diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot index 94a3e2e432..13ba15cd0e 100644 --- a/localization/i18n/OrcaSlicer.pot +++ b/localization/i18n/OrcaSlicer.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-29 10:45+0800\n" +"POT-Creation-Date: 2023-11-02 15:32+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -2940,7 +2940,7 @@ msgstr "" msgid "Size:" msgstr "" -#, possible-c-format, possible-boost-format +#, possible-boost-format msgid "" "Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " "separate the conflicted objects farther (%s <-> %s)." @@ -4750,6 +4750,15 @@ msgstr "" msgid "Units" msgstr "" +msgid "Home" +msgstr "" + +msgid "Default Page" +msgstr "" + +msgid "Set the page opened on startup." +msgstr "" + msgid "Zoom to mouse position" msgstr "" @@ -4764,6 +4773,12 @@ msgstr "" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" +msgid "Show splash screen" +msgstr "" + +msgid "Show the splash screen during startup." +msgstr "" + msgid "Show \"Tip of the day\" notification after start" msgstr "" @@ -5507,8 +5522,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "Line width" @@ -8002,10 +8017,10 @@ msgstr "" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" msgid "Support interface fan speed" diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po index cc011a660a..930eb81720 100644 --- a/localization/i18n/de/OrcaSlicer_de.po +++ b/localization/i18n/de/OrcaSlicer_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-29 10:45+0800\n" +"POT-Creation-Date: 2023-11-02 15:32+0100\n" "PO-Revision-Date: \n" "Last-Translator: Heiko Liebscher \n" "Language-Team: \n" @@ -3222,7 +3222,7 @@ msgstr "Volumen:" msgid "Size:" msgstr "Größe:" -#, c-format, boost-format +#, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please " "separate the conflicted objects farther (%s <-> %s)." @@ -3938,8 +3938,8 @@ msgstr "Laden fehlgeschlagen [%d]" msgid "You are going to delete %u file from printer. Are you sure to continue?" msgid_plural "" "You are going to delete %u files from printer. Are you sure to continue?" -msgstr[0] "" -msgstr[1] "" +msgstr[0] "Sie werden %u Datei vom Drucker löschen. Möchten Sie fortfahren?" +msgstr[1] "Sie werden %u Dateien vom Drucker löschen. Möchten Sie fortfahren?" msgid "Delete files" msgstr "Dateien löschen" @@ -4380,8 +4380,8 @@ msgstr[1] "%1$d Objekte haben gemalte Farben." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." msgid_plural "%1$d objects were loaded as parts of cut object" -msgstr[0] "" -msgstr[1] "" +msgstr[0] "%1$d Objekt wurde als Teil des geschnittenen Objekts geladen." +msgstr[1] "%1$d Objekte wurden als Teile des geschnittenen Objekts geladen." msgid "ERROR" msgstr "FEHLER" @@ -5186,6 +5186,15 @@ msgstr "Imperial" msgid "Units" msgstr "Einheiten" +msgid "Home" +msgstr "Startseite" + +msgid "Default Page" +msgstr "Standardseite" + +msgid "Set the page opened on startup." +msgstr "Legen Sie die Seite fest, die beim Start geöffnet wird." + msgid "Zoom to mouse position" msgstr "Zum Mausposition zoomen" @@ -5202,6 +5211,12 @@ msgstr "Freie Kamera verwenden" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "Wenn aktiviert, wird die freie Kamera verwendet." +msgid "Show splash screen" +msgstr "Splash-Screen anzeigen" + +msgid "Show the splash screen during startup." +msgstr "Zeige den Splash-Screen beim Start." + msgid "Show \"Tip of the day\" notification after start" msgstr "Benachrichtigung \"Tipp des Tages\" nach dem Start anzeigen" @@ -6054,13 +6069,13 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add Primitive" -"\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add " +"Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen " "\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste " -"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->" -"\"Timelapse Wischturm\" wählen." +"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-" +">\"Timelapse Wischturm\" wählen." msgid "Line width" msgstr "Breite der Linie" @@ -9008,13 +9023,13 @@ msgstr "Volle Lüfterdrehzahl ab Schicht" msgid "" "Fan speed will be ramped up linearly from zero at layer " -"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer" -"\". \"full_fan_speed_layer\" will be ignored if lower than " -"\"close_fan_the_first_x_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." +"\"close_fan_the_first_x_layers\" to maximum at layer " +"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower " +"than \"close_fan_the_first_x_layers\", in which case the fan will be running " +"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "" -"Die Lüftergeschwindigkeit wird linear von Null bei der Schicht" -"\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht " +"Die Lüftergeschwindigkeit wird linear von Null bei der " +"Schicht\"close_fan_the_first_x_layers\" auf das Maximum bei der Schicht " "\"full_fan_speed_layer\" erhöht. \"full_fan_speed_layer\" wird ignoriert, " "wenn es niedriger ist als \"close_fan_the_first_x_layers\",in diesem Fall " "läuft der Lüfter bei Schicht \"close_fan_the_first_x_layers\"+ 1 mit maximal " @@ -9673,6 +9688,9 @@ msgid "" "cooling is enabled, when printing overhangs and when feature speeds are not " "specified explicitly." msgstr "" +"Die minimale Druckgeschwindigkeit für das Filament, wenn die Verlangsamung " +"für eine bessere Schichtkühlung aktiviert ist, beim Drucken von Überhängen " +"und wenn die Funktionen nicht explizit angegeben sind." msgid "Nozzle diameter" msgstr "Düsendurchmesser" @@ -10357,7 +10375,7 @@ msgid "Close holes" msgstr "Löcher schließen" msgid "Z offset" -msgstr "" +msgstr "Z-Offset" msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " @@ -10365,6 +10383,11 @@ msgid "" "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" +"Dieser Wert wird zu allen Z-Koordinaten im Ausgabe-G-Code addiert (oder " +"subtrahiert). Er wird verwendet, um die schlechte Z-Endschalterposition zu " +"kompensieren: Wenn Ihr Endschalter-Nullpunkt tatsächlich die Düse 0,3 mm vom " +"Druckbett entfernt lässt, setzen Sie diesen Wert auf -0,3 (oder korrigieren " +"Sie Ihren Endschalter)." msgid "Enable support" msgstr "Stützstrukturen aktivieren"