GitHub-Proxy/OrcaSlicer
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/SoftFever/OrcaSlicer.git synced 2025-08-14 16:25:54 +08:00
Code Issues Packages Projects Releases Wiki Activity

Series of fixes for the Creality Ender 3 V3 SE (#4813)

Browse Source 
* e3v3se: disable m73 as not supported in FW

* e3v3se: remove thumbnails

Remove thumbnails generation to not confuse users.
Currently event CrealityPrint does not generate thumbnails for the E3 V3 SE.

* e3v3se: update motion capabilities

Update motion parameters for the Ender 3 V3 SE profiles:
 - max acceleration on all axis to 2500 as per product spec
 - max X and Y speeds to 250 as per product spec
 - max Z speed to 5 as set in factory defaults (M502, M503)
 - max E speed to 40 as presented in recommended print parameters on the
   product page

Product spec sheet:
    https://wiki.creality.com/en/ender-series/ender-3-v3-se/quick-start-guide/user-manual
This commit is contained in:
Dima Buzdyk 2024-04-09 17:42:22 +05:00 committed by GitHub
parent 78ee7f5074
commit 72933ebc85
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
4 changed files with 68 additions and 72 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json
View File

@ -28,44 +28,44 @@
"nozzle_type": "brass",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_retracting": [
"2500",
"2500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_x": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_y": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"100",
"100"
"40",
"40"
],
"machine_max_speed_x": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_y": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_z": [
"30",
"30"
"5",
"5"
],
"machine_max_jerk_e": [
"5",
@ -117,8 +117,7 @@
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
"scan_first_layer": "0",
"disable_m73": "1",
"thumbnails": [
"96x96",
"300x300"
]
}

35
resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json
View File

@ -28,44 +28,44 @@
"nozzle_type": "brass",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_retracting": [
"2500",
"2500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_x": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_y": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"100",
"100"
"40",
"40"
],
"machine_max_speed_x": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_y": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_z": [
"30",
"30"
"5",
"5"
],
"machine_max_jerk_e": [
"5",
@ -117,8 +117,7 @@
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
"scan_first_layer": "0",
"disable_m73": "1",
"thumbnails": [
"96x96",
"300x300"
]
}

35
resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json
View File

@ -28,44 +28,44 @@
"nozzle_type": "brass",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_retracting": [
"2500",
"2500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_x": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_y": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"100",
"100"
"40",
"40"
],
"machine_max_speed_x": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_y": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_z": [
"30",
"30"
"5",
"5"
],
"machine_max_jerk_e": [
"5",
@ -117,8 +117,7 @@
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
"scan_first_layer": "0",
"disable_m73": "1",
"thumbnails": [
"96x96",
"300x300"
]
}

35
resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json
View File

@ -28,44 +28,44 @@
"nozzle_type": "brass",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_retracting": [
"2500",
"2500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_x": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_y": [
"5000",
"5000"
"2500",
"2500"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"100",
"100"
"40",
"40"
],
"machine_max_speed_x": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_y": [
"500",
"500"
"250",
"250"
],
"machine_max_speed_z": [
"30",
"30"
"5",
"5"
],
"machine_max_jerk_e": [
"5",
@ -117,8 +117,7 @@
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
"scan_first_layer": "0",
"disable_m73": "1",
"thumbnails": [
"96x96",
"300x300"
]
}