature_vitrification": [ + "110" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "slow_down_min_speed": [ + "20" + ], + "activate_air_filtration": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "5" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs_other @S1.json new file mode 100644 index 0000000000..d2e30901f6 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_abs_other @S1.json @@ -0,0 +1,97 @@ +{ + "type": "filament", + "name": "fdm_filament_abs_other @S1", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common_S1", + "filament_vendor": [ + "Other" + ], + "cool_plate_temp" : [ + "105" + ], + "eng_plate_temp" : [ + "105" + ], + "hot_plate_temp" : [ + "105" + ], + "textured_plate_temp" : [ + "105" + ], + "cool_plate_temp_initial_layer" : [ + "105" + ], + "eng_plate_temp_initial_layer" : [ + "105" + ], + "hot_plate_temp_initial_layer" : [ + "105" + ], + "textured_plate_temp_initial_layer" : [ + "105" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_type": [ + "ABS" + ], + "filament_density": [ + "1.04" + ], + "filament_cost": [ + "20" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "25%" + ], + "overhang_fan_speed": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "temperature_vitrification": [ + "110" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "slow_down_min_speed": [ + "20" + ], + "activate_air_filtration": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "5" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_common_S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_common_S1.json new file mode 100644 index 0000000000..be03d1c3bd --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_common_S1.json @@ -0,0 +1,144 @@ +{ + "type": "filament", + "name": "fdm_filament_common_S1", + "from": "system", + "instantiation": "false", + "cool_plate_temp" : [ + "60" + ], + "eng_plate_temp" : [ + "60" + ], + "hot_plate_temp" : [ + "60" + ], + "textured_plate_temp" : [ + "60" + ], + "cool_plate_temp_initial_layer" : [ + "60" + ], + "eng_plate_temp_initial_layer" : [ + "60" + ], + "hot_plate_temp_initial_layer" : [ + "60" + ], + "textured_plate_temp_initial_layer" : [ + "60" + ], + "overhang_fan_threshold": [ + "0%" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "1" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "fan_cooling_layer_time": [ + "60" + ], + "filament_cost": [ + "0" + ], + "filament_density": [ + "0" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_max_volumetric_speed": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_settings_id": [ + "" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "bed_type": [ + "Cool Plate" + ], + "nozzle_temperature_initial_layer": [ + "200" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "35" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "nozzle_temperature": [ + "200" + ], + "temperature_vitrification": [ + "100" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa @S1.json new file mode 100644 index 0000000000..4cc9edb309 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa @S1.json @@ -0,0 +1,97 @@ +{ + "type": "filament", + "name": "fdm_filament_pa @S1", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common_S1", + "filament_vendor": [ + "FlyingBear" + ], + "cool_plate_temp" : [ + "0" + ], + "eng_plate_temp" : [ + "110" + ], + "hot_plate_temp" : [ + "110" + ], + "textured_plate_temp" : [ + "110" + ], + "cool_plate_temp_initial_layer" : [ + "0" + ], + "eng_plate_temp_initial_layer" : [ + "110" + ], + "hot_plate_temp_initial_layer" : [ + "110" + ], + "textured_plate_temp_initial_layer" : [ + "110" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "5" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "PA" + ], + "filament_density": [ + "1.04" + ], + "filament_cost": [ + "20" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_speed": [ + "40" + ], + "nozzle_temperature": [ + "240" + ], + "temperature_vitrification": [ + "108" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "slow_down_min_speed": [ + "20" + ], + "activate_air_filtration": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "2" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa_other @S1.json new file mode 100644 index 0000000000..e6e6810b6a --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pa_other @S1.json @@ -0,0 +1,97 @@ +{ + "type": "filament", + "name": "fdm_filament_pa_other @S1", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common_S1", + "filament_vendor": [ + "Other" + ], + "cool_plate_temp" : [ + "0" + ], + "eng_plate_temp" : [ + "110" + ], + "hot_plate_temp" : [ + "110" + ], + "textured_plate_temp" : [ + "110" + ], + "cool_plate_temp_initial_layer" : [ + "0" + ], + "eng_plate_temp_initial_layer" : [ + "110" + ], + "hot_plate_temp_initial_layer" : [ + "110" + ], + "textured_plate_temp_initial_layer" : [ + "110" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "5" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "PA" + ], + "filament_density": [ + "1.04" + ], + "filament_cost": [ + "20" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_speed": [ + "40" + ], + "nozzle_temperature": [ + "260" + ], + "temperature_vitrification": [ + "108" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "slow_down_min_speed": [ + "20" + ], + "activate_air_filtration": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "2" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc @S1.json new file mode 100644 index 0000000000..977729341f --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc @S1.json @@ -0,0 +1,100 @@ +{ + "type": "filament", + "name": "fdm_filament_pc @S1", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common_S1", + "filament_vendor": [ + "FlyingBear" + ], + "cool_plate_temp" : [ + "0" + ], + "eng_plate_temp" : [ + "110" + ], + "hot_plate_temp" : [ + "110" + ], + "textured_plate_temp" : [ + "110" + ], + "cool_plate_temp_initial_layer" : [ + "0" + ], + "eng_plate_temp_initial_layer" : [ + "110" + ], + "hot_plate_temp_initial_layer" : [ + "110" + ], + "textured_plate_temp_initial_layer" : [ + "110" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PC" + ], + "filament_density": [ + "1.04" + ], + "filament_cost": [ + "20" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "25%" + ], + "overhang_fan_speed": [ + "60" + ], + "nozzle_temperature": [ + "240" + ], + "temperature_vitrification": [ + "140" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "slow_down_min_speed": [ + "20" + ], + "activate_air_filtration": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "2" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc_other @S1.json new file mode 100644 index 0000000000..731c700f5e --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pc_other @S1.json @@ -0,0 +1,100 @@ +{ + "type": "filament", + "name": "fdm_filament_pc_other @S1", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common_S1", + "filament_vendor": [ + "Other" + ], + "cool_plate_temp" : [ + "0" + ], + "eng_plate_temp" : [ + "110" + ], + "hot_plate_temp" : [ + "110" + ], + "textured_plate_temp" : [ + "110" + ], + "cool_plate_temp_initial_layer" : [ + "0" + ], + "eng_plate_temp_initial_layer" : [ + "110" + ], + "hot_plate_temp_initial_layer" : [ + "110" + ], + "textured_plate_temp_initial_layer" : [ + "110" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PC" + ], + "filament_density": [ + "1.04" + ], + "filament_cost": [ + "20" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "25%" + ], + "overhang_fan_speed": [ + "60" + ], + "nozzle_temperature": [ + "260" + ], + "temperature_vitrification": [ + "140" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "slow_down_min_speed": [ + "20" + ], + "activate_air_filtration": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "2" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet @S1.json new file mode 100644 index 0000000000..09d5310c17 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet @S1.json @@ -0,0 +1,88 @@ +{ + "type": "filament", + "name": "fdm_filament_pet @S1", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common_S1", + "filament_vendor": [ + "FlyingBear" + ], + "cool_plate_temp" : [ + "60" + ], + "eng_plate_temp" : [ + "0" + ], + "hot_plate_temp" : [ + "75" + ], + "textured_plate_temp" : [ + "80" + ], + "cool_plate_temp_initial_layer" : [ + "60" + ], + "eng_plate_temp_initial_layer" : [ + "0" + ], + "hot_plate_temp_initial_layer" : [ + "75" + ], + "textured_plate_temp_initial_layer" : [ + "80" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PETG" + ], + "filament_density": [ + "1.27" + ], + "filament_cost": [ + "30" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "overhang_fan_speed": [ + "90" + ], + "nozzle_temperature": [ + "220" + ], + "temperature_vitrification": [ + "80" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet_other @S1.json new file mode 100644 index 0000000000..e5abf0d738 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pet_other @S1.json @@ -0,0 +1,88 @@ +{ + "type": "filament", + "name": "fdm_filament_pet_other @S1", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common_S1", + "filament_vendor": [ + "Other" + ], + "cool_plate_temp" : [ + "60" + ], + "eng_plate_temp" : [ + "0" + ], + "hot_plate_temp" : [ + "75" + ], + "textured_plate_temp" : [ + "80" + ], + "cool_plate_temp_initial_layer" : [ + "60" + ], + "eng_plate_temp_initial_layer" : [ + "0" + ], + "hot_plate_temp_initial_layer" : [ + "75" + ], + "textured_plate_temp_initial_layer" : [ + "80" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PETG" + ], + "filament_density": [ + "1.27" + ], + "filament_cost": [ + "30" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "overhang_fan_speed": [ + "90" + ], + "nozzle_temperature": [ + "230" + ], + "temperature_vitrification": [ + "80" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json new file mode 100644 index 0000000000..c7b0cf5b7f --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json @@ -0,0 +1,97 @@ +{ + "type": "filament", + "name": "fdm_filament_pla @S1", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common_S1", + "filament_vendor": [ + "FlyingBear" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PLA" + ], + "filament_density": [ + "1.24" + ], + "filament_cost": [ + "20" + ], + "cool_plate_temp" : [ + "60" + ], + "eng_plate_temp" : [ + "60" + ], + "hot_plate_temp" : [ + "60" + ], + "textured_plate_temp" : [ + "60" + ], + "cool_plate_temp_initial_layer" : [ + "60" + ], + "eng_plate_temp_initial_layer" : [ + "60" + ], + "hot_plate_temp_initial_layer" : [ + "65" + ], + "textured_plate_temp_initial_layer" : [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "200" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "nozzle_temperature": [ + "195" + ], + "temperature_vitrification": [ + "60" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "8" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json new file mode 100644 index 0000000000..0d863dbccf --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json @@ -0,0 +1,97 @@ +{ + "type": "filament", + "name": "fdm_filament_pla_Hyper @S1", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common_S1", + "filament_vendor": [ + "FlyingBear" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PLA" + ], + "filament_density": [ + "1.24" + ], + "filament_cost": [ + "20" + ], + "cool_plate_temp" : [ + "60" + ], + "eng_plate_temp" : [ + "60" + ], + "hot_plate_temp" : [ + "60" + ], + "textured_plate_temp" : [ + "60" + ], + "cool_plate_temp_initial_layer" : [ + "60" + ], + "eng_plate_temp_initial_layer" : [ + "60" + ], + "hot_plate_temp_initial_layer" : [ + "65" + ], + "textured_plate_temp_initial_layer" : [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "200" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "nozzle_temperature": [ + "195" + ], + "temperature_vitrification": [ + "60" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "8" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json new file mode 100644 index 0000000000..84a6c7895b --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json @@ -0,0 +1,97 @@ +{ + "type": "filament", + "name": "fdm_filament_pla_Hyper_other @S1", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common_S1", + "filament_vendor": [ + "Other" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PLA" + ], + "filament_density": [ + "1.24" + ], + "filament_cost": [ + "20" + ], + "cool_plate_temp" : [ + "60" + ], + "eng_plate_temp" : [ + "60" + ], + "hot_plate_temp" : [ + "60" + ], + "textured_plate_temp" : [ + "60" + ], + "cool_plate_temp_initial_layer" : [ + "60" + ], + "eng_plate_temp_initial_layer" : [ + "60" + ], + "hot_plate_temp_initial_layer" : [ + "65" + ], + "textured_plate_temp_initial_layer" : [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "nozzle_temperature": [ + "205" + ], + "temperature_vitrification": [ + "60" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "8" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json new file mode 100644 index 0000000000..8966450832 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json @@ -0,0 +1,97 @@ +{ + "type": "filament", + "name": "fdm_filament_pla_other @S1", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common_S1", + "filament_vendor": [ + "Other" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PLA" + ], + "filament_density": [ + "1.24" + ], + "filament_cost": [ + "20" + ], + "cool_plate_temp" : [ + "60" + ], + "eng_plate_temp" : [ + "60" + ], + "hot_plate_temp" : [ + "60" + ], + "textured_plate_temp" : [ + "60" + ], + "cool_plate_temp_initial_layer" : [ + "60" + ], + "eng_plate_temp_initial_layer" : [ + "60" + ], + "hot_plate_temp_initial_layer" : [ + "65" + ], + "textured_plate_temp_initial_layer" : [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "nozzle_temperature": [ + "205" + ], + "temperature_vitrification": [ + "60" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "8" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu @S1.json new file mode 100644 index 0000000000..cb6104e08c --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu @S1.json @@ -0,0 +1,98 @@ +{ + "type": "filament", + "name": "fdm_filament_tpu @S1", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common_S1", + "filament_vendor": [ + "FlyingBear" + ], + "cool_plate_temp" : [ + "30" + ], + "eng_plate_temp" : [ + "30" + ], + "hot_plate_temp" : [ + "40" + ], + "textured_plate_temp" : [ + "35" + ], + "cool_plate_temp_initial_layer" : [ + "30" + ], + "eng_plate_temp_initial_layer" : [ + "30" + ], + "hot_plate_temp_initial_layer" : [ + "40" + ], + "textured_plate_temp_initial_layer" : [ + "35" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_max_volumetric_speed": [ + "3.2" + ], + "filament_type": [ + "TPU" + ], + "filament_density": [ + "1.24" + ], + "filament_cost": [ + "20" + ], + + "nozzle_temperature_initial_layer": [ + "210" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "nozzle_temperature": [ + "210" + ], + "temperature_vitrification": [ + "60" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "filament_z_hop": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "overhang_fan_threshold": [ + "95%" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu_other @S1.json new file mode 100644 index 0000000000..2f449cb2f2 --- /dev/null +++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_tpu_other @S1.json @@ -0,0 +1,98 @@ +{ + "type": "filament", + "name": "fdm_filament_tpu_other @S1", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common_S1", + "filament_vendor": [ + "Other" + ], + "cool_plate_temp" : [ + "30" + ], + "eng_plate_temp" : [ + "30" + ], + "hot_plate_temp" : [ + "40" + ], + "textured_plate_temp" : [ + "35" + ], + "cool_plate_temp_initial_layer" : [ + "30" + ], + "eng_plate_temp_initial_layer" : [ + "30" + ], + "hot_plate_temp_initial_layer" : [ + "40" + ], + "textured_plate_temp_initial_layer" : [ + "35" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_max_volumetric_speed": [ + "3.2" + ], + "filament_type": [ + "TPU" + ], + "filament_density": [ + "1.24" + ], + "filament_cost": [ + "20" + ], + + "nozzle_temperature_initial_layer": [ + "220" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "nozzle_temperature": [ + "220" + ], + "temperature_vitrification": [ + "60" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "filament_z_hop": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "overhang_fan_threshold": [ + "95%" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json new file mode 100644 index 0000000000..cd22b44df9 --- /dev/null +++ b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json @@ -0,0 +1,212 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "FlyingBear S1 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "FlyingBear S1", + + + + + "auxiliary_fan": "1", + "bed_exclude_area": [ + "0x0" + ], + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0", + "change_filament_gcode": "", + "cooling_tube_length": "5", + "cooling_tube_retraction": "91.5", + "default_filament_profile": [ + "FlyingBear PLA @S1" + ], + "default_print_profile": "0.20mm Standard @FlyingBear S1", + "deretraction_speed": [ + "30" + ], + "enable_filament_ramming": "1", + "extra_loading_move": "-2", + "extruder_clearance_height_to_lid": "69", + "extruder_clearance_height_to_rod": "69", + "extruder_clearance_radius": "49", + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + + "high_current_on_filament_swap": "0", + + + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "machine_end_gcode": "PRINT_END", + "machine_load_filament_time": "0", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "200" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "0.4" + ], + "machine_max_speed_e": [ + "30", + "25" + ], + "machine_max_speed_x": [ + "600", + "200" + ], + "machine_max_speed_y": [ + "600", + "200" + ], + "machine_max_speed_z": [ + "20", + "12" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "machine_pause_gcode": "PAUSE", + "machine_start_gcode": ";v2.8-20240219-3;\n;wiping nozzle start\nM106 P3 S0\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F6000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F6000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[0] + 60,print_bed_max[0])} F6000 \nG1 Z0.2 F600\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR \nBED_MESH_PROFILE LOAD=default # bedmesh load\nG92 E0 ;Reset Extruder\nG1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\nG92 E0 ;reset extruder\nG1 E4 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[0] + 60,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n", + "machine_unload_filament_time": "0", + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + + "nozzle_diameter": [ + "0.4" + ], + "nozzle_hrc": "0", + "nozzle_type": "brass", + "nozzle_volume": "151.32", + "parking_pos_retraction": "92", + + "print_host_webui": "", + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + + "printer_notes": "", + "printer_settings_id": "FlyingBear S1 0.4 nozzle", + "printer_technology": "FFF", + "printer_variant": "0.4", + "printhost_apikey": "", + "printhost_authorization_type": "key", + "printhost_cafile": "", + "printhost_password": "", + "printhost_port": "", + "printhost_ssl_ignore_revoke": "0", + "printhost_user": "", + "purge_in_prime_tower": "1", + "retract_before_wipe": [ + "0%" + ], + "retract_length_toolchange": [ + "0" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "249" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_length": [ + "0.5" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "30" + ], + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "template_custom_gcode": "", + "thumbnails": [ + "300x300" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "version": "1.6.0.0", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ] +} diff --git a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1.json b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1.json new file mode 100644 index 0000000000..d17147dae3 --- /dev/null +++ b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "FlyingBear S1", + "model_id": "FlyingBear_S1", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "FlyingBearDesign", + "bed_model": "FlyingBear S1-bed.stl", + "bed_texture": "FlyingBear S1-texture.png", + "hotend_model": "", + "default_materials": "FlyingBear Generic ABS;FlyingBear Generic PA-CF;FlyingBear Generic PC;FlyingBear Generic PETG;FlyingBear Generic PLA;InFlyingBearfiMech Generic TPU" +} \ No newline at end of file diff --git a/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json b/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json new file mode 100644 index 0000000000..1e985f8ed1 --- /dev/null +++ b/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json @@ -0,0 +1,38 @@ +{ + "type": "process", + "setting_id": "GP005", + "name": "0.16mm Optimal @FlyingBear Reborn3", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_common", + + "overhang_1_4_speed": "50", + "accel_to_decel_enable": "0", + "bottom_shell_layers": "4", + "bridge_speed": "25", + "brim_object_gap": "0.1", + "exclude_object": "0", + "gap_infill_speed": "300", + "inner_wall_speed": "300", + "internal_bridge_speed": "50", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "is_custom_defined": "0", + "layer_height": "0.16", + "line_width": "0.42", + "outer_wall_line_width": "0.42", + "overhang_speed_classic": "0", + "precise_outer_wall": "0", + "print_flow_ratio": "0.95", + "seam_gap": "10%", + "skirt_speed": "50", + "sparse_infill_speed": "330", + "support_line_width": "0.42", + "top_shell_thickness": "0.8", + "top_surface_line_width": "0.42", + "compatible_printers": [ + "FlyingBear Reborn3 0.4 nozzle" + ] + + +} diff --git a/resources/profiles/FlyingBear/process/S1/0.08mm Extra Fine @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.08mm Extra Fine @FlyingBear S1.json new file mode 100644 index 0000000000..c5922a7f85 --- /dev/null +++ b/resources/profiles/FlyingBear/process/S1/0.08mm Extra Fine @FlyingBear S1.json @@ -0,0 +1,32 @@ +{ + + "type": "process", + "setting_id": "GP004", + "name": "0.08mm Extra Fine @FlyingBear S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_common_S1", + + "bottom_shell_layers": "7", + "overhang_1_4_speed": "50", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "top_shell_layers": "9", + "top_shell_thickness": "0.8", + "tree_support_wall_count": "1", + "brim_width": "5", + "gap_infill_speed": "350", + "inner_wall_speed": "350", + "internal_solid_infill_speed": "350", + "layer_height": "0.08", + "print_settings_id": "0.08mm Extra Fine @FlyingBear S1", + "sparse_infill_speed": "450", + "exclude_object": "0", + "internal_bridge_speed": "50", + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] + + + +} diff --git a/resources/profiles/FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json new file mode 100644 index 0000000000..dad9af3e4d --- /dev/null +++ b/resources/profiles/FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json @@ -0,0 +1,31 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @FlyingBear S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_common_S1", + + "bottom_shell_layers": "5", + "overhang_1_4_speed": "50", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "top_shell_layers": "5", + "top_shell_thickness": "0.6", + "tree_support_wall_count": "0", + "brim_width": "5", + "gap_infill_speed": "350", + "inner_wall_speed": "350", + "internal_solid_infill_speed": "350", + "layer_height": "0.12", + "print_settings_id": "0.12mm Fine @FlyingBear S1", + "sparse_infill_speed": "400", + "exclude_object": "0", + "internal_bridge_speed": "50", + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] + + + +} diff --git a/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json new file mode 100644 index 0000000000..4ab7d1d88b --- /dev/null +++ b/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json @@ -0,0 +1,38 @@ +{ + "type": "process", + "setting_id": "GP005", + "name": "0.16mm Optimal @FlyingBear S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_common_S1", + + "overhang_1_4_speed": "50", + "accel_to_decel_enable": "0", + "bottom_shell_layers": "4", + "bridge_speed": "25", + "brim_object_gap": "0.1", + "exclude_object": "0", + "gap_infill_speed": "300", + "inner_wall_speed": "300", + "internal_bridge_speed": "50", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "300", + "is_custom_defined": "0", + "layer_height": "0.16", + "line_width": "0.42", + "outer_wall_line_width": "0.42", + "overhang_speed_classic": "0", + "precise_outer_wall": "0", + "print_flow_ratio": "0.95", + "seam_gap": "10%", + "skirt_speed": "50", + "sparse_infill_speed": "330", + "support_line_width": "0.42", + "top_shell_thickness": "0.8", + "top_surface_line_width": "0.42", + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] + + +} diff --git a/resources/profiles/FlyingBear/process/S1/0.20mm Standard @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.20mm Standard @FlyingBear S1.json new file mode 100644 index 0000000000..3092c240a6 --- /dev/null +++ b/resources/profiles/FlyingBear/process/S1/0.20mm Standard @FlyingBear S1.json @@ -0,0 +1,34 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @FlyingBear S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_common_S1", + + "bottom_shell_layers": "3", + "overhang_1_4_speed": "50", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "top_shell_layers": "5", + "top_shell_thickness": "1", + "tree_support_wall_count": "1", + "brim_width": "5", + "gap_infill_speed": "250", + "inner_wall_speed": "300", + "internal_solid_infill_speed": "250", + "layer_height": "0.2", + "print_settings_id": "0.20mm Standard @FlyingBear S1", + "sparse_infill_speed": "270", + "exclude_object": "0", + "internal_bridge_speed": "50", + "top_solid_infill_flow_ratio": "0.97", + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] + + + + + +} diff --git a/resources/profiles/FlyingBear/process/S1/0.24mm Draft @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.24mm Draft @FlyingBear S1.json new file mode 100644 index 0000000000..b662b2b615 --- /dev/null +++ b/resources/profiles/FlyingBear/process/S1/0.24mm Draft @FlyingBear S1.json @@ -0,0 +1,30 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @FlyingBear S1", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_common_S1", + + "bottom_shell_layers": "3", + "overhang_1_4_speed": "50", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "top_shell_layers": "4", + "top_shell_thickness": "1", + "tree_support_wall_count": "1", + "brim_width": "3", + "gap_infill_speed": "230", + "inner_wall_speed": "230", + "internal_solid_infill_speed": "230", + "layer_height": "0.24", + "print_settings_id": "0.24mm Draft @FlyingBear S1", + "sparse_infill_speed": "230", + "exclude_object": "0", + "internal_bridge_speed": "50", + "compatible_printers": [ + "FlyingBear S1 0.4 nozzle" + ] + + +} diff --git a/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json b/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json new file mode 100644 index 0000000000..3f0d859e0d --- /dev/null +++ b/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json @@ -0,0 +1,222 @@ +{ + "type": "process", + "name": "fdm_process_common_S1", + "from": "system", + "instantiation": "false", + + "accel_to_decel_enable": "0", + "accel_to_decel_factor": "50%", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "25", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "compatible_printers_condition": "", + "default_acceleration": "10000", + "default_jerk": "0", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "enable_arc_fitting": "1", + "enable_overhang_speed": "1", + "enable_prime_tower": "0", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "1", + "extra_perimeters_on_overhangs": "0", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_thickness": "0.3", + + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "0", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "50", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "50", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "10000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "interface_shells": "0", + "internal_bridge_speed": "50%", + "internal_bridge_support_thickness": "0.8", + "internal_solid_infill_acceleration": "100%", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "monotonic", + + "ironing_flow": "10%", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + + "overhang_4_4_speed": "10", + "overhang_speed_classic": "0", + "post_process": [], + "precise_outer_wall": "0", + "prime_tower_brim_width": "3", + "prime_tower_width": "35", + "prime_volume": "45", + "print_sequence": "by layer", + + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "2", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "seam_gap": "10%", + "seam_position": "aligned", + "single_extruder_multi_material_priming": "1", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + + "spiral_mode": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "-5", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "0", + "support_remove_small_overhang": "1", + "support_speed": "150", + "support_style": "default", + "support_threshold_angle": "30", + "support_top_z_distance": "0.2", + "support_type": "normal(auto)", + "thick_bridges": "0", + "timelapse_type": "0", + + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "200", + "travel_acceleration": "10000", + "travel_jerk": "12", + "travel_speed": "500", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "0", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "3", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "0", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + + "version": "1.6.0.0", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_infill_order": "inner wall/outer wall/infill", + "wall_loops": "2", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "0", + "wipe_tower_extra_spacing": "100%", + "wipe_tower_extruder": "0", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0", + "exclude_object": "1" +} \ No newline at end of file